nvidia-xrun

These utility scripts aim to make the life easier for nvidia cards users. It started with a revelation that bumblebee in current state offers very poor performance. This solution offers a bit more complicated procedure but offers a full GPU utilization(in terms of linux drivers)

Usage:

1. switch to free tty
2. login
3. run nvidia-xrun [app]
4. enjoy

Passwordless sudo

Whitelisting nvidia-toggle in your sudoer's file allows you to use nvidia-xrun without entering your password:

%users ALL=(root) NOPASSWD:/usr/bin/nvidia-toggle

...where /usr/bin/nvidia-toggle is the full path to the nvidia-toggle script.

Note: it is a good practice to ensure binaries/scripts/etc. that are whitelisted for passwordless sudo are owned by root.

Structure

• nvidia-xrun - uses following dir structure:
• /usr/bin/nvidia-xrun - the executable script
• /etc/X11/nvidia-xorg.conf - the main X confing file
• /etc/X11/xinit/nvidia-xinitrc - xinitrc config file. Contains the setting of provider output source
• /etc/X11/xinit/nvidia-xinitrc.d - custom xinitrc scripts directory
• /etc/X11/nvidia-xorg.conf.d - custom X config directory
• /usr/share/xsessions/nvidia-xrun-openbox.desktop - xsession file for openbox
• /usr/share/xsessions/nvidia-xrun-plasma.desktop - xsession file for plasma
• [OPTIONAL] ~/.nvidia-xinitrc - user-level custom xinit script file. You can put here your favourite window manager for example

Setting the right bus id

Usually the 1:0:0 bus is correct. If this is not your case(you can find out through lspci or bbswitch output mesages) you can create a conf script for example nano /etc/X11/nvidia-xorg.conf.d/30-nvidia.conf to set the proper bus id:

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:2:0:0"
EndSection

You can use this command to get the bus id:

lspci | grep -i nvidia | awk '{print $1}'

Also this way you can adjust some nvidia settings if you encounter issues:

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    #  Option "AllowEmptyInitialConfiguration" "Yes"
    #  Option "UseDisplayDevice" "none"
EndSection

Automatically run window manager

For convenience you can create nano ~/.nvidia-xinitrc and put there your favourite window manager:

if [ $# -gt 0 ]; then
    $*
else
    openbox-session
#   startkde
fi

With this you do not need to specify the app and you can simply run:

nvidia-xrun

Aur package

The aur package can be found here: https://aur.archlinux.org/packages/nvidia-xrun/

COPR Repo for Fedora 27+

To Install from COPR

• dnf copr enable axeld/nvidia-xrun
• dnf install nvidia-xrun

OBS Repo for OpenSUSE, Fedora 27+ and RHEL7

The OBS Repo can be found here

Troubleshooting

Steam issues

Yes unfortunately running Steam directly with nvidia-xrun does not work well - I recommend to use some window manager like openbox.

HiDPI issue

When using openbox on a HiDPI (i.e. 4k) display, everything could be so small that is difficult to read. To fix, you can change the DPI settings in ~/.Xresources (~/.Xdefaults) file by adding/changing Xft.dpi setting. For example :

Xft.dpi: 192

nouveau driver conflict

nouveau driver should be automatically blacklisted by nvidia but in case it is not, nvidia might not get access to GPU. Then you need to manually blacklist nouveau following Arch wiki https://wiki.archlinux.org/index.php/kernel_modules#Blacklisting.

avoid nvidia driver to load on boot

nvidia driver may load itself on boot, then nvidia-xrun will fail to start Xorg session. To avoid that, you should blacklist it (see link above). Also sometimes, blacklisting is not enough and you should use some hack to really avoid it to load. For example, adding install nvidia /bin/false to /etc/modprobe.d/nvidia.conf will make every load to fail. In that case, you should add --ignore-install to modprobe calls in nvidia-xrun script.

Vulkan does not work

Check https://wiki.archlinux.org/index.php/Vulkan

• remove package vulkan-intel
• set VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/nvidia_icd.json