linux-qcom-6.18 : update to tag qcom-6.18.y-20260601 v6.18.30

[sgaud-quic]

Move to the latest linux-qcom-6.18 release tag qcom-6.18.y-20260601

Changelog:
Merge tag 'v6.18.30' into qcom-6.18.y
FROMLIST: arm64: dts: qcom: talos: Add GEM_NOC interconnect for adreno SMMU
FROMLIST: arm64: dts: qcom: monaco: Add GEM_NOC interconnect for adreno SMMU
FROMLIST: arm64: dts: qcom: lemans: Add GEM_NOC interconnect for adreno SMMU
FROMLIST: arm64: dts: qcom: kodiak: Add GEM_NOC interconnect for adreno SMMU
PENDING: arm64: defconfig: select INTERCONNECT_QCOM_SHIKRA as built-in
QCLINUX: arm64: dts: qcom: add purwa CAMX EL2 overlay
FROMLIST: arm64: dts: qcom: shikra: enable WiFi on EVK boards
FROMLIST: arm64: dts: qcom: shikra: add WiFi node support
FROMLIST: arm64: dts: qcom: shikra: Enable BT support on EVK boards
FROMLIST: arm64: dts: qcom: shikra: Enable TSENS and thermal zones
FROMLIST: arm64: dts: qcom: shikra-iqs: Enable CDSP, LPAICP and MPSS
FROMLIST: arm64: dts: qcom: shikra-cqs: Enable CDSP, LPAICP and MPSS
FROMLIST: arm64: dts: qcom: shikra-cqm: Enable CDSP, LPAICP and MPSS
FROMLIST: arm64: dts: qcom: shikra: Add CDSP, LPAICP, MPSS remoteproc PAS nodes
FROMLIST: arm64: dts: qcom: shikra: Add SMP2P nodes
FROMLIST: arm64: dts: qcom: shikra: Add CPU OPP tables to scale DDR/L3
FROMLIST: arm64: dts: qcom: shikra: Add EPSS L3 interconnect provider node
FROMLIST: arm64: dts: qcom: shikra: Add DDR BWMON support
FROMLIST: arm64: dts: qcom: shikra: Add cpufreq scaling node
FROMLIST: arm64: dts: qcom: Add QUPv3 configuration for Shikra
FROMLIST: dt-bindings: interconnect: qcom-bwmon: Add Shikra cpu-bwmon compatible
FROMLIST: dt-bindings: dma: qcom,gpi: Document GPI DMA engine for Shikra SoC
FROMLIST: interconnect: qcom: Add EPSS L3 scaling support for Shikra SoC
FROMLIST: dt-bindings: interconnect: qcom,shikra-epss-l3: Add EPSS L3 DT binding
FROMLIST: pinctrl: qcom: Unconditionally mark gpio as wakeup enable
FROMLIST: soc: qcom: smem: Switch partitions to xarray
FROMLIST: media: venus: prefer iris driver for qcm2290 when IRIS is enabled
FROMLIST: dt-bindings: media: qcom,qcm2290-venus: document shikra Iris compatible
FROMLIST: dt-bindings: arm-smmu: Add adreno-smmu compatible for Qualcomm Shikra
FROMLIST: regulator: qcom_usb_vbus: add support for qcom,pm4125-vbus-reg
FROMLIST: dt-bindings: regulator: qcom,usb-vbus-regulator: add qcom,pm4125-vbus-reg
FROMLIST: arm64: dts: qcom: shikra: Add ICE, TRNG and QCE nodes
FROMLIST: dt-bindings: dma: qcom,bam-dma: Increase iommus maxItems to seven
FROMLIST: dt-bindings: crypto: qcom-qce: Document the Shikra crypto engine
FROMLIST: dt-bindings: crypto: qcom,prng: Document Shikra TRNG
FROMLIST: dt-bindings: crypto: qcom,inline-crypto-engine: Document Shikra ICE
FROMLIST: dt-bindings: thermal: qcom-tsens: Document the Shikra Temperature Sensor
FROMLIST: remoteproc: qcom: pas: Add Shikra remoteproc support
FROMLIST: dt-bindings: remoteproc: qcom,shikra-pas: Document Shikra PAS remoteprocs
FROMLIST: clk: qcom: Add support for GPU Clock Controller on Shikra
FROMLIST: clk: qcom: Add support for Display Clock Controller on Shikra
FROMLIST: dt-bindings: clock: qcom: Add Shikra GPU clock controller
FROMLIST: dt-bindings: clock: qcom: Add Shikra Display clock controller
FROMLIST: arm64: dts: qcom: Add Shikra EVK boards
FROMLIST: arm64: dts: qcom: Add Shikra IQ2390S SoM platform
FROMLIST: arm64: dts: qcom: Add Shikra CQ2390M SoM platform
FROMLIST: arm64: dts: qcom: Introduce Shikra SoC base dtsi
FROMLIST: dt-bindings: arm: qcom: Document Shikra and its EVK boards
FROMLIST: dt-bindings: mmc: sdhci-msm: Document the Shikra compatible
FROMLIST: dt-bindings: cache: qcom,llcc: Document Shikra LLCC
FROMLIST: dt-bindings: nvmem: qcom,qfprom: Add Shikra compatible
FROMLIST: dt-bindings: watchdog: qcom-wdt: Document Shikra watchdog
FROMLIST: dt-bindings: mfd: qcom,tcsr: Add compatible for Shikra
FROMLIST: dt-bindings: firmware: qcom,scm: Document SCM on Shikra SoC
FROMLIST: cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
