Smart-TimeTable.github.io/mdsyllabus.html at master · uttams237/Smart-TimeTable.github.io · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
<!DOCTYPE html>
<html>
<head><title>Machine Drawing & CAD-Syllabus</title></head>
<body>
<h2>IPPC-201 Machine Drawing & CAD </h2>
<h3>Section A</h3>
<h5>Drawing of Components</h5>
<p>
    Review of Principle of orthographic projections, Limits, fits, and
    tolerances of size and form; Types and grade, use of tolerance tables and specification of
    tolerances, form and cumulative tolerances, tolerance dimensioning, general tolerances; Surface
    quality symbols, terminology and representation on drawings, correlation of tolerances and
    surface quality with manufacturing techniques. Sectioning and conventional representation.

</p><hr>
<h5>Detachable Fasteners</h5>
<p>
    Screw threads, approximate and conventional representations;
    Specifications; Threaded fasteners: Types, forms, standard, and specifications; Drawing of
    temporary connections; Foundation bolts; Locking Devices: Classification, principles of
    operation, standard types and their proportions; Shaft Couplings: Common types, standard
    proportions for some couplings: Assembly and disassembly of the following Coupling: Pin
    type, flexible coupling, cone friction clutch; Pipe Joints, common pipe connections.
</p><hr>
<h5>Permanent Fastenings</h5>
<p>
Rivets: Standard forms and proportions; Riveted Joints: Common
types of joints, terminology, proportions and representation; Welds: Types of welds and welded
joints, edge preparation, specifications, and representation of welds on drawings.
</p>
<hr>

<h3>Section B</h3>
<h5>Assembly Drawings</h5>
<p>Review of sheet preparation, boundary lines, zones, title block, revision
    panel, parts list, numbering of components and associated detail drawings; Assembly drawings
    of various machine sub-assemblies and assemblies from detail drawings, sketched and actual
    machine components
</p><hr>

<h5>Boiler Mountings</h5>
<p>Steam stop valve, feed check valve, Rams bottom safety valve, blow off
    cock.
</p><hr>

<h5>Bearings</h5>
<p>Swivel bearing, thrust bearing, plumber block
</p><hr>


<h3>Section C</h3>
<h5>Miscellaneous</h5>
<p>Screw jack, drill press vice, connecting rod, eccentric, Lathe tailstock.
</p><hr>

<h5>CAD Practice</h5>
<p>use of various application software like AutoCAD, Pro-E Creo etc. for
    drawing of the above listed machine components and their assemblies.
</p><hr>

<h5>NOTE</h5>
<p>First angle projection to be used. Drawings should contain bill of materials and should
    illustrate surface finish. The syllabus given above indicates the broad outlines and the scope of
    the subject to be covered.
</p>
</body>
</html>