Releases: shmoergh/moduleur
v1.1.1
Changelog
General
- Changed individual board versioning to
rev x(fromvx.x) to follow industry standards. No functionality changed (except with PSU — see below), and the version mapping follows thev1.xtorev (x+1)pattern:
| BEFORE | AFTER |
|---|---|
| v1.0 | REV 1 |
| V1.1 | REV 2 |
| V1.2 | REV 3 |
| V1.3 | REV 4 |
PSU — rev 3
- Minor placement update of R2 to work better with corner blocks of the enclosure. No functional update
v1.1.0
Changelog
PSU — v1.1
- Replaced 1N4001 with 1N5822 Schottky diode for overall better performance (faster switch, less temperature dissipation, better surge behavior, ~0.2V voltage drop)
- Added 1.5KE36A TVS at DC jack for ESD protection
VCA — v1.3
- Added test resistors to VCA output and VCA input
Brain — v1.3
- Added testing resistor and protection diode to pulse output on UI board
- Updated Mounting Hole H3 to connect to GND so it's not necessary to use wired connection to ground the front and backpanel.
v1.0.1
Changelog
- Corrected revision number for Brain boards
- Added fixlog (PCB errata) for earlier VCA and Brain boards
No functional changes compared to v1.0
License
Hardware is licensed under CC BY-NC 4.0
Software is licensed under MIT.
Disclaimer
All electronic projects and designs presented on this web site, or associated web sites should be considered dangerous if not lethal if not used safely. When working on projects based on the designs on this site, use extreme care to ensure that you do not come into contact with mains AC voltages or high voltage DC. If you are not confident about working with mains voltages, or high voltages, or you are not legally allowed to work with mains voltages, or high voltages, you are advised not to attempt work on them. The author, host, and all people associated with these web pages disclaim any liability for damages should anyone be killed or injured while working on these projects, or projects based on these designs, or any other project or design presented on these web pages and any associated web pages. The author, host, and all people associated with these web pages also disclaim any liability for projects, or projects based on these designs, or any other project or design presented on these web pages and any associated web pages when used in such a way as to infringe relevant government regulations and by-laws.
All circuits, schematics, printed circuit board, panel design and associated data published on this site can be used for private use only.
We are not responsible for any errors in the PCB design or the parts list. All responsibility for ordering PCBs, components, and assembly services rests solely with you.
Shmøergh Moduleur v1.0
🚀 This release marks the first stable version of the complete Shmøergh Moduleur analog synthesizer.
All core hardware and mechanical files are now considered buildable and verified in physical assemblies.
Included in v1.0
- Complete schematics (all modules)
- PCB layouts (production-ready)
- Gerber files
- Drill files
- Verified BOMs
- Mechanical enclosure files
- Module documentation
Validation Status
v1.0 reflects:
- Multiple fully assembled systems
- Confirmed mechanical fit
- Tested power and grounding scheme
This version is considered stable for independent DIY builds.
Notes
- Modules have independent versioning, check the module readme.
- Brain firmwares are available in independent repositories
License
Hardware is licensed under CC BY-NC 4.0
Software is licensed under MIT.
Disclaimer
All electronic projects and designs presented on this web site, or associated web sites should be considered dangerous if not lethal if not used safely. When working on projects based on the designs on this site, use extreme care to ensure that you do not come into contact with mains AC voltages or high voltage DC. If you are not confident about working with mains voltages, or high voltages, or you are not legally allowed to work with mains voltages, or high voltages, you are advised not to attempt work on them. The author, host, and all people associated with these web pages disclaim any liability for damages should anyone be killed or injured while working on these projects, or projects based on these designs, or any other project or design presented on these web pages and any associated web pages. The author, host, and all people associated with these web pages also disclaim any liability for projects, or projects based on these designs, or any other project or design presented on these web pages and any associated web pages when used in such a way as to infringe relevant government regulations and by-laws.
All circuits, schematics, printed circuit board, panel design and associated data published on this site can be used for private use only.
We are not responsible for any errors in the PCB design or the parts list. All responsibility for ordering PCBs, components, and assembly services rests solely with you.