Do not merge - Waveshare s3 matrix

platformio.ini

@@ -91,6 +91,9 @@ build_flags =
   -DWLED_USE_MY_CONFIG
   -D WLED_PS_DONT_REPLACE_FX ; PS replacement FX are purely a flash memory saving feature, do not replace classic FX until we run out of flash
 
+default_usermods =
+  audioreactive = https://github.com/netmindz/WLED-AudioReactive-Usermod#audio-sources
+
 build_unflags =
 
 ldscript_1m128k = eagle.flash.1m128.ld
@@ -410,7 +413,7 @@ extends = env:nodemcuv2
 board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP8266_160\" #-DWLED_DISABLE_2D
   -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 
 [env:esp8266_2m]
 extends = esp8266
@@ -437,7 +440,7 @@ board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP02_160\"
   -D WLED_DISABLE_PARTICLESYSTEM1D
   -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 
 [env:esp8266_2m_min]
 ;; Minimal-feature build for ESP02 (2MB flash).
@@ -489,12 +492,12 @@ build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=
   -D WLED_DISABLE_PARTICLESYSTEM1D
   -D WLED_DISABLE_PARTICLESYSTEM2D
   -D WLED_DISABLE_PIXELFORGE
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 
 [env:esp32dev]
 extends = esp32
 board = esp32dev
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32\" #-D WLED_DISABLE_BROWNOUT_DET
               -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
 board_build.partitions = ${esp32.default_partitions}
@@ -529,7 +532,7 @@ board_build.f_flash = 80000000L
 extends = esp32
 board = esp32-poe
 upload_speed = 921600
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=\"ESP32_Ethernet\" -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
   -D SR_DMTYPE=-1 -D AUDIOPIN=-1 -D I2S_SDPIN=-1 -D I2S_WSPIN=-1 -D I2S_CKPIN=-1 -D MCLK_PIN=-1 ;; force AR to not allocate any PINs at startup
   -D DATA_PINS=4 ;; default led pin = 16 conflicts with pins used for ethernet
@@ -544,7 +547,7 @@ board = ttgo-t7-v14-mini32
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 board_build.partitions = ${esp32.extended_partitions}
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_WROVER\"
   -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
   -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html
@@ -572,7 +575,7 @@ board_build.flash_mode = qio ; qio is faster and works on almost all boards (som
 extends = esp32s3
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_16MB_opi\"
   -D WLED_WATCHDOG_TIMEOUT=0
   ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
@@ -589,7 +592,7 @@ board_build.flash_mode = qio
 extends = esp32s3
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_8MB_opi\"
   -D WLED_WATCHDOG_TIMEOUT=0
   ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
@@ -629,7 +632,7 @@ board_build.flash_mode = qio
 extends = esp32s3
 board = esp32s3camlcd ;; this is the only standard board with "opi_opi"
 board_build.arduino.memory_type = opi_opi
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_WROOM-2\"
   -D WLED_WATCHDOG_TIMEOUT=0
   -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
@@ -663,7 +666,7 @@ board_upload.maximum_size = 33554432
 ;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi)
 extends = esp32s3
 board = lolin_s3_mini ;; -S3 mini, 4MB flash 2MB PSRAM
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_4M_qspi\"
   -DARDUINO_USB_CDC_ON_BOOT=1 ;; -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
@@ -693,7 +696,7 @@ extends = esp32s2
 board = lolin_s2_mini
 board_build.flash_mode = qio
 board_build.f_flash = 80000000L
-custom_usermods = audioreactive
+custom_usermods = ${common.default_usermods}
 build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S2\"
   -DARDUINO_USB_CDC_ON_BOOT=1
   -DARDUINO_USB_MSC_ON_BOOT=0
@@ -798,6 +801,7 @@ build_unflags = ${env:esp32S3_wroom2_32MB.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} ${hub75.build_flags} ${hub75.s3_build_flags} ${hub75.i2s_disable_flags}
   -D WLED_RELEASE_NAME=\"ESP32-S3_Waveshare_HUB75\"
   -D WAVESHARE_S3_PINOUT
+  -D SR_DMTYPE=9
 ;  -D WLED_USE_SD_SPI
 ;  -D SD_PRINT_HOME_DIR
 ;  -D WLED_DEBUG