This is my first approach to Git and project sharing.
This work for me!
Based on first Sharebot NG firmware https://github.com/Sharebot3D/Marlin
The original PSU was dead, I've changed it with a FTX PSU (from a dead 1U server ) I've implemented the PSU_CONTROL
I've added a filament runout sensor.
I'm trying to add a bltouch sensor. (may the sensor will be with me....)
Config NG Sharebot 1 estruder. erial Speed rised from 115200 to 250k (Octoprint) - 500k (Pc connection) Some hw changed made (FTX PSU -NB - endstop X and Y reverted to original (Sharebot standard) Photo Giaupau gioloky MauroB
Some news on https://www.stampa3d-forum.it/forum/forum/124-sharebot/
00-01
- S_CURVE_ACCELERATION
- PSU_CONTROL // Printer shutdown +12V after print (ATX-FTX PSU needed!)
- HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
- BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
03
- NOZZLE_PARK_FEATURE
- NO_MOTION_BEFORE_HOMING
- UNKNOWN_Z_NO_RAISE
04
- MESH_BED_LEVELING
- G26_MESH_VALIDATION
- LEVEL_BED_CORNERS
04-02
- FILAMENT_RUNOUT_SENSOR
- FIL_RUNOUT_PIN 32
- FIL_RUNOUT_INVERTING true (instead false)
- POWER_TIMEOUT from 30 to 300
Config ADV 00-01
- ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
- WATCH_TEMP_PERIOD 80 // (To be reduced!)
- WATCH_TEMP_INCREASE 4 // (To be reduced!)
- FAN_MAX_PWM
- FAN_MIN_PWM
- E0_AUTO_FAN_PIN 8 //I use FAN pin 8 to cool down the ESTRUDER MOTOR!!
03
- HOST_ACTION_COMMANDS
- HOST_PROMPT_SUPPORT
- ADVANCED_PAUSE_FEATURE
- HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
Removed since now Original sharebot leveling Original Sharebot filament change