diff --git a/1209/2044/index.md b/1209/2044/index.md
new file mode 100644
index 00000000..ac4ff561
--- /dev/null
+++ b/1209/2044/index.md
@@ -0,0 +1,12 @@
+---
+layout: pid
+title: KBP Macro Pad
+owner: kennyblackprinting
+license: GPLv2
+site: https://github.com/YodaDistro
+source: https://github.com/YodaDistro/qmk_firmware/tree/YodaPico
+---
+The KBP Macro Pad is a 16 direct pin wired macro pad built on a personally designed 3D printed 4x4 pad. It uses mechanical key switches for its direct wired inputs.
+Utilizes a Raspberry Pi Pico as a controller that plugs into any computer via USB Micro.
+
+Firmware uses QMK and can be found at the above source (will update QMK link when merged). Licensed as GPL2+.
\ No newline at end of file
diff --git a/org/kennyblackprinting/index.md b/org/kennyblackprinting/index.md
new file mode 100644
index 00000000..14d85dea
--- /dev/null
+++ b/org/kennyblackprinting/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Kenny Black Printing LLC
+site: https://github.com/YodaDistro
+---
+I am designing a 3D printed case and wired direct pin macro pad for distribution using open source code and QMK Firmware.
\ No newline at end of file