Add Thermostat PI Heating/Cooling Demand Channels#764
Conversation
| </channel-type> | ||
|
|
||
| <!-- Thermostat Heating Demand --> | ||
| <channel-type id="thermostat_heatingdemand"> |
There was a problem hiding this comment.
Suggest to make this an advanced channel (so please add advanced="true".
| </channel-type> | ||
|
|
||
| <!-- Thermostat Cooling Demand --> | ||
| <channel-type id="thermostat_coolingdemand"> |
There was a problem hiding this comment.
Suggest to make this an advanced channel (so please add advanced="true".
| // Configure reporting | ||
| ZclAttribute attribute = serverCluster.getAttribute(ZclThermostatCluster.ATTR_PIHEATINGDEMAND); | ||
| CommandResult reportingResponse = attribute | ||
| .setReporting(REPORTING_PERIOD_DEFAULT_MIN, REPORTING_PERIOD_DEFAULT_MAX, 1).get(); |
There was a problem hiding this comment.
Please can you add reporting configuration here as well. See one of the converters like the OnOff switch which supports this with the ZclReportingConfig class.
| ZclAttribute attribute = serverCluster.getAttribute(ZclThermostatCluster.ATTR_PICOOLINGDEMAND); | ||
| CommandResult reportingResponse = attribute | ||
| .setReporting(REPORTING_PERIOD_DEFAULT_MIN, REPORTING_PERIOD_DEFAULT_MAX, 1).get(); | ||
| handleReportingResponse(reportingResponse, POLLING_PERIOD_DEFAULT, REPORTING_PERIOD_DEFAULT_MAX); |
There was a problem hiding this comment.
Please can you add reporting configuration here as well. See one of the converters like the OnOff switch which supports this with the ZclReportingConfig class. and the updateConfiguration method
lucasec
force-pushed
the
pi-heating-cooling-demand
branch
from
67b3e04 to
e7e7939
Compare
|
There seem to be a few surprises with the reporting config, trying to debug. |
This adds the "PI Heating Demand" and "PI Cooling Demand" standard thermostat channels. These channels are represented as a percentage (Dimensionless unit), and indicate whether there is a current heating or cooling call from the thermostat. They are fully supported by auto-discovery for the generic device type. Signed-off-by: Lucas Christian <lucas@lucasec.com>
lucasec
force-pushed
the
pi-heating-cooling-demand
branch
from
e7e7939 to
aa7a092
Compare
|
Disregard, it seems my zigbee stick got into some kind of loop and needed to be power cycled. Confirmed the reporting configuration is working as expected. Squashed commits to prepare for merge. |
|
Thanks. Looks good. |
This adds the "PI Heating Demand" and "PI Cooling Demand" standard thermostat channels. These channels are represented as a percentage (Dimensionless unit), and indicate whether there is a current heating or cooling call from the thermostat. They are fully supported by auto-discovery for the generic device type. Signed-off-by: Lucas Christian <lucas@lucasec.com>
2 participants
This adds the "PI Heating Demand" and "PI Cooling Demand" standard thermostat channels. These channels are represented as a percentage (Dimensionless unit), and indicate whether there is a current heating or cooling call from the thermostat. They are fully supported by auto-discovery for the generic device type.
My electric line voltage thermostats generally report 0% for no heat and 100% for full heating power. They also report values in between when they are limiting the current to the heater. I am not aware of how low voltage thermostats handle this spec, e.g. do they only report 0 and 100 or do they come up with some number in between even when they only electrically support "on" and "off".
I used
Number:Dimensionlessas this seems to be the generally accepted way to represent a percentage under the units of measurement system. I see some ongoing debate in #597 wrt. the relative humidity channel. If desired, I can submit a separate PR to update the humidity channel to the same type.