Skip to content

README.md

Latest commit

 

History

History
26 lines (16 loc) · 917 Bytes

README.md

File metadata and controls

26 lines (16 loc) · 917 Bytes

CDFR 2026 Control Board

Description

This program is designed for the CDFR control board. This board supports motor control, odometry for position sensing, closed-loop control, and I2C communication. The program is intended to run on an STM32F401RC.

I2C (Slave mode only)

The I2C adress of this bord is 42 in decimal.

find interface documentation

Installation

To install this project, follow these steps:

  1. Clone the repository to your local machine.
  2. Open the project with Visual Studio Code and the PlatformIO extension.
  3. Connect an STLink as follows:
  4. Make sure the 2 STLink jumpers are disconnected.
  5. Make sure the correct port is set up in the platform.ini file.

Author

This program was created by Guillaume DALLE (2023-2025) (guillaume.dalle@grenoble-inp.org) and Ludovic BOUCHARD (2025-) (ludovicb1239@gmail.com)