Feat/volume mount

Makefile

@@ -138,10 +138,13 @@ assign-to-ippool:
 	kubectl annotate namespace hobbit-service "cni.projectcalico.org/ipv4pools"='[“hobbit-service"]'
 
 start-platform:
-	kubectl apply -f ./resource/kompose
+	kubectl apply -k .
 
 start-dev-platform:
 	kubectl apply -f ./resource/kompose-dev
 
 start-elk-platform:
 	kubectl apply -f ./resource/kompose-elk
+
+start-redis-service:
+	kubectl apply -k .

config/db/virtuoso-ini

@@ -0,0 +1,260 @@
+;
+;  virtuoso.ini
+;
+;  Configuration file for the OpenLink Virtuoso VDBMS Server
+;
+;  To learn more about this product, or any other product in our
+;  portfolio, please check out our web site at:
+;
+;      http://virtuoso.openlinksw.com/
+;
+;  or contact us at:
+;
+;      general.information@openlinksw.com
+;
+;  If you have any technical questions, please contact our support
+;  staff at:
+;
+;      technical.support@openlinksw.com
+;
+
+;
+;  Database setup
+;
+[Database]
+DatabaseFile			= /opt/virtuoso-opensource/database/virtuoso.db
+ErrorLogFile			= /opt/virtuoso-opensource/database/virtuoso.log
+LockFile			= /opt/virtuoso-opensource/database/virtuoso.lck
+TransactionFile			= /opt/virtuoso-opensource/database/virtuoso.trx
+xa_persistent_file		= /opt/virtuoso-opensource/database/virtuoso.pxa
+ErrorLogLevel			= 7
+FileExtend			= 200
+MaxCheckpointRemap		= 2000
+Striping			= 0
+TempStorage			= TempDatabase
+
+
+[TempDatabase]
+DatabaseFile			= /opt/virtuoso-opensource/database/virtuoso-temp.db
+TransactionFile			= /opt/virtuoso-opensource/database/virtuoso-temp.trx
+MaxCheckpointRemap		= 2000
+Striping			= 0
+
+
+;
+;  Server parameters
+;
+[Parameters]
+ServerPort			= 1111
+LiteMode			= 0
+DisableUnixSocket		= 1
+DisableTcpSocket		= 0
+;SSLServerPort			= 2111
+;SSLCertificate			= cert.pem
+;SSLPrivateKey			= pk.pem
+;X509ClientVerify		= 0
+;X509ClientVerifyDepth		= 0
+;X509ClientVerifyCAFile		= ca.pem
+MaxClientConnections		= 10
+CheckpointInterval		= 60
+O_DIRECT			= 0
+CaseMode			= 2
+MaxStaticCursorRows		= 5000
+CheckpointAuditTrail		= 0
+AllowOSCalls			= 0
+SchedulerInterval		= 10
+DirsAllowed			= ., /opt/virtuoso-opensource/vad
+ThreadCleanupInterval		= 0
+ThreadThreshold			= 10
+ResourcesCleanupInterval	= 0
+FreeTextBatchSize		= 100000
+SingleCPU			= 0
+VADInstallDir			= /opt/virtuoso-opensource/vad/
+PrefixResultNames               = 0
+RdfFreeTextRulesSize		= 100
+IndexTreeMaps			= 256
+MaxMemPoolSize                  = 200000000
+PrefixResultNames               = 0
+MacSpotlight                    = 0
+IndexTreeMaps                   = 64
+MaxQueryMem 		 	= 2G		; memory allocated to query processor
+VectorSize 		 	= 1000		; initial parallel query vector (array of query operations) size
+MaxVectorSize 		 	= 1000000	; query vector size threshold.
+AdjustVectorSize 	 	= 0
+ThreadsPerQuery 	 	= 4
+AsyncQueueMaxThreads 	 	= 10
+;;
+;; When running with large data sets, one should configure the Virtuoso
+;; process to use between 2/3 to 3/5 of free system memory and to stripe
+;; storage on all available disks.
+;;
+;; Uncomment next two lines if there is 2 GB system memory free
+;NumberOfBuffers          = 170000
+;MaxDirtyBuffers          = 130000
+;; Uncomment next two lines if there is 4 GB system memory free
+;NumberOfBuffers          = 340000
+; MaxDirtyBuffers          = 250000
+;; Uncomment next two lines if there is 8 GB system memory free
+;NumberOfBuffers          = 680000
+;MaxDirtyBuffers          = 500000
+;; Uncomment next two lines if there is 16 GB system memory free
+;NumberOfBuffers          = 1360000
+;MaxDirtyBuffers          = 1000000
+;; Uncomment next two lines if there is 32 GB system memory free
+;NumberOfBuffers          = 2720000
+;MaxDirtyBuffers          = 2000000
+;; Uncomment next two lines if there is 48 GB system memory free
+;NumberOfBuffers          = 4000000
+;MaxDirtyBuffers          = 3000000
+;; Uncomment next two lines if there is 64 GB system memory free
+;NumberOfBuffers          = 5450000
