Wrote a tag successfully (PETG Basic Black) to a Mifare Classic 1k FUID tag (the one linked here: #7 (comment)). I follow the instructions and wrote it manually in proxmark. Here's the hf mf info:
[usb] pm3 --> hf mf info
[=] --- ISO14443-a Information -----------------------------
[+] UID: AC B5 BB 39
[+] ATQA: 00 04
[+] SAK: 08 [1]
[=] --- Keys Information
[+] loaded 2 user keys
[+] loaded 61 hardcoded keys
[+] Sector 0 key B... 000000000000
[+] Sector 1 key B... 000000000000
[+] Backdoor key..... same as key A/B
[+] Block 0.......... ACB5BB399B08040004DE9A78CF4F8A90 | .�.x�O..
[=] --- Fingerprint
[+] n/a
[=] --- Magic Tag Information
[+] Magic capabilities... Gen 4 GDM / USCUID ( Gen4 Magic Wakeup )
[=] --- PRNG Information
[+] Prng....... weak
Pretty sure that means the write was successful. I can post the whole dump if that is helpful.
However, I can't seem to get the AMS to read it. Tried taping it on the outside of left and right of the cardboard spool, roughly where I see the official bambu RFID tags located. Tried sticking it on a plastic utensil and waving it around where the sensor should be when loading the filament. Tried clicking "re-read" in the AMS UI. Always it just ends up as a "?" in the UI and the filament is not auto detected. Any idea on what I can do to debug? Thanks! This project is super useful
Wrote a tag successfully (PETG Basic Black) to a Mifare Classic 1k FUID tag (the one linked here: #7 (comment)). I follow the instructions and wrote it manually in proxmark. Here's the
hf mf info:Pretty sure that means the write was successful. I can post the whole dump if that is helpful.
However, I can't seem to get the AMS to read it. Tried taping it on the outside of left and right of the cardboard spool, roughly where I see the official bambu RFID tags located. Tried sticking it on a plastic utensil and waving it around where the sensor should be when loading the filament. Tried clicking "re-read" in the AMS UI. Always it just ends up as a "?" in the UI and the filament is not auto detected. Any idea on what I can do to debug? Thanks! This project is super useful