SST IoT Development Board Experiments Using MicroPython

Python Installation Guide
Click Here

---

Microsoft Visual C++ 2010
Click Here

---

Installation of uPycraft IDE
Click Here

---

Flash/Upload MicroPython Firmware to ESP32
Click Here

---

SST IoT Development Board Pin Description

Components	GPIO PIN DESCRIPTION
Buzzer	14
Bluetooth	RX - 16, TX - 17
DHT 11	32
DC Motor	M1 - 25/33, M2 - 26/27
LCD	SCL - 22, SDA - 21
ON Board LED	02
OLED	SCL - 22, SDA - 21
RGB LED	4
RELAY	13
Servo Motor	S1 - 12, S2 - 2, S3 - 15
SD CARD	CS - 5, SCK - 18, MOSI - 23, MISO - 19
UART 0	TX0 - 01, RX0 - 03

Components	GPIN PIN DESCRIPTION
POT	34
PUSH BUTTON	35
LDR	36
Thermister	39

ISOLATED IO PINS	J19	J14
	GPIO18	GPIO3
	GPIO19	GPIO2
	GPIO23	GPIO1
	GPIO25	GPIO4
	GPIO26	GPIO5
	GPIO27	GPIO12
	GPIO32	GPIO13
	GPIO33	GPIO14
	GPIO34	GPIO15
	GPIO36	GPIO16
	GPIO39	GPIO17

Analog Inputs (ADC)	GPIO4	GPIO2	GPIO15	GPIO13	GPIO12
	GPIO14	GPIO27	GPIO26	GPIO25	GPIO33
	GPIO32	GPIO35	GPIO34	GPIO39	GPIO36

---

List of Experiments

No	Experiment Name
1	Program to OnBoard blink LED
2	Program to blink External LED
3	Program to Control LED using Button
4	Program for Boot Button LED
5	Program to Get input from two switches and switch on corresponding LEDs.
6	Program to Flash an LED at a given on time and off time cycle, where the two times are taken from a file.
7	Program to read Buntton 35
8	Program to Switch on a relay at a given time using sleep function, where the relay’s contact terminals are connected to a load.
9	Program for Buzzer
10	Program for Thermistor
11	Program for Light Dependent Resistor(LDR)
12	Program for I2C LCD Scan
13	Program for I2C LCD Display
14	Implement an intruder system that sends an alert to the given email
15	Control Relay Module with MicroPython Web Server
16	Program for Smoke Sensor
17	Program for Reaction Game - Single
18	Traffic Light
19	Traffic Puffin Crossing
20	Program for Burglar Alaram using ESP32
21	Program for DHT11

---

Program-1
Program to blink OnBoard LED
Source Code

---

Program-2
Program to blink External LED
Source Code

---

Program-3
Program to Control LED using Button
Source Code

---

Program-4
Program for Boot Button LED
Source Code

---

Program-5
Program to Get input from two switches and switch on corresponding LEDs.
Source Code

---

Program-6
Program to Flash an LED at a given on time and off time cycle, where the two times are taken from a file.
Source Code

---

Program-7
Program to read Buntton 35
Source Code

---

Program-8
Program to Switch on a relay at a given time using sleep function, where the relay’s contact terminals are connected to a load.
Source Code

---

Program-9
Program for Buzzer
Source Code

---

Program-10
Program for Thermistor
Source Code

---

Program-11
Program for Light Dependent Resistor(LDR)
Source Code

---

Program-12
Program for I2C LCD Scan
Source Code

---

Program-13
Program for I2C LCD Display
Main Code
Library File
Library File

---

Program-14
Implement an intruder system that sends an alert to the given email
Source Code

---

Program-15
Control Relay Module with MicroPython Web Server
Boot Code
Main Code

---

Program-16
Get an alarm from a remote area if smoke is detected.
Source Code

---

Program-17
Program for Reaction Game - Single
Source Code

---

Program-18
Traffic Light
Source Code

---

Program-19
Traffic Puffin Crossing
Source Code

---

Program-20
Program for Burglar Alaram using ESP32
Source Code

---

Program-21
Program for DHT11
Source Code

---

Don't forget to ⭐ this repo

---