+;MaxDirtyBuffers          = 4000000
+;;
+;; Note the default settings will take very little memory
+;; but will not result in very good performance
+;;
+NumberOfBuffers          = 10000
+MaxDirtyBuffers          = 6000
+
+
+[HTTPServer]
+ServerPort			= 8890
+ServerRoot			= /opt/virtuoso-opensource/vsp
+MaxClientConnections		= 10
+DavRoot				= DAV
+EnabledDavVSP			= 0
+HTTPProxyEnabled		= 0
+TempASPXDir			= 0
+DefaultMailServer		= localhost:25
+ServerThreads			= 10
+MaxKeepAlives			= 10
+KeepAliveTimeout		= 10
+MaxCachedProxyConnections	= 10
+ProxyConnectionCacheTimeout	= 15
+HTTPThreadSize			= 280000
+HttpPrintWarningsInOutput	= 0
+Charset				= UTF-8
+;HTTPLogFile		        = logs/http.log
+MaintenancePage             	= atomic.html
+EnabledGzipContent          	= 1
+
+
+[AutoRepair]
+BadParentLinks			= 0
+
+[Client]
+SQL_PREFETCH_ROWS		= 100
+SQL_PREFETCH_BYTES		= 16000
+SQL_QUERY_TIMEOUT		= 0
+SQL_TXN_TIMEOUT			= 0
+;SQL_NO_CHAR_C_ESCAPE		= 1
+;SQL_UTF8_EXECS			= 0
+;SQL_NO_SYSTEM_TABLES		= 0
+;SQL_BINARY_TIMESTAMP		= 1
+;SQL_ENCRYPTION_ON_PASSWORD	= -1
+
+[VDB]
+ArrayOptimization		= 0
+NumArrayParameters		= 10
+VDBDisconnectTimeout		= 1000
+KeepConnectionOnFixedThread	= 0
+
+[Replication]
+ServerName			= db-INSPIRO
+ServerEnable			= 1
+QueueMax			= 50000
+
+
+;
+;  Striping setup
+;
+;  These parameters have only effect when Striping is set to 1 in the
+;  [Database] section, in which case the DatabaseFile parameter is ignored.
+;
+;  With striping, the database is spawned across multiple segments
+;  where each segment can have multiple stripes.
+;
+;  Format of the lines below:
+;    Segment<number> = <size>, <stripe file name> [, <stripe file name> .. ]
+;
+;  <number> must be ordered from 1 up.
+;
+;  The <size> is the total size of the segment which is equally divided
+;  across all stripes forming  the segment. Its specification can be in
+;  gigabytes (g), megabytes (m), kilobytes (k) or in database blocks
+;  (b, the default)
+;
+;  Note that the segment size must be a multiple of the database page size
+;  which is currently 8k. Also, the segment size must be divisible by the
+;  number of stripe files forming  the segment.
+;
+;  The example below creates a 200 meg database striped on two segments
+;  with two stripes of 50 meg and one of 100 meg.
+;
+;  You can always add more segments to the configuration, but once
+;  added, do not change the setup.
+;
+[Striping]
+Segment1			= 100M, db-seg1-1.db, db-seg1-2.db
+Segment2			= 100M, db-seg2-1.db
+;...
+
+;[TempStriping]
+;Segment1			= 100M, db-seg1-1.db, db-seg1-2.db
+;Segment2			= 100M, db-seg2-1.db
+;...
+
+;[Ucms]
+;UcmPath			= <path>
+;Ucm1				= <file>
+;Ucm2				= <file>
+;...
+
+
+[Zero Config]
+ServerName			= virtuoso (INSPIRO)
+;ServerDSN			= ZDSN
+;SSLServerName			=
+;SSLServerDSN			=
+
+
+[Mono]
+;MONO_TRACE			= Off
+;MONO_PATH			= <path_here>
+;MONO_ROOT			= <path_here>
+;MONO_CFG_DIR			= <path_here>
+;virtclr.dll			=
+
+
+[URIQA]
+DynamicLocal			= 0
+DefaultHost			= localhost:8890
+
+
+[SPARQL]
+;ExternalQuerySource		= 1
+;ExternalXsltSource 		= 1
+;DefaultGraph      		= http://localhost:8890/dataspace
+;ImmutableGraphs    		= http://localhost:8890/dataspace
+ResultSetMaxRows           	= 10000
+MaxQueryCostEstimationTime 	= 400	; in seconds
+MaxQueryExecutionTime      	= 60	; in seconds
+DefaultQuery               	= select distinct ?Concept where {[] a ?Concept} LIMIT 100
+DeferInferenceRulesInit    	= 0  ; controls inference rules loading
+;PingService       		= http://rpc.pingthesemanticweb.com/
+
+
+[Plugins]
+LoadPath			= /opt/virtuoso-opensource/hosting
+;Load1				= plain, wikiv
+;Load2				= plain, mediawiki
+;Load3				= plain, creolewiki
+;Load4			= plain, im
+;Load5		= plain, wbxml2
+;Load6			= plain, hslookup
+;Load7			= attach, libphp5.so
+;Load8			= Hosting, hosting_php.so
+;Load9			= Hosting,hosting_perl.so
+;Load10		= Hosting,hosting_python.so
+;Load11		= Hosting,hosting_ruby.so
+;Load12				= msdtc,msdtc_sample

