Remove Neutron Linux Bridge agent code

Linux Bridge agent support was removed in the Neutron
master branch in [0], let's remove any code here now
as well since it will just fail.

[0] https://review.opendev.org/c/openstack/neutron/+/927216

Change-Id: Idffa6579000322acfeb860189fb83a317d56bb4e

Author: brianphaley

doc/source/guides/neutron.rst

@@ -451,44 +451,6 @@ by default. If you want to remove all the extension drivers (even
 'port_security'), set ``Q_ML2_PLUGIN_EXT_DRIVERS`` to blank.
 
 
-Using Linux Bridge instead of Open vSwitch
-------------------------------------------
-
-The configuration for using the Linux Bridge ML2 driver is fairly
-straight forward. The Linux Bridge configuration for DevStack is similar
-to the :ref:`Open vSwitch based single interface <single-interface-ovs>`
-setup, with small modifications for the interface mappings.
-
-
-::
-
-    [[local|localrc]]
-    HOST_IP=172.18.161.6
-    SERVICE_HOST=172.18.161.6
-    MYSQL_HOST=172.18.161.6
-    RABBIT_HOST=172.18.161.6
-    GLANCE_HOSTPORT=172.18.161.6:9292
-    ADMIN_PASSWORD=secret
-    DATABASE_PASSWORD=secret
-    RABBIT_PASSWORD=secret
-    SERVICE_PASSWORD=secret
-
-    ## Neutron options
-    Q_USE_SECGROUP=True
-    FLOATING_RANGE="172.18.161.0/24"
-    IPV4_ADDRS_SAFE_TO_USE="10.0.0.0/24"
-    Q_FLOATING_ALLOCATION_POOL=start=172.18.161.250,end=172.18.161.254
-    PUBLIC_NETWORK_GATEWAY="172.18.161.1"
-    PUBLIC_INTERFACE=eth0
-
-    Q_USE_PROVIDERNET_FOR_PUBLIC=True
-
-    # Linuxbridge Settings
-    Q_AGENT=linuxbridge
-    LB_PHYSICAL_INTERFACE=eth0
-    PUBLIC_PHYSICAL_NETWORK=default
-    LB_INTERFACE_MAPPINGS=default:eth0
-
 Using MacVTap instead of Open vSwitch
 ------------------------------------------
 
@@ -556,7 +518,7 @@ the MacVTap mechanism driver:
 
     [[local|localrc]]
     ...
-    Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,linuxbridge,macvtap
+    Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,macvtap
     ...
 
 For the MacVTap compute node, use this local.conf:

doc/source/overview.rst

@@ -56,7 +56,7 @@ OpenStack Network
 -----------------
 
 -  Neutron: A basic configuration approximating the original FlatDHCP
-   mode using linuxbridge or OpenVSwitch.
+   mode using OpenVSwitch.
 
 Services
 --------

lib/neutron

@@ -241,8 +241,7 @@ TENANT_VLAN_RANGE=${TENANT_VLAN_RANGE:-}
 # If using VLANs for tenant networks, or if using flat or VLAN
 # provider networks, set in ``localrc`` to the name of the physical
 # network, and also configure ``OVS_PHYSICAL_BRIDGE`` for the
-# openvswitch agent or ``LB_PHYSICAL_INTERFACE`` for the linuxbridge
-# agent, as described below.
+# openvswitch agent, as described below.
 #
 # Example: ``PHYSICAL_NETWORK=default``
 PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-public}
@@ -257,18 +256,6 @@ PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-public}
 # Example: ``OVS_PHYSICAL_BRIDGE=br-eth1``
 OVS_PHYSICAL_BRIDGE=${OVS_PHYSICAL_BRIDGE:-br-ex}
 
-# With the linuxbridge agent, if using VLANs for tenant networks,
-# or if using flat or VLAN provider networks, set in ``localrc`` to
-# the name of the network interface to use for the physical
-# network.
-#
-# Example: ``LB_PHYSICAL_INTERFACE=eth1``
-if [[ $Q_AGENT == "linuxbridge" && -z ${LB_PHYSICAL_INTERFACE} ]]; then
-    default_route_dev=$( (ip route; ip -6 route) | grep ^default | head -n 1 | awk '{print $5}')
-    die_if_not_set $LINENO default_route_dev "Failure retrieving default route device"
-    LB_PHYSICAL_INTERFACE=$default_route_dev
-fi
-
 # With the openvswitch plugin, set to True in ``localrc`` to enable
 # provider GRE tunnels when ``ENABLE_TENANT_TUNNELS`` is False.
 #
@@ -889,10 +876,6 @@ function cleanup_neutron {
         neutron_ovs_base_cleanup
     fi
 
-    if [[ $Q_AGENT == "linuxbridge" ]]; then
-        neutron_lb_cleanup
-    fi
-
     # delete all namespaces created by neutron
     for ns in $(sudo ip netns list | grep -o -E '(qdhcp|qrouter|fip|snat)-[0-9a-f-]*'); do
         sudo ip netns delete ${ns}

lib/neutron_plugins/linuxbridge_agent

@@ -114,9 +114,6 @@ function neutron_plugin_configure_service {
     populate_ml2_config /$Q_PLUGIN_CONF_FILE securitygroup enable_security_group=$Q_USE_SECGROUP
 
     populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2 mechanism_drivers=$Q_ML2_PLUGIN_MECHANISM_DRIVERS
-    if [[ "$Q_ML2_PLUGIN_MECHANISM_DRIVERS" == *"linuxbridge"* ]]; then
-        iniset $NEUTRON_CONF experimental linuxbridge True
-    fi
     populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2 overlay_ip_version=$TUNNEL_IP_VERSION
 
     if [[ -n "$Q_ML2_PLUGIN_TYPE_DRIVERS" ]]; then

lib/neutron_plugins/ml2

@@ -334,16 +334,6 @@ function _neutron_configure_router_v4 {
         local ext_gw_interface="none"
         if is_neutron_ovs_base_plugin; then
             ext_gw_interface=$(_neutron_get_ext_gw_interface)
-        elif [[ "$Q_AGENT" = "linuxbridge" ]]; then
-            # Get the device the neutron router and network for $FIXED_RANGE
-            # will be using.
-            if [ "$Q_USE_PROVIDERNET_FOR_PUBLIC" = "True" ]; then
-                # in provider nets a bridge mapping uses the public bridge directly
-                ext_gw_interface=$PUBLIC_BRIDGE
-            else
-                # e.x. brq3592e767-da for NET_ID 3592e767-da66-4bcb-9bec-cdb03cd96102
-                ext_gw_interface=brq${EXT_NET_ID:0:11}
-            fi
         fi
         if [[ "$ext_gw_interface" != "none" ]]; then
             local cidr_len=${FLOATING_RANGE#*/}

lib/neutron_plugins/services/l3

@@ -31,7 +31,6 @@
     'nova-compute',
     'neutron-dhcp-agent',
     'neutron-l3-agent',
-    'neutron-linuxbridge-agent',
     'neutron-metadata-agent',
     'neutron-openvswitch-agent',
     'cinder-volume',