FROMLIST: dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
FROMLIST: dt-bindings: sram: Document qcom,shikra-imem compatible
FROMLIST: dt-bindings: arm-smmu: qcom: Add compatible for Qualcomm Shikra SoC
FROMLIST: dt-bindings: usb: qcom,snps-dwc3: Add Shikra compatible
FROMLIST: phy: qcom: qmp-usbc: Add qmp configuration for Shikra
FROMLIST: phy: qcom-qusb2: Add support for Shikra
FROMLIST: dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for Shikra
FROMLIST: dt-bindings: phy: qcom,qusb2: Document QUSB2 Phy for Shikra
FROMLIST: dt-bindings: mailbox: qcom: Add Shikra APCS compatible
FROMLIST: dt-bindings: remoteproc: Add Shikra RPM processor compatible
FROMLIST: dt-bindings: soc: qcom: smd-rpm: Add Shikra rpm-smd compatible
FROMLIST: clk: qcom: Add Global clock controller support on Qualcomm Shikra SoC
FROMLIST: clk: qcom: smd-rpm: Add support for RPM clocks on Qualcomm Shikra SoC
FROMLIST: dt-bindings: clock: qcom: Add Qualcomm Shikra SoC Global Clock Controller
FROMLIST: dt-bindings: clock: qcom,rpmcc: Add Qualcomm Shikra SoC RPMCC
FROMLIST: pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
FROMLIST: dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
FROMLIST: regulator: qcom_smd: Add PM8150 regulators
FROMLIST: dt-bindings: regulator: qcom,smd-rpm-regulator: Document PM8150 IC
FROMLIST: interconnect: qcom: add Shikra interconnect provider driver
FROMLIST: dt-bindings: interconnect: document the RPM Network-On-Chip interconnect in Shikra SoC
FROMLIST: pinctrl: qcom: Add Shikra pinctrl driver
FROMLIST: dt-bindings: pinctrl: qcom: Document Shikra Top Level Mode Multiplexer
FROMLIST: soc: qcom: socinfo: Add SoC ID for Shikra IoT variants
FROMLIST: dt-bindings: arm: qcom,ids: Add SoC ID for Shikra IoT variants
FROMLIST: wifi: ath11k: raise max vdevs to 4 on hardware with P2P and dual-station support
FROMLIST: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context
Revert "FROMLIST: misc: fastrpc: Add reference counting for fastrpc_user structure"
FROMLIST: arm64: dts: qcom: lemans: enable EUD support
FROMLIST: iommu/arm-smmu: Add interconnect bandwidth voting support
FROMLIST: dt-bindings: iommu: arm,smmu: Document optional interconnects property
QCLINUX: arm64: configs: Add Linux software RAID support
FROMLIST: arm64: dts: qcom: qcs6490-rb3gen2: Add WCD headset playback and record for qcs6490-rb3gen2 industrial mezzanine
FROMLIST: Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling
FROMLIST: Bluetooth: hci_qca: Convert timeout from jiffies to ms
FROMLIST: wifi: ath12k: enable threaded NAPI when DP IRQ affinity is unavailable
FROMLIST: genirq: export irq_can_set_affinity() for module drivers
QCLINUX: arm64: dts: qcom: add hamoa CAMX EL2 overlay
FROMLIST: arm64: dts: qcom: monaco: fix wrong connection for the replicator
BACKPORT: arm64: dts: qcom: monaco: Add CTCU and ETR nodes
BACKPORT: dt-bindings: arm: add CTCU device for monaco
BACKPORT: phy: qcom: edp: Add PHY-specific LDO config for eDP low vdiff
BACKPORT: phy: qcom: edp: Fix AUX_CFG8 programming for DP mode
BACKPORT: phy: qcom: edp: Add SC7280/SC8180X swing/pre-emphasis tables
BACKPORT: phy: qcom: edp: Add eDP/DP mode switch support
BACKPORT: phy: qcom: edp: Unify generic DP/eDP swing and pre-emphasis tables
BACKPORT: phy: qcom: edp: Fix NULL pointer dereference for phy v6 (x1e80100)
BACKPORT: phy: qcom: edp: Add Glymur platform support
BACKPORT: phy: qcom-qmp: qserdes-com: Add v8 DP-specific qserdes register offsets
BACKPORT: phy: qcom: edp: Fix the DP_PHY_AUX_CFG registers count
FROMLIST: dt-bindings: phy: qcom-edp: Add reference clock for sa8775p eDP PHY
BACKPORT: dt-bindings: phy: Add DP PHY compatible for Glymur
Revert "FROMLIST: dt-bindings: phy: qcom-edp: Add eDP ref clk for sa8775p"
Revert "FROMLIST: phy: qcom: edp: Initialize swing_pre_emph_cfg for sc7280"
FROMLIST: fastrpc: Reduce log level for DSP info and reserved memory messages
FROMLIST: wifi: ath12k: fix peer_id usage in normal RX path
FROMLIST: wifi: ath12k: add channel 177 to the 5 GHz channel list

