Dropdown boxes for pin selection are now numeric boxes

[KrX3D]

What happened?

hello,

in the newest versions the dropdown boxes for i.e. SDA/SCL etc, so all dropdowns where pins could be selected are now numeric boxes:

before:

now:

To Reproduce Bug

install newest 0.16 build

Expected Behavior

should be dropdown boxes again since it offered only the available pins and also shows already used pins

Install Method

Self-Compiled

What version of WLED?

0.16

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[DedeHai]

does #5013 fix it?

[KrX3D]

ok i found it. as soon as i use the usermod i created here: #4237

the scl/sda are changed from the dropdown to the numeric input, so something was changed in wled and i need to fix that in the usermod.

but i saw that the the LED output pin selection it in fact is still a numeric box (also is in my older wled installations) so it would be nice if this awould also change with the dropdown which would be more user friendly. all other options like relay, buttons etc are already dropdown menus

EDIT: so far i could test it its the appendConfigData() part in the usermod

[DedeHai]

LED output as dropdown is already done by @blazoncek its just a question of bringing it upstream which will happen eventually.
So can this be closed?

[KrX3D]

Hi, yes it can probably be closed.

Still odd that this happend since some changes in the last 2/3 months.

And odd that the problem is that something like:

	//INA226
	oappend("dda=addDropdown('INA2xx','average');");
	oappend("addOption(dda,'1 (default)',0, true);");
	oappend("addOption(dda,'4',512);");
	oappend("addOption(dda,'16',1024);");
	oappend("addOption(dda,'64',1536);");
	oappend("addOption(dda,'128',2048);");
	oappend("addOption(dda,'256',2560);");
	oappend("addOption(dda,'512',3072);");
	oappend("addOption(dda,'1024',3584);");

in the appendConfigData broke it, because it wasnt used since i used an INA219, so it couldnt find the average dropddown (which is only there for the ina226) and that "broke" it

EDIT: i had localy an older verion of the usermod, the version in the PR had already the part fixed

[DedeHai]

incorrect code on an embedded system is always problematic as it is not error proof and will just stop working.
Only one thing changed in recent time (and I already have a better solution, see my first comment) 529edfc