Pattern doesn't show up in the legend

[pyite]

I have tried more or less every ggpattern + legend example I could find in Google and there doesn't appear to be a way to get the pattern into the legend.

Same bug & software versions as this guy: https://community.rstudio.com/t/stripe-pattern-in-ggplot2-legend/130577

This is on Ubuntu 22.04, which means:
R 4.1.2
ggpattern 0.4.2

I'm not opposed to an ugly workaround to get my graph done... is there a known combination of software versions that works?

Thanks,
Mark

[trevorld]

Your issue is not reproducible for me . I see the same (pattern in legend as expected) as ibertchen does in https://community.rstudio.com/t/stripe-pattern-in-ggplot2-legend/130577/2

I'm using R 4.2.1, ggpattern 0.4.3-4 (development version), and Ubuntu 20.04

Are you using x11(type = "cairo") to view the plots?

[pyite]

I'm using ggsave to write to a png file. I'll try the other method next.

Edit: I tried the above x11 command but the legend pattern is still missing. Sounds like I should try R 4.2.1 next.

Thanks,
Mark

[pyite]

I installed the 4.2 versions from cloud.r-project.org but still have the missing pattern problem. Weird.

I'll try fresh installs on a couple of distros and see if that gives any clues.

[trevorld]

Are you starting R in the terminal with R --vanilla and then copying and pasting the commands from https://community.rstudio.com/t/stripe-pattern-in-ggplot2-legend/130577/2 ?

Besides playing with size of the keys i.e. theme(legend.key.size = unit(2, 'cm')) in {ggplot2} can also play with the pattern_key_scale_factor aesthetic...

[dylangomes]

I was having a similar issue: https://stackoverflow.com/q/75103256/9096420 and playing with the size of the keys theme(legend.key.size = unit(2, 'cm')) did not seem to help at the values I tried, but pattern_key_scale_factor did help. Trial and error landed me at pattern_key_scale_factor=.5 for a pdf of 12 x 9 inches.

[derrik-gratz]

I had a similar issue where the legend would sometimes appear with certain figure dimensions but not all. It worked with fig.height=6 and fig.width=8, but not with larger dimensions. I was also able to resolve it with the above suggestion of setting pattern_key_scale_factor=0.5.