Sigenergy Energy Storage System Integration for local Modbus‑TCP monitoring and control into Home Assistant. Gain real‑time insights, dynamic device management, and seamless UI‑based setup.

SiC dual 80kW (2x40kW), 600V, 3 phase traction inverter with FOC

A python library to access GivEnergy inverters via Modbus TCP on a local network, with no dependency on the GivEnergy Cloud.

In this project, we are going to build a pure sine wave inverter with a rating of 300W or 800VA. It is based on the EGS002 module

Monintor Hybrid inverters

Contains the code used to generate the results of the paper "Optimal Control of Grid-Interfacing Inverters with Current Magnitude Limits"

Felicity Inverter integration

Multi-Period Optimal Power Flow for Active Distribution Systems with Spatially Distributed Computation

Arduino eFlexPwm for Teensy 4.x

Simulations of the paper Partial Harmonic Current Compensation for Multifunctional Photovoltaic Inverters published in the IEEE Transactions on Power Electronics.

Contains the code used to generate the results of the paper "Safe Control of Grid-Interfacing Inverters with Current Magnitude Limits"

Kostal Plenticore Modbus Integration for Home Assistant

The firmware project for our capstone project titled 30kW custom inverter for formula electric race car

Curtail PV inverter during negative feed-in tariff

nRF24L01+ PCB for Raspberry Pi to use with aHoy

U-Power Utility Token will allow for incentivizing homeowners to use a smart meter to provide data, allow for distributed power back to grid, and incentive in tokens and discount rates.

PWM harmonic prediction in power electronics converter with motor load

Processor-in-the-Loop (PIL) implementation of a 10kVA Grid-Connected Inverter controller on TI C2000 F28379D. Features SRF-PLL and decoupled dq-frame current control.

An information panel on Raspberry PI for Huawei (and more) PV Inverters, using modbus tcp to connect

A set of programs to read and post the general status parameters of an Axpert Inverter-Charger through USB