[github-actions]

Test run workflow

Test jobs for commit c25149a

qcom-distro
Pass: 8 | Fail: 1 | Total: 9

nodistro
Pass: 9 | Fail: 0 | Total: 9

qcom-distro_linux-qcom-6.18
Pass: 207 | Fail: 3 | Total: 239

[test-reporting-app]

Test Results

  103 files  +   44    632 suites  +351   5h 1m 13s ⏱️ + 2h 9m 30s
  125 tests +   20    125 ✅ +   28   0 💤  -  2  0 ❌  - 6 
6 023 runs  +3 377  5 982 ✅ +3 361  41 💤 +22  0 ❌  - 6 

Results for commit 46ea2ea. ± Comparison against base commit 79d0169.

This pull request removes 2 and adds 22 tests. Note that renamed tests count towards both.

lava ‑ auto-login-action
lava ‑ minimal-boot

10_Kubernetes_Kernel_Config ‑ Kubernetes_Kernel_Config
11_Logging_Journalctl_Validation ‑ Logging_Journalctl_Validation
12_Partition_PostBoot_Validation ‑ Partition_PostBoot_Validation
13_Boot_Systemd_KPI_Loop ‑ Boot_Systemd_KPI_Loop
5_OpenCV ‑ OpenCV
6_OpenCV ‑ OpenCV
6_irq ‑ irq
7_BT_ON_OFF ‑ BT_ON_OFF
7_irq ‑ irq
8_AudioRecord ‑ AudioRecord
…

♻️ This comment has been updated with latest results.

[github-actions]

Test run workflow

Test jobs for commit c25149a

qcom-distro
Pass: 275 | Fail: 2 | Total: 296

nodistro
Pass: 9 | Fail: 0 | Total: 9

qcom-distro_linux-qcom-6.18
Pass: 217 | Fail: 3 | Total: 249

[github-actions]

Test run workflow

Test jobs for commit c25149a

qcom-distro
Pass: 276 | Fail: 1 | Total: 296

nodistro
Pass: 9 | Fail: 0 | Total: 9

qcom-distro_linux-qcom-6.18
Pass: 217 | Fail: 3 | Total: 249

[github-actions]

Test run workflow

Test jobs for commit c25149a

qcom-distro
Pass: 276 | Fail: 1 | Total: 296

nodistro
Pass: 9 | Fail: 0 | Total: 9

qcom-distro_linux-qcom-6.18
Pass: 217 | Fail: 3 | Total: 249

[sgaud-quic]

@lumag / @vkraleti / @sbanerjeeqc please help with review on the PR.

