GitHub - jspaleta/SuperDARN_MSI_phasing: Tools for use in calibration and programming phasing matrix in the MSI radar design

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 1 Commit
AUTHORS		AUTHORS
COPYING		COPYING
Makefile		Makefile
README		README
_open_PLX9050.c		_open_PLX9050.c
_prog_conventions.c		_prog_conventions.c
_prog_conventions.h		_prog_conventions.h
atten_calibration.c		atten_calibration.c
atten_verifier.c		atten_verifier.c
attenuator_test.c		attenuator_test.c
beamcode_generator.c		beamcode_generator.c
check_programmed_beamcodes.c		check_programmed_beamcodes.c
check_radar_settings.c		check_radar_settings.c
dio_output_test.c		dio_output_test.c
main.c		main.c
reader.c		reader.c
registers.h		registers.h
rf_cal.c		rf_cal.c
select_beam.c		select_beam.c
select_final_beamcodes.c		select_final_beamcodes.c
summary_generator.c		summary_generator.c
time_compare.c		time_compare.c
time_delay.c		time_delay.c
utils.c		utils.c
verifier.c		verifier.c
verify_programmed_beamcodes.c		verify_programmed_beamcodes.c
write_final_beamcodes.c		write_final_beamcodes.c

Repository files navigation

Collection of programs to use for MSI phasing matrix calibration and programming.

Calibration routines depend on communication with an HP network analyzer.
Digital IO control assumes an ADLINK-PCI-DIO-120 card
VENDOR_ID 0x494f
DEVICE_ID 0x0c78

These programs are pretty rough and will require editting and re-compilation.
Contributions to make these more user friendly are more than welcome.