address UH-1H new exports dependency on DCS-BIOS

.gitignore

@@ -41,3 +41,6 @@ luac.out
 
 # swap file
 *.*~
+
+# Working Files
+# *.psd

README.md

@@ -1,70 +1,52 @@
-# Deutsch
+# Community DCS-ExportScripts Library
 ---
-Dies ist ein universell einsetzbares Export Script für DCS.
-Es wird der gleichzeitige Export von Daten an Virtual Cockpit Software und I/O Hardware ermöglicht.
 
-Zur Zeit werden folgende Export-Formate unterstützt.
-- DAC (DCS Arcaze Connector) von [H-J-P](https://github.com/H-J-P/DAC/) um die Arcaze USB Controller anzusprechen (http://wiki.simple-solutions.de/en/products/Arcaze/Arcaze-USB)
-- Ikarus von [H-J-P](https://github.com/H-J-P/Ikarus), unsere Virtual Cockpit Software
-
-Der Export von Daten wird für folgende Module unterstützt:
-- A-10C
+See forums post here: https://forums.eagle.ru/topic/283178-dcs-exportscripts-for-stream-deck-community-github-library/
+Read the wiki for export IDs: https://github.com/asherao/DCS-ExportScripts/wiki
+
+This is based off of DCS-ExportScripts (https://github.com/s-d-a/DCS-ExportScripts/wiki). The main purpose is to make customized exports for DCS-Interface (https://github.com/charlestytler/streamdeck-dcs-interface) for use with an Elgato Stream Deck. 
+
+Following module export luas have been modified. Applicable DCS-ExportScripts ID is in parentheses. Due to the scope of the project, this is not the full list:
+- UH-60L Mod
+  - Added a lot of stuff. See Wiki for details: https://github.com/asherao/DCS-ExportScripts/wiki/MH-60L
+  - Added Streamdeck Profile: https://github.com/asherao/DCS-ExportScripts/blob/master/docu/StreamDeck%20Examples/MH-60L%20Mod%20by%20Bailey%20Release.streamDeckProfile
+- F-16C
+  - Added Flare and Chaff Count Readouts (3000 - 3006)
+  - Added SENPAI (Streamdeck Elevation Navigation Pressure Altimeter Instrument) (WIP) (44224 - 44231)
+  - Added Jammer pannel Tiles and example profile. See wiki. https://github.com/asherao/DCS-ExportScripts/wiki/F-16C
+  - Added UFC presets
+- F-86F Sabre
+  - Added UHF channel and freq export
+  - Added ADF freq export
+- JF-17
+  - Added JF-17
+- Mi-24P (Stream Deck profile released: https://www.digitalcombatsimulator.com/en/files/3317284/)
+  - Added DISS Info (3000 - 3002)
+  - Added Ammo Counter Readouts (3011 - 3015)
+  - Added Arc-15 Readouts (3020 - 3021)
+  - Added Flare and Chaff Count Readouts (3022 - 3025)
+  - Added SENPAI (Streamdeck Elevation Navigation Pressure Altimeter Instrument) (44224 - 44231)
+  - Added VRS Detection (3030)
+  - Added all radio exports (3031-3034)
+- Mosquito FB MkVI
+  - Added Mosquito FB MkVI
+  - Removed duplicate exports
+  - Read Wiki for Export IDs (https://github.com/asherao/DCS-ExportScripts/wiki/MosquitoFBMkVI)
+- Spitfire LF MkIX
+  - Read Wiki for Export IDs (https://github.com/asherao/DCS-ExportScripts/wiki/Spitfire-LF-MkIX)
 - AJS37
-- AV-8B N/A
-- Bf-109K-4
+  - corrected afterburner export
 - F/A-18C Hornet
-- F-5E-3
-- F-86F
-- FW-190D9
-- Ka-50
-- L-39C/ZA
-- Mi-8MT
-- MiG-15bis
-- MiG-21Bis
-- Mirage 2000
-- P-51D 25/30-NA
-- SA342L/M/Mistral
-- SpitfireLFMkIX/CW
-- Su-25T
-- TF-51D
-- UH-1H
-- alle Flaming Cliffs Flugzeuge + J-11A
-
-Kompatibel zur DCS World 2.5.4 und BETA Version
-
-# English
----
-This is an universally insertable export script for DCS. It allows for the simultaneous export of data at virtual cockpit software and I/O hardware.
+  - removed a duplicate export
+- F-14B
+  - Added radio freq text output (60000 - 60007)
 
