Measure temperature and humidity with the Sensiron SHT20 sensor.
- Temperature range: -40 to 125 C(-40 to 257 F)
- Humidity range: 0 to 100 % RH
- Temperature accuracy: ± 0.5% C
- Humidity accuracy: ± 5% RH
- Interface: I2C
- Voltage range: 2.1 - 3.6 V
An SHT20 sensor in a plastic enclosure with a 1m length of cable.
The device uses the Qwiic Connect System for wiring, it's an easy-to-use, polarized, push-to-fit connector. No more mistaken connections or soldering header pins.
Read the documentation on the [specifications] of the device.
The library to use it is in the Arduino and Particle.io IDE. A python and rust implementation for Raspberry Pi is available.
#include "uFire_SHT20.h"
uFire_SHT20 sht20;
Wire.begin();
sht20.begin();
float temp_c = sht20.temperature();
float rh = sht20.humidity();
Visit ufire.co and buy a board and probe.