Skip to content

Guide: Reformat minipupper (flash sd)

Jump to bottom
Pachoot edited this page Sep 23, 2022 · 1 revision

How to reformat minipupper

   Don't you dare go hollow!

Download this guide in PDF-form.

Initial setup

  1. Go to [this page]{.underline} and navigate to the "images" subfolder

  2. Download the newest version available with controller support. In our case it's "v2.0.1_minipupper_v1&v2_Controller"Billede

  3. Download and install [balenaEtcher]{.underline} for your operating system.

Flash the image onto the sd-card

  1. Once balenaEtcher is installed, you can open it the same way you opened Terminal. It should look like this: Billede

  2. Select "Flash from file" and select your os image.

  3. Click on "Select Target" and choose your usb or sd device.

  4. Finally, click Flash and wait for it to complete and verify. You should now be ready to configure the fresh system.

Clone this wiki locally