No Configurable ThirdRealityMotionCluster Available in ZHA on latest firmware. (0x0000003a)

[aredon]

From the readme:

My ZHA:

I noticed that the behavior/length of the motion detection delay has changed over the last couple firmware updates so I had wanted to configure this so that it can be reliable over the long term. However, I am unable to find the required cluster. Any guidance would be appreciated.

[aredon]

I see some changes were made to the motion readme but these features are still not available to me.

[rich33584]

I would also like to adjust these parameters. The newest update added an almost 1 second delay between motion detected and it reporting the motion.

[epweston]

I too am have 2 second delays with the last 2 firmware updates and I'm loosing wife approval.

[aredon]

I too am have 2 second delays with the last 2 firmware updates and I'm loosing wife approval.

In the short term you can just add delays to the motion triggers in home assistant.

[rich33584]

Delays dont fix the lag in reprting to home assistant there has been motion. thats the bigger issue.

[rich33584]

I have noticed that you have to remove the device from ZHA and then add it back in to see the new clusters.