Add QC UEFI log support

.gitignore

@@ -5,3 +5,4 @@ dist/
 .DS_Store
 Thumbs.db
 npm-debug.log*
+/.vs

highlight/QC_UEFI.json

@@ -0,0 +1,85 @@
+{
+  "_comment": "QC UEFI (Patina) log highlight rules. Edit this file to add/adjust highlighting. Each rule: name, level (error|warn|info|version|hwinfo, or a custom level), pattern (JavaScript regex source, case-insensitive). Whole-line tint follows the highest level matched on that line.",
+  "rules": [
+    {
+      "name": "error",
+      "level": "error",
+      "pattern": "\\b(?:error|err|fail(?:ed|ure)?|fatal|panic|exception|assert(?:ion)?|abort(?:ed)?|halt|hang|bugcheck|unexpected|invalid|corrupt(?:ed)?)\\b"
+    },
+    {
+      "name": "warning",
+      "level": "warn",
+      "pattern": "\\b(?:warn(?:ing)?|timeout|timed?\\s*out|retry|retries|retrying|skip(?:ped)?|deprecated)\\b"
+    },
+    {
+      "name": "i2c-transfer-failed",
+      "level": "error",
+      "pattern": "iStatus\\s*=\\s*0x[0-9a-f]+"
+    },
+    {
+      "name": "fru",
+      "level": "fru",
+      "pattern": "TDM\\s+Replacement\\s+Mode\\s+(?:not\\s+)?requested|New\\s+Display\\s+Module\\s+detected|Unlocking\\s+Cal\\s+data\\s+storage|SerialNumUpdateRequested\\s*:\\s*\\d|Motherboard\\s+Serial\\s+Number\\s*:"
+    },
+    {
+      "name": "version",
+      "level": "version",
+      "pattern": "(?:Bootchain\\s+version|SAM\\s+version|UEFI\\s+Runtime\\s+Mode|Commit\\s+Hash)\\s*:.*"
+    },
+    {
+      "name": "patina-version",
+      "level": "version",
+      "pattern": "Starting\\s+Patina\\s+with\\s+\\S+\\s+[\\d.]+"
+    },
+    {
+      "name": "soc-serial-number",
+      "level": "socsn",
+      "pattern": "Serial\\s+Number\\s*@\\s*0x[0-9A-Fa-f]+\\s*=\\s*0x[0-9A-Fa-f]+"
+    },
+    {
+      "name": "hwinfo",
+      "level": "hwinfo",
+      "pattern": "(?:Program\\s+ID|SKU\\s+ID|Memory\\s+ID|Build\\s+ID|SoC\\s+Version|SoC\\s+Cores|SoC\\s+Fuse|Tdm\\s+Board\\s+ID|Storage\\s+Type)\\s*:.*"
+    },
+    {
+      "name": "spinor-vendor-id",
+      "level": "hwinfo",
+      "pattern": "Spinor\\(9F\\)\\s*:.*"
+    },
+    {
+      "name": "nvram-dump",
+      "level": "nvram",
+      "pattern": "\\[DebugDumpAllUefiVariables\\].*|(?:NV|BS|RT)[+A-Z]*\\s+'[^']+'\\s+DataSize\\s*=\\s*0x[0-9A-Fa-f]+"
+    },
+    {
+      "name": "nvram-varlist",
+      "level": "nvram",
+      "pattern": "==== TestPointDumpVariable.*|Variable List:|Name=L\"[^\"]*\"\\s+Guid=.*Attr=.*"
+    },
+    {
+      "name": "gpio-config",
+      "level": "gpio",
+      "pattern": "\\[ConfigAndSetGpios\\].*|GPIO_\\d+\\s+FUNCTION:.*"
+    },
+    {
+      "name": "gpio-platconf",
+      "level": "gpio",
+      "pattern": "\\[PlatConfSocGpioPrint\\].*|\\[GPIO No\\.\\s*\\d+\\].*"
+    },
+    {
+      "name": "uefi-perf",
+      "level": "perf",
+      "pattern": "FirmwareBootPerformanceDxe::.*measurements\\s*:.*|->\\s*\\S.*=\\s*\\d+\\s*ms\\b|Total\\s+\\S.*=\\s*\\d+\\s*ms\\b"
+    },
+    {
+      "name": "boot-milestone",
+      "level": "boot",
+      "pattern": "UEFI\\s+(?:Start|End)\\s+\\[\\s*\\d+\\s*\\]|EBS\\s+completed\\s+successfully"
+    },
+    {
+      "name": "membucket-header",
+      "level": "membucket",
+      "pattern": "Memory\\s+Previous\\s+Current\\s+Minimum\\s+Next"
+    }
+  ]
+}

src/renderer/i18n/en.json

@@ -113,6 +113,12 @@
   "ana.intr": "Interrupt",
   "ana.uefissh": "UEFI_SSH",
   "ana.pd": "PD",
+  "ana.hwinfo": "Hardware Info",
+  "ana.fru": "FRU",
+  "ana.socsn2": "SOC SN",
+  "ana.nvram": "NVRAM",
+  "ana.gpio": "GPIO",
+  "ana.perf": "UEFI Perf",
   "ana.level.toggle": "Select: include in count / up-down navigation",
   "ana.level.jump": "Jump to next (Shift+click: previous)",
   "ana.find.ph": "Search…",

src/renderer/i18n/zh.json

@@ -113,6 +113,12 @@
   "ana.intr": "中斷",
   "ana.uefissh": "UEFI_SSH",
   "ana.pd": "PD",
+  "ana.hwinfo": "硬體資訊",
+  "ana.fru": "FRU",
+  "ana.socsn2": "SOC SN",
+  "ana.nvram": "NVRAM",
+  "ana.gpio": "GPIO",
+  "ana.perf": "UEFI 效能",
   "ana.level.toggle": "選取：是否納入計數與上下導覽",
   "ana.level.jump": "跳到下一個（Shift+點擊：上一個）",
   "ana.find.ph": "搜尋…",

src/renderer/js/app.js

@@ -1650,7 +1650,7 @@ async function anaPopulateHl() {
   sel.value = ana.hl || 'auto';
 }
 
-const ANA_RANK = { info: 1, intr: 1.5, warn: 2, error: 3 };
+const ANA_RANK = { info: 1, hwinfo: 1, fru: 1, socsn: 1, nvram: 1, gpio: 1, perf: 1, intr: 1.5, warn: 2, error: 3 };
 
 function anaHighlightLine(line, rules) {
   // Match against the RAW text (not HTML-escaped) so patterns can use real
@@ -2287,6 +2287,12 @@ function anaLevelLabel(level) {
   if (level === 'intr') return t('ana.intr', '中斷');
   if (level === 'uefissh') return t('ana.uefissh', 'UEFI_SSH');
   if (level === 'pd') return t('ana.pd', 'PD');
+  if (level === 'hwinfo') return t('ana.hwinfo', '硬體資訊');
+  if (level === 'fru') return t('ana.fru', 'FRU');
+  if (level === 'socsn') return t('ana.socsn2', 'SOC SN');
+  if (level === 'nvram') return t('ana.nvram', 'NVRAM');
+  if (level === 'gpio') return t('ana.gpio', 'GPIO');
+  if (level === 'perf') return t('ana.perf', 'UEFI Perf');
   if (anaIsMarkLevel(level)) return anaMarkLabel(level);
   return String(level || '').toUpperCase();
 }