The Gevako RS6 is an industrial-grade 6-channel Smart Relay board designed for Home Assistant via ESPHome. Powered by the ESP32-C6 RISC-V processor, it provides rock-solid local control using either WiFi 6 or the Thread protocol.
It features six fully independent relays, each capable of switching up to 16 A at 250 VAC / 30 VDC.
🔗 Hardware Details & Store:
| GPIO Pin | Function |
|---|---|
GPIO00 |
Relay Output 1 |
GPIO01 |
Relay Output 2 |
GPIO02 |
Relay Output 3 |
GPIO03 |
Relay Output 4 |
GPIO04 |
Relay Output 5 |
GPIO05 |
Relay Output 6 |
GPIO08 |
Status LED (Green) |
GPIO09 |
BOOT Button |
GPIO14 |
Power source detection |
| Terminal | Label | Description |
|---|---|---|
| 1 | L1 | Power source input 1. Max 250 VAC / 30 VDC 16 A. |
| 2 | O1 | Switched output 1. Max 250 VAC / 30 VDC 16 A. |
| 3 | L2 | Power source input 2. Max 250 VAC / 30 VDC 16 A. |
| 4 | O2 | Switched output 2. Max 250 VAC / 30 VDC 16 A. |
| 5 | L3 | Power source input 3. Max 250 VAC / 30 VDC 16 A. |
| 6 | O3 | Switched output 3. Max 250 VAC / 30 VDC 16 A. |
| 7 | L4 | Power source input 4. Max 250 VAC / 30 VDC 16 A. |
| 8 | O4 | Switched output 4. Max 250 VAC / 30 VDC 16 A. |
| 9 | L5 | Power source input 5. Max 250 VAC / 30 VDC 16 A. |
| 10 | O5 | Switched output 5. Max 250 VAC / 30 VDC 16 A. |
| 11 | L6 | Power source input 6. Max 250 VAC / 30 VDC 16 A. |
| 12 | O6 | Switched output 6. Max 250 VAC / 30 VDC 16 A. |
| 13 | L | Board Power: Phase 230 VAC. |
| 14 | N | Board Power: Null 230 VAC. |
| 22 | B | BOOT / Reboot (2 s) / Factory reset (10 s) |
| 23-24 | USB | USB-C connector. Max 5 VDC (1 A) for provisioning. |
The RS6 is fully compatible with ESPHome and can be provisioned using standard WiFi or integrated directly into a Thread network using USB TLV code provisioning.
- WiFi / Thread ESPHome Installer: gevako.com/esphome
- Thread Provisioning Tool: gevako.com/thread
- Official ESPHome Web: web.esphome.io