This repository was archived by the owner on Dec 9, 2025. It is now read-only.
-
Notifications
You must be signed in to change notification settings - Fork 25
Config Guide
bora edited this page Jun 27, 2024
·
3 revisions
Below is a full guide to each and every section of the config. Originally featured in the config.txt itself, but moved here so that the config.txt isn't so crowded.
-
AIM_KEY:
Shift- Change to any key in the keybinds list (check
keybind_list.txt).
- Change to any key in the keybinds list (check
-
SWITCH_MODE_KEY:
F5(set todisabledto turn off)- Change between toggling and holding with the
AIM_KEY. By default, pressingAIM_KEYtoggles the aimbot on and off. If you pressF5, it'll only be active when holding it.
- Change between toggling and holding with the
-
UPDATE_KEY:
F6(set todisabledto turn off)
-
FOV_KEY_UP:
ctrl+](set todisabledto turn off) -
FOV_KEY_DOWN:
ctrl+[(set todisabledto turn off) -
CAM_FOV:
95 -
AIM_FOV:
70- Don't make
AIM_FOVbigger thanCAM_FOV. Keep theCAM_FOVfairly large;AIM_FOVis the only one that controls how blatant it is.
- Don't make
-
AIM_SPEED_X:
0.4 -
AIM_SPEED_Y:
0.4- High speeds can cause stuttering and shaking, so don't go too high.
-
SMOOTHENING:
enabled/disabled -
SMOOTH_FACTOR:
1- Makes plays look more legit. Credits to AndrewDarkYY for making the original method.
-
AIM_OFFSET_X:
7 -
AIM_OFFSET_Y:
10- If it aims too far to the left, decrease the X offset. If it's too far to the right, increase it.
- If it aims too high up, increase the Y offset. If it aims too far down (doesn't hit headshots), decrease the Y offset.
-
TRIGGERBOT:
enabled/disabled -
TRIGGERBOT_DELAY:
0 -
TRIGGERBOT_DISTANCE:
10- Automatically shoots. To disable, change
TRIGGERBOTtodisabled. - Delay before shooting to look legit. 80 - 100 is recommended.
-
TRIGGERBOT_DISTANCEis how close it needs to be to auto shoot. You probably don't have to change it.
- Automatically shoots. To disable, change
-
COLOR: (put a color here)
- Set the color of enemies to aim at. Options: Yellow, Blue, Pink/Magenta/Purple, Green, Cyan, Red, Black, or Aimblox (for Arcade and Competitive only).
- If you're playing Bad Business, use
0000ffwith outline transparency set to0. - Note: Black is not recommended as it will aim at random things, and Red is also not recommended for Arsenal.
-
UPPER_COLOR:
0, 0, 0 -
LOWER_COLOR:
0, 0, 0- These are the color values for black, so you need to change them according to the guide linked above.
- Make a custom color using: Custom Color Guide. Remember to change
COLORtocustom.
-
HIDE_CONSOLE:
enabled/disabled- Hides the menu entirely. Note that you won't be able to tell if the colorbot is on or not and will have to use Task Manager to close it.
-
SHOW_FOV:
enabled/disabled- Creates an overlay, a circle that represents the size of your FOV
-
CAM_FOV_COLOR:
0-255, 0-255, 0-255- Color of the Cam FOV circle. RGB, not HSV like the custom color.
-
AIM_FOV_COLOR:
0-255, 0-255, 0-255- Color of the Aim FOV circle. RGB, not HSV like the custom color.
Face any issues? Check the troubleshooting steps. If all else fails, ask in the Issues tab or the Discord.