Using the GUI

Login Screen

When you launch the GUI, this screen will appear. You can log in with your Panthera credentials to upload results to Panthera. To bypass Panthera log in, you can enter the username

local for non-expert mode

localexpert for expert mode

with no password.

Non-Expert Mode

After logging in you will see status indicators for the database, HV, LV, FC7, Temp/Humidity. If you are running locally, then the database indicator will be red. If anything else is red you can click the "Refresh" button to attempt to reconnect all the devices. If you are ready to test a module you should:

1. Either manually (on a keyboard) enter an module id into the "Serial Number" box and press "enter" on the keyboard or scan a QR code with your scanner (if you have one).
2. (Optional) Choose "Quick Test" if you don't want to run the full suite of tests.
3. Click the green "Go" button to start tests and open Test Window.

Expert Mode

Home

1. Select fc7's
2. Ensure Arduino information is correct and click "Use" on the selected Arduino
3. Click "Connect all devices"
4. Click "New" to start a new test

Test Selection Window

After clicking "New" on the expert home screen, the test selection window will appear. Here is a hardware labeling diagram.

1. Select a test or test sequence
2. Enter module names and specifications
3. Click "Next"

Test Window

1. Click "Run" to run tests
2. Click "Upload Results" to upload test results to Panthera