Tank Controller Library

Arduino library for the Open Acidification pH Stat Controller

Use

Clone (or fork and clone if you might contribute to the project) this repository to the Arduino Libraries directory.
Use scripts/install.sh to do the initial install.
After that use scripts/testAndBuild.sh to test.
To build the GUI simulator, see GUI/build.sh.

To install onto an Arduino Mega2560 use the Arduino IDE.

To navigate through the menus, press 2, 4, 6, or 8 on the keypad.

The following are "hidden" commands:

From the 'SeeDeviceAddress' command:
- 'B' goes into an infinite loop that should trigger a reset by the watchdog timer in 8 seconds
- 'C' regenerates a new (random) MAC address that will take effect on the next restart
On startup you can avoid the 60-second DHCP attempt by pressing any key

Thanks goes to these wonderful people (emoji key):