[ 5.047270] ufshcd-qcom 1d84000.ufs: freq-table-hz property not specified
[ 5.047483] qcom-pcie 1c00000.pcie: supply vdda not found, using dummy regulator
[ 5.054255] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 5.061883] qcom-pcie 1c00000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 5.070182] mmc0: SDHCI controller on 8804000.mmc [8804000.mmc] using ADMA 64-bit
[ 5.072678] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 5.080766] qcom-pcie 1c00000.pcie:ufshost bridge /soc@0/pcie@1c00000 ranges:
[ 5.100575] ufshcd-qcom 1d84000.ufs: MCQ resource not found in device tree
[ 5.106177] qcom-pcie 1c00000.pcie: IO 0x0040200000..0x00402fffff -> 0x0000000000
[ 5.113234] ufshcd-qcom 1d84000.ufs: MCQ mode is disabled, err=-19
[ 5.113237] scsi host0: ufshcd
[ 5.121462] qcom-pcie 1c00000.pcie: MEM 0x0040300000..0x0063ffffff -> 0x0040300000
[ 10.205844] ufshcd-qcom 1d84000.ufs: uic cmd 0x16 with arg3 0x0 completion timeout
[ 15.325845] ufshcd-qcom 1d84000.ufs: uic cmd 0x16 with arg3 0x0 completion timeout
[ 20.445845] ufshcd-qcom 1d84000.ufs: uic cmd 0x16 with arg3 0x0 completion timeout
[ 25.565841] ufshcd-qcom 1d84000.ufs: uic cmd 0x16 with arg3 0x0 completion timeout
[ 25.573628] ufshcd-qcom 1d84000.ufs: link startup failed -110
[ 25.580036] ufshcd-qcom 1d84000.ufs: error -ETIMEDOUT: Initialization failed with error -110
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.MXF.2.5.3-00341-KAANAPALI-1
Bootup issue seen on Kaanapali device from UFS driver on kernel version 7.0-rc6 :
UFS initialization is timing out in this case.
Issue is due to below change that got merged in 7.0-rc6 :
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v7.0-rc6&id=81af9e40e2e4e1aa95f09fb34811760be6742c58