-At present the following export formats are supported:
-- DAC (DCS Arcaze Connector) by [H-J-P](https://github.com/H-J-P/DAC/) to address the Arcaze USB Controller (http://wiki.simple-solutions.de/en/products/Arcaze/Arcaze-USB)
-- Ikarus by [H-J-P](https://github.com/H-J-P/Ikarus), our virtual cockpit software
+More info about SENPAI (https://forums.eagle.ru/topic/273399-stream-deck-altimeter-setting-in-inhg-and-hpa/?tab=comments#comment-4724094)
 
-Following moduls are supported:
-- A-10C
-- AJS37
-- AV-8B N/A
-- Bf-109K-4
-- F/A-18C Hornet
-- F-5E-3
-- F-86F
-- FW-190D9
-- Ka-50
-- L-39C/ZA
-- Mi-8MT
-- MiG-15bis
-- MiG-21Bis
-- Mirage 2000
-- P-51D 25/30-NA
-- SA342L/M/Mistral
-- SpitfireLFMkIX/CW
-- Su-25T
-- TF-51D
-- UH-1H
-- all Flaming Cliffs aircrafts + J-11A
-
-Compatible with DCS World 2.5.4 and BETA version
+Compatible with DCS World 2.9.5.55300
 
 # Wiki
 ---
-[DCS-ExportScript Wiki and Docu](https://github.com/s-d-a/DCS-ExportScripts/wiki) (in Deutsch and English)
+- https://github.com/asherao/DCS-ExportScripts/wiki
+- [DCS-ExportScript Wiki and Docu](https://github.com/s-d-a/DCS-ExportScripts/wiki) (in Deutsch and English)
+

Scripts/DCS-ExportScript/Config.lua

@@ -1,43 +1,43 @@
--- Ikarus and D.A.C. Export Script
---
--- Config File
---
--- Copyright by Michael aka McMicha 2014
--- Contact dcs2arcaze.micha@farbpigmente.org
-
-ExportScript.Config = {}
-ExportScript.Version.Config = "1.2.1"
-
--- Ikarus a Glass Cockpit Software
-ExportScript.Config.IkarusExport    = true         -- false for not use
-ExportScript.Config.IkarusHost      = "127.0.0.1"  -- IP for Ikarus
-ExportScript.Config.IkarusPort      = 1625         -- Port Ikarus (1625)
-ExportScript.Config.IkarusSeparator = ":"
-
--- D.A.C. (DCS Arcaze Connector)
-ExportScript.Config.DACExport        = false        -- true for use
-ExportScript.Config.DAC              = {}
--- first hardware
-ExportScript.Config.DAC[1]           = {}
-ExportScript.Config.DAC[1].Host      = "127.0.0.1" -- IP for hardware 1
-ExportScript.Config.DAC[1].SendPort  = 26026       -- Port for hardware 1
-ExportScript.Config.DAC[1].Separator = ":"
--- secound to n hardware
---ExportScript.Config.DAC[2]           = {}
---ExportScript.Config.DAC[2].Host      = "127.0.0.1" -- IP for hardware 2
---ExportScript.Config.DAC[2].SendPort  = 9092        -- Port for hardware 2
---ExportScript.Config.DAC[2].Separator = ":"
-
--- Ikarus and D.A.C. can data send
-ExportScript.Config.Listener         = true         -- false for not use
-ExportScript.Config.ListenerPort     = 26027        -- Listener Port for D.A.C.
-
--- Other
-ExportScript.Config.ExportInterval         = 0.05	-- export evry 0.05 secounds
-ExportScript.Config.ExportLowTickInterval  = 0.5	-- export evry 0.5 secounds
-ExportScript.Config.LogPath                = lfs.writedir()..[[Logs\Export.log]]
-ExportScript.Config.ExportModulePath       = lfs.writedir()..[[Scripts\DCS-ExportScript\ExportsModules\]]
-ExportScript.Config.Debug                  = false
-ExportScript.Config.SocketDebug            = false
-ExportScript.Config.FirstNewDataSend       = true
+-- Ikarus and D.A.C. Export Script
+--
+-- Config File
+--
+-- Copyright by Michael aka McMicha 2014
+-- Contact dcs2arcaze.micha@farbpigmente.org
+
+ExportScript.Config = {}
+ExportScript.Version.Config = "1.2.1"
+
+-- Ikarus a Glass Cockpit Software
+ExportScript.Config.IkarusExport    = true         -- false for not use
+ExportScript.Config.IkarusHost      = "127.0.0.1"  -- IP for Ikarus
+ExportScript.Config.IkarusPort      = 1725         -- Port Ikarus (1625)
+ExportScript.Config.IkarusSeparator = ":"
+
+-- D.A.C. (DCS Arcaze Connector)
+ExportScript.Config.DACExport        = false        -- true for use
+ExportScript.Config.DAC              = {}
+-- first hardware
+ExportScript.Config.DAC[1]           = {}
+ExportScript.Config.DAC[1].Host      = "127.0.0.1" -- IP for hardware 1
+ExportScript.Config.DAC[1].SendPort  = 26026       -- Port for hardware 1
+ExportScript.Config.DAC[1].Separator = ":"
+-- secound to n hardware
+--ExportScript.Config.DAC[2]           = {}
+--ExportScript.Config.DAC[2].Host      = "127.0.0.1" -- IP for hardware 2
+--ExportScript.Config.DAC[2].SendPort  = 9092        -- Port for hardware 2
+--ExportScript.Config.DAC[2].Separator = ":"
+
+-- Ikarus and D.A.C. can data send
+ExportScript.Config.Listener         = true         -- false for not use
+ExportScript.Config.ListenerPort     = 26027        -- Listener Port for D.A.C.
+
+-- Other
+ExportScript.Config.ExportInterval         = 0.05	-- export evry 0.05 secounds
+ExportScript.Config.ExportLowTickInterval  = 0.1	-- export evry 0.5 secounds
+ExportScript.Config.LogPath                = lfs.writedir()..[[Logs\Export.log]]
+ExportScript.Config.ExportModulePath       = lfs.writedir()..[[Scripts\DCS-ExportScript\ExportsModules\]]
+ExportScript.Config.Debug                  = false
+ExportScript.Config.SocketDebug            = false
+ExportScript.Config.FirstNewDataSend       = true
 ExportScript.Config.FirstNewDataSendCount  = 100