config/redis-db/.gitignore

@@ -3,3 +3,4 @@
 # Except this file
 !.gitignore
 !redis.conf
+!redis-conf

config/redis-db/redis-conf

@@ -0,0 +1,5 @@
+appendonly yes
+appendfsync always
+save 60 100
+save 360 10
+save 3600 1

kustomization.yaml

@@ -0,0 +1,12 @@
+configMapGenerator:
+- name: redis-server
+  files:
+    - config/redis-db/redis-config
+- name: vos-server
+  files:
+    - config/db/virtuoso-ini
+resources:
+- resource/redis.yaml
+- resource/vos.yaml
+- resource/keycloak.yaml
+- resource/rabbit.yaml

resource/calico.yaml

@@ -3746,5 +3746,3 @@ metadata:
 
 ---
 # Source: calico/templates/configure-canal.yaml
-
-

resource/hobbit-core-networkpolicy.yaml

@@ -0,0 +1,23 @@
+apiVersion: networking.k8s.io/v1
+kind: NetworkPolicy
+metadata:
+  creationTimestamp: null
+  name: hobbit-core
+spec:
+  policyTypes:
+  - Ingress
+  - Egress
+  ingress:
+  - from:
+    - podSelector:
+        matchLabels:
+          io.kompose.network/hobbit-core: hobbit-core
+  egress:
+    - to:
+        - podSelector:
+            matchLabels:
+              io.kompose.network/hobbit-core: hobbit-core
+  podSelector:
+    matchLabels:
+      io.kompose.network/hobbit-core: hobbit-core
+

resource/hobbit-networkpolicy.yaml

@@ -0,0 +1,22 @@
+apiVersion: networking.k8s.io/v1
+kind: NetworkPolicy
+metadata:
+  creationTimestamp: null
+  name: hobbit
+spec:
+  policyTypes:
+  - Ingress
+  - Egress
+  ingress:
+  - from:
+    - podSelector:
+        matchLabels:
+          io.kompose.network/hobbit: hobbit
+  egress:
+    - to:
+        - podSelector:
+            matchLabels:
+              io.kompose.network/hobbit: hobbit
+  podSelector:
+    matchLabels:
+      io.kompose.network/hobbit: hobbit

resource/kompose/keycloak.yaml → resource/keycloak.yaml

@@ -4,6 +4,7 @@ metadata:
   name: keycloak
   labels:
     app: keycloak
+    io.kompose.network/hobbit: "true"
   annotations:
     "cni.projectcalico.org/ipv4pools": "[\"hobbit\"]"
 spec:
@@ -15,6 +16,7 @@ spec:
     metadata:
       labels:
         app: keycloak
+        io.kompose.network/hobbit: "true"
       annotations:
         "cni.projectcalico.org/ipv4pools": "[\"hobbit\"]"
     spec: