FFCONFIG_TEST.TXT

#************************************************
# ff_sys_config.ini
# Fodder Factory Monitoring and Control
#
# (c) Brendan McLearie - bmclearie@mclearie.com
#
# System configuration settings as an ini file:
# 	System configuration
# 	Input configs
# 	Monitor Configs
#	Rules
#	Controller configs
# 	Output configs
#************************************************/


#************************************************
# System
#************************************************/
[system]
type = SYS_SYSTEM
display_name = System
description = Reserved System Block
language = English
temp_scale = Celsius
#temp_scale = Fahrenheit
week_start = SUN
		
#************************************************
# Inputs
#************************************************/
[inputs]
input1 = IN_INSIDE_TOP_TEMP
input2 = IN_OUTSIDE_TEMP
input3 = IN_WATER_TEMP
input4 = IN_INSIDE_BOTTOM_TEMP
input5 = IN_LOADING_DOOR_SWITCH
input6 = IN_HARVEST_DOOR_SWITCH 
#input7 =  

[IN_INSIDE_TOP_TEMP]
type = IN_ONEWIRE
display_name = Inside Top
description = Dallas sensor inside the top of the fodder factory
interface = ONEWIRE
if_num = 1
log_rate = 00:01:00
data_units = Celsius
data_type = float

[IN_OUTSIDE_TEMP]
type = IN_ONEWIRE
display_name = Outside
description = Dallas sensor for outside air temprature
interface = ONEWIRE
if_num = 0
log_rate = 00:01:00
data_units = Celsius
data_type = float

[IN_WATER_TEMP]
type = IN_ONEWIRE
display_name = Water
description = Dallas sensor in the header tank
interface = ONEWIRE
if_num = 2
log_rate = 00:01:00
data_units = Celsius
data_type = float

[IN_INSIDE_BOTTOM_TEMP]
type = IN_ONEWIRE
display_name = Inside Bot
description = Dallas sensor inside the bottom of the fodder factory
interface = ONEWIRE
if_num = 3
log_rate = 00:01:00
data_units = Celsius
data_type = float

[IN_LOADING_DOOR_SWITCH]
type = IN_DIGITAL
display_name = Loading Door
description = Reed switch on loading end door
interface = DIG_PIN_IN
# update with real pins and remove log_rate 
if_num =             
log_rate = 00:01:10
data_units = ONOFF
data_type = int

[IN_HARVEST_DOOR_SWITCH]
type = IN_DIGITAL
display_name = Harvest Door
description = Reed switch on harvest end door
interface = DIG_PIN_IN
# update with real pins and remove log_rate 
if_num =            
log_rate = 00:03:10
data_units = ONOFF
data_type = int

#************************************************
# Monitors
#************************************************/
[monitors]
monitor1 = MON_INSIDE_TOP_TOO_COLD
monitor2 = MON_INSIDE_TOP_TOO_HOT
monitor3 = MON_INSIDE_BOTTOM_TOO_COLD
monitor4 = MON_INSIDE_BOTTOM_TOO_HOT
monitor5 = MON_WATER_TOO_HOT
monitor6 = MON_WATER_TOO_COLD
monitor7 = MON_OUTSIDE_HOT
monitor8 = MON_OUTSIDE_COLD
monitor9 = MON_INSIDE_AVERAGE_TOO_COLD
monitor10 = MON_INSIDE_AVERAGE_TOO_HOT
monitor11 = MON_LOAD_DOOR_OPEN 
monitor12 = MON_HARVEST_DOOR_OPEN
#monitor13 = 


[MON_INSIDE_TOP_TOO_COLD]
type = MON_CONDITION_LOW
display_name = Inside Top Too Cold
description =  
input1 = IN_INSIDE_TOP_TEMP
act_val	= 21.00
deact_val = 23.00

[MON_INSIDE_TOP_TOO_HOT]
type = MON_CONDITION_HIGH
display_name = Inside Top Too Hot
description = 
input1 = IN_INSIDE_TOP_TEMP
act_val	= 23.00
deact_val = 21.00

[MON_INSIDE_BOTTOM_TOO_COLD]
type = MON_CONDITION_LOW
display_name = Inside Bottom Too Cold
description =  
input1 = IN_INSIDE_BOTTOM_TEMP
act_val	= 21.00
deact_val = 23.00

[MON_INSIDE_BOTTOM_TOO_HOT]
type = MON_CONDITION_HIGH
display_name = Inside Bottom Too Hot
description = 
input1 = IN_INSIDE_BOTTOM_TEMP
act_val	= 23.00
deact_val = 21.00

[MON_INSIDE_AVERAGE_TOO_COLD]
type = MON_AVERAGE_CONDITION_LOW
display_name = Average Inside Too Cold
description =  
input1 = IN_INSIDE_BOTTOM_TEMP
input2 = IN_INSIDE_TOP_TEMP
act_val	= 21.00
deact_val = 23.00

[MON_INSIDE_AVERAGE_TOO_HOT]
type = MON_AVERAGE_CONDITION_HIGH
display_name = Average Inside Too Hot
description =  
input1 = IN_INSIDE_BOTTOM_TEMP
input2 = IN_INSIDE_TOP_TEMP
act_val	= 23.00
deact_val = 21.00

[MON_WATER_TOO_HOT]
type = MON_CONDITION_HIGH
display_name = Water too hot
description = Water Inside the Header tank is too hot
input1 = IN_WATER_TEMP
act_val	= 23.00
deact_val = 21.00

[MON_WATER_TOO_COLD]
type = MON_CONDITION_LOW
display_name = Water too cold
description = 
input1 = IN_WATER_TEMP
act_val	= 21.00
deact_val = 23.00

[MON_OUTSIDE_HOT]
type = MON_CONDITION_HIGH
display_name = Outside Hot
description = Outside Temprature Above Set Point
input1 = IN_OUTSIDE_TEMP
act_val	= 23.00
deact_val = 21.00

[MON_OUTSIDE_COLD]
type = MON_CONDITION_LOW
display_name = Outside Cold
description = Outside Temprature Below Set Point
input1 = IN_OUTSIDE_TEMP
act_val	= 21.00
deact_val = 23.00

[MON_LOAD_DOOR_OPEN]
type = MON_TRIGGER
display_name = Loading End Door Open
description =  
input1 = IN_LOADING_DOOR_SWITCH
act_val	= HIGH
deact_val = LOW

[MON_HARVEST_DOOR_OPEN]
type = MON_TRIGGER
display_name = Harvest End Door Open
description =  
input1 = IN_HARVEST_DOOR_SWITCH
act_val	= HIGH
deact_val = LOW

#************************************************
# Schedules
#************************************************/
[schedules]
schedule1 = SCH_EXCLUDE_WATER_HEAT_BY_DAY
schedule2 = SCH_RUN_LIGHTS_AT_NIGHT
schedule3 = SCH_RESET_MIN_MAX_COUNTERS
schedule4 = SCH_WATERING_TOP_SCHEDULE
schedule5 = SCH_WATERING_BOTTOM_SCHEDULE
schedule6 = SCH_TEST1
schedule7 = SCH_TEST2
schedule8 = SCH_TEST3
schedule9 = SCH_TEST4
schedule10 = SCH_TEST5
schedule11 = SCH_TEST6

[SCH_TEST1]
type = SCH_START_STOP
display_name = Test 1
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = ALL
time_start = 19:30:00
time_end = 19:45:00

[SCH_TEST2]
type = SCH_START_STOP
display_name = Test 2
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = SUN
time_start = 19:31:00
time_end = 9:30:00

[SCH_TEST3]
type = SCH_START_STOP
display_name = Test 3
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = SAT
time_start = 23:00:00
time_end = 19:43:00

[SCH_TEST4]
type = SCH_START_STOP
display_name = Test 4
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = SAT
time_start = 10:30:00
time_end = 19:34:00

[SCH_TEST5]
type = SCH_START_STOP
display_name = Test 5
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = MON
time_start = 10:30:00
time_end = 19:33:00


[SCH_EXCLUDE_WATER_HEAT_BY_DAY]
type = SCH_START_STOP
display_name = Exclude Water Heat During Day
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = ALL
time_start = 09:00:00
time_end = 18:00:00

[SCH_RUN_LIGHTS_AT_NIGHT]
type = SCH_START_STOP
display_name = Run Lights at Night
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = ALL
time_start = 22:00:00
time_end = 09:00:00

[SCH_RESET_MIN_MAX_COUNTERS]
type = SCH_ONE_SHOT
display_name = Reset Min and Max Daily Counters
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = ALL
time_start = 11:00:00

[SCH_WATERING_TOP_SCHEDULE]
type = SCH_START_DURATION_REPEAT
display_name = Watering Schedule Top Sprinklers
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = ALL
time_start = 00:00:00
time_duration = 00:00:45
time_repeat = 00:1:20

[SCH_WATERING_BOTTOM_SCHEDULE]
type = SCH_START_DURATION_REPEAT
display_name = Watering Schedule Bottom Sprinklers
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = ALL
time_start = 00:01:00
time_duration = 00:00:30
time_repeat = 00:01:10

[SCH_TEST6]
type = SCH_START_DURATION_REPEAT
display_name = Test 6
description = 
# ALL, MON, TUE, WED, THU, FRI, SAT, SUN
days = ALL
time_start = 01:00:00
time_duration = 00:00:10
time_repeat = 00:02:00


#************************************************
# Rules
#************************************************/
[rules]
rule1 = RL_TURN_ON_WATER_HEAT_IF_INSIDE_COLD
rule2 = RL_RUN_LIGHTS_ON_SCHEDULE
rule3 = RL_FAN_IF_INSIDE_BOTTOM_HOT_OUTSIDE_COLD
rule4 = RL_CIRCULATE_IF_TOP_HOT_AND_BOTTOM_COLD
rule5 = RL_SUSPEND_WATERING_IF_BOTH_DOORS_OPEN
rule6 = RL_WATER_ON_SCHEDULE_TOP
rule7 = RL_WATER_ON_SCHEDULE_BOTTOM 
#rule9 =  
#rule10 =  
#rule11 =

[RL_TURN_ON_WATER_HEAT_IF_INSIDE_COLD]
type = RL_LOGIC_SINGLENOT
display_name = Water Heat Warming Inside
description =
param1 = MON_INSIDE_AVERAGE_TOO_COLD
#param2 =
param_not = SCH_EXCLUDE_WATER_HEAT_BY_DAY


[RL_RUN_LIGHTS_ON_SCHEDULE]
type = RL_LOGIC_SINGLE
display_name = Light Schedule
description =
param1 = SCH_RUN_LIGHTS_AT_NIGHT
#param_not = 


[RL_FAN_IF_INSIDE_BOTTOM_HOT_OUTSIDE_COLD]
type = RL_LOGIC_AND
display_name = Cooling Fan
description =
param1 = MON_INSIDE_BOTTOM_TOO_HOT
param2 = MON_OUTSIDE_COLD
#param_not = 


[RL_CIRCULATE_IF_TOP_HOT_AND_BOTTOM_COLD]
type = RL_LOGIC_ANDNOT
display_name = Circualtion Fan
description =
param1 = MON_INSIDE_TOP_TOO_HOT
param2 = MON_INSIDE_BOTTOM_TOO_COLD
#prevent if cold air being sucked in already
param_not = RL_FAN_IF_INSIDE_BOTTOM_HOT_OUTSIDE_COLD   


[RL_SUSPEND_WATERING_IF_BOTH_DOORS_OPEN]
type = RL_LOGIC_AND
display_name = Suspend Watering
description =
param1 = MON_LOAD_DOOR_OPEN
param2 = MON_HARVEST_DOOR_OPEN
;param_not = 


[RL_WATER_ON_SCHEDULE_TOP]
type = RL_LOGIC_SINGLENOT
display_name = Water Cycle Top
description =
param1 = SCH_WATERING_TOP_SCHEDULE
param_not = RL_SUSPEND_WATERING_IF_BOTH_DOORS_OPEN


[RL_WATER_ON_SCHEDULE_BOTTOM]
type = RL_LOGIC_SINGLENOT
display_name = Water Cycle Bottom
description =
param1 = SCH_WATERING_BOTTOM_SCHEDULE
param_not = RL_SUSPEND_WATERING_IF_BOTH_DOORS_OPEN


#************************************************
# Controllers
#************************************************/
[controllers]
controller1 = CON_WATER_HEATER_CONTROLLER
controller2 = CON_END_LIGHTS_CONTROLLER
controller3 = CON_FRESH_AIR_CONTROLLER
controller4 = CON_CIRCULATION_FAN_CONTROLLER
controller5 = CON_EXHAUST_FAN_CONTROLLER
controller6 = CON_WATERING_TOP_CONTROLLER
controller7 = CON_WATERING_BOTTOM_CONTROLLER
#controller8 = CON_SYSTEM_MIN_MAX_RESET 
#controller9 = 
#controller10 = 

[CON_WATER_HEATER_CONTROLLER]
type = CON_ONOFF
display_name = Water Heating Controller
description = 
rule = RL_TURN_ON_WATER_HEAT_IF_INSIDE_COLD
output = OUT_WATER_HEATER
act_cmd = CMD_OUTPUT_ON
deact_cmd = CMD_OUTPUT_OFF

[CON_END_LIGHTS_CONTROLLER]
type = CON_ONOFF
display_name = End Lights Controller
description = 
rule = RL_RUN_LIGHTS_ON_SCHEDULE
output = OUT_END_LIGHTS
act_cmd = CMD_OUTPUT_ON
deact_cmd = CMD_OUTPUT_OFF

[CON_FRESH_AIR_CONTROLLER]
type = CON_ONOFF
display_name = Fresh Air Controller
description = 
rule = RL_FAN_IF_INSIDE_BOTTOM_HOT_OUTSIDE_COLD
output = OUT_FRESH_AIR_FAN
act_cmd = CMD_OUTPUT_ON
deact_cmd = CMD_OUTPUT_OFF

[CON_CIRCULATION_FAN_CONTROLLER]
type = CON_ONOFF
display_name = Circulation Fan Controller
description = 
rule = RL_CIRCULATE_IF_TOP_HOT_AND_BOTTOM_COLD
output = OUT_CIRCULATION_FAN
act_cmd = CMD_OUTPUT_ON
deact_cmd = CMD_OUTPUT_OFF

[CON_EXHAUST_FAN_CONTROLLER]
type = CON_ONOFF
display_name = Exhaust Fan Controller
description = 
rule = RL_FAN_IF_INSIDE_BOTTOM_HOT_OUTSIDE_COLD
output = OUT_EXHAUST_FAN
act_cmd = CMD_OUTPUT_ON
deact_cmd = CMD_OUTPUT_OFF

[CON_WATERING_TOP_CONTROLLER]
type = CON_ONOFF
display_name = Top Sprinklers Solenoid Controller
description = 
rule = RL_WATER_ON_SCHEDULE_TOP
output = OUT_WATERING_SOLENOID_TOP
act_cmd = CMD_OUTPUT_ON
deact_cmd = CMD_OUTPUT_OFF

[CON_WATERING_BOTTOM_CONTROLLER]
type = CON_ONOFF
display_name = Bottom Sprinklers Solenoid Controller
description = 
rule = RL_WATER_ON_SCHEDULE_BOTTOM
output = OUT_WATERING_SOLENOID_BOTTOM
act_cmd = CMD_OUTPUT_ON
deact_cmd = CMD_OUTPUT_OFF

[CON_SYSTEM_MIN_MAX_RESET]
type = CON_SYSTEM
display_name = System Min Mix Reset Controller
description = 
rule = RL_RESET_MIN_MAX_ON_SCHEDULE
output = OUT_SYSTEM_INTERNAL
act_cmd = CMD_RESET_MIN_MAX
#deact_cmd =

#************************************************
# Outputs
#************************************************
[outputs]
output1 = OUT_END_LIGHTS
output2 = OUT_WATER_HEATER
output3 = OUT_FRESH_AIR_FAN
output4 = OUT_CIRCULATION_FAN
output5 = OUT_EXHAUST_FAN
output6 = OUT_WATERING_SOLENOID_TOP
output7 = OUT_WATERING_SOLENOID_BOTTOM
#output8 = OUT_SYSTEM_INTERNAL 
#output9 = 

[OUT_SYSTEM_INTERNAL]
type = OUT_SYSTEM_CALL
display_name = Internal System Call
description = Send ACT_CMD to SYSTEM
interface = SYSTEM_FUNCTION
#if_num = 

[OUT_END_LIGHTS]
type = OUT_DIGITAL
display_name = Fluro Lights
description = Relay to Control Fluro End Lights
interface = DIG_PIN_OUT
if_num = 30

[OUT_WATER_HEATER]
type = OUT_DIGITAL
display_name = Header Tank Heater
description = Relay to Control Header Tank Water Heater
interface = DIG_PIN_OUT
if_num = 32

[OUT_FRESH_AIR_FAN]
type = OUT_DIGITAL
display_name = Fresh Air Fan
description = Relay to Control Fresh Air Fan
interface = DIG_PIN_OUT
if_num = 

[OUT_CIRCULATION_FAN]
type = OUT_DIGITAL
display_name = Circulation Fan
description = Relay to Control the Circulation Fan
interface = DIG_PIN_OUT
if_num = 

[OUT_EXHAUST_FAN]
type = OUT_DIGITAL
display_name = Exhaust Fan
description = Relay to Control the Exhaust Fan
interface = DIG_PIN_OUT
if_num = 

[OUT_WATERING_SOLENOID_TOP]
type = OUT_DIGITAL
display_name = Water Value Top
description = Relay to Control the Top Watering Solenoid
interface = DIG_PIN_OUT
if_num = 

[OUT_WATERING_SOLENOID_BOTTOM]
type = OUT_DIGITAL
display_name = Water Value Bottom
description = Relay to Control the Bottom Watering Solenoid
interface = DIG_PIN_OUT
if_num =