Scripts/DCS-ExportScript/ExportScript.lua

@@ -30,6 +30,8 @@ PrevExport.LuaExportStart           = LuaExportStart
 PrevExport.LuaExportStop            = LuaExportStop
 PrevExport.LuaExportBeforeNextFrame = LuaExportBeforeNextFrame
 PrevExport.LuaExportAfterNextFrame  = LuaExportAfterNextFrame
+--fix wwt
+PrevExport.LuaExportActivityNextEvent  = LuaExportActivityNextEvent
 
 dofile(lfs.writedir()..[[Scripts\DCS-ExportScript\Config.lua]])
 ExportScript.utf8 = dofile(lfs.writedir()..[[Scripts\DCS-ExportScript\lib\utf8.lua]])
@@ -133,7 +135,11 @@ function LuaExportActivityNextEvent(t)
 	end
 
 	tNext = tNext + ExportScript.Config.ExportInterval
-
+
+	if PrevExport.LuaExportActivityNextEvent then
+		tNext=PrevExport.LuaExportActivityNextEvent(t)
+	end
+
 	return tNext
 end
 
@@ -170,4 +176,4 @@ function LuaExportStop()
 	if PrevExport.LuaExportStop then
 		PrevExport.LuaExportStop()
 	end
-end
+end

Scripts/DCS-ExportScript/ExportsModules/A-10A.lua

@@ -781,6 +781,8 @@ function ExportScript.AF.MechanicalDevicesIndicator(FunctionTyp)
 		ExportScript.Tools.SendData(502, (lMechInfo.gear.value > 0.95 and 1 or 0) ) -- left gear
 		ExportScript.Tools.SendData(503, (lMechInfo.gear.value == 1 and 1 or 0) )   -- right gear
 
+		ExportScript.Tools.SendData(510, (lMechInfo.speedbrakes.value  > 0.1 and 1 or 0) ) -- speedbreakes on > 0.1 (0 - 1)
+
 		local lFlapsValue	= lMechInfo.flaps.value
 		lFlapsValue = lFlapsValue / 1.6
 		lFlapsValue = (lFlapsValue > 1.0 and 1.0 or lFlapsValue)	-- the result is limited to 1.0