[lumag]

Triggered one more test execuion. I'll merge once it is complete

[github-actions]

Test run workflow

Test jobs for commit c25149a

qcom-distro_linux-qcom-6.18
Pass: 214 | Fail: 2 | Total: 240

qcom-distro
Pass: 277 | Fail: 2 | Total: 296

nodistro
Pass: 9 | Fail: 0 | Total: 9

[lumag]

• IQ-8275-EVK, failed to handle UFS: https://lava.infra.foundries.io/scheduler/job/235805
• RB3 Gen2, reset after core_auth test: https://lava.infra.foundries.io/scheduler/job/235799
• QCS8300 Ride, failed 8_irq test: https://lava.infra.foundries.io/scheduler/job/235804

[github-actions]

Test run workflow

Test jobs for commit c25149a

qcom-distro_linux-qcom-6.18
Pass: 225 | Fail: 1 | Total: 249

qcom-distro
Pass: 277 | Fail: 2 | Total: 296

nodistro
Pass: 9 | Fail: 0 | Total: 9

[lumag]

• RB3 Gen2, failing 0_hotplug: https://lava.infra.foundries.io/scheduler/job/236168

[knaveen-qc]

• IQ-8275-EVK, failed to handle UFS: https://lava.infra.foundries.io/scheduler/job/235805
• RB3 Gen2, reset after core_auth test: https://lava.infra.foundries.io/scheduler/job/235799
• QCS8300 Ride, failed 8_irq test: https://lava.infra.foundries.io/scheduler/job/235804

@bhargav0610

Are these similar issues seen in other runs as well, need help for this data to co-relate these issues as baseline issue or specific to this PR only

[knaveen-qc]

• RB3 Gen2, failing 0_hotplug: https://lava.infra.foundries.io/scheduler/job/236168

@bhargav0610

Same information needed for this issue also to co-relate this issue as baseline issue or specific to this PR only

[smuppand]

• RB3 Gen2, failing 0_hotplug: https://lava.infra.foundries.io/scheduler/job/236168

@bhargav0610

Same information needed for this issue also to co-relate this issue as baseline issue or specific to this PR only

This issue is seen even on other PRs too. Noticed that hotplug is being executed as the first test, right after we get the serial shell. We need to adjust the sequence too.

I retriggered this on the same build, and it passed https://lava.infra.foundries.io/scheduler/job/236861#L2703.

[lumag]

I retriggered this on the same build, and it passed https://lava.infra.foundries.io/scheduler/job/236861#L2703.

Such behaviour can point out a flake (in the kernel, in the userspace or in the test). I'm pointing out the issues which should be reported to the isuse tracker and then fixed.

[smuppand]

I retriggered this on the same build, and it passed https://lava.infra.foundries.io/scheduler/job/236861#L2703.

Such behaviour can point out a flake (in the kernel, in the userspace or in the test). I'm pointing out the issues which should be reported to the isuse tracker and then fixed.

The failures have been reported and are being tracked through GH issues. The enhancements are complete, and the tag update PR #2303 will include these changes.
qualcomm-linux/kernel#629
qualcomm-linux/kernel#630

[sgaud-quic]

• IQ-8275-EVK, failed to handle UFS: https://lava.infra.foundries.io/scheduler/job/235805
• RB3 Gen2, reset after core_auth test: https://lava.infra.foundries.io/scheduler/job/235799
• QCS8300 Ride, failed 8_irq test: https://lava.infra.foundries.io/scheduler/job/235804

We have created below github issues to track these failures :

1. UFS issue : [qcom-6.18.y][monaco-evk] UFS Initialization Failed kernel#627
   Analysis from storage team is updated on the issue, and triage is in progress.
2. RB3Gen2: [qcom-6.18.y][rb3gen2] Device reset after Display GFX Tests kernel#628
   Probable fix for this issue is merged in latest tag and PR is updated with it.

Other 2 issues are fixed from test infra side and updated in the issues below :
qualcomm-linux/kernel#629
qualcomm-linux/kernel#630

[github-actions]

Test run workflow

Test jobs for commit 46ea2ea

qcom-distro_linux-qcom-6.18
Pass: 231 | Fail: 0 | Total: 249

qcom-distro
Pass: 265 | Fail: 2 | Total: 290

nodistro
Pass: 9 | Fail: 0 | Total: 9

[github-actions]

Test run workflow

Test jobs for commit 46ea2ea

qcom-distro_linux-qcom-6.18
Pass: 231 | Fail: 0 | Total: 249

qcom-distro
Pass: 272 | Fail: 1 | Total: 296

nodistro
Pass: 9 | Fail: 0 | Total: 9

[sgaud-quic]

@lumag / @sbanerjeeqc / @vkraleti / @ricardosalveti could you please help review the PR..

[github-actions]

Test run workflow

Test jobs for commit 46ea2ea

qcom-distro_linux-qcom-6.18
Pass: 219 | Fail: 2 | Total: 247

qcom-distro
Pass: 271 | Fail: 2 | Total: 296

nodistro
Pass: 8 | Fail: 1 | Total: 9