config-linux: Add Intel RDT/MBA Linux support

Add support for Intel Resource Director Technology (RDT) /
Memory Bandwidth Allocation (MBA). Add memory bandwidth resource
constraints in Linux-specific configuration.

In this PR, the spec for memory bandwidth (memBwSchema) keeps
the same format as existed spec for L3 cache (l3CacheSchema)
for consistency and compatibility in runtime-spec 1.x.

Example:

"linux": {
    "intelRdt": {
        "l3CacheSchema": "L3:0=7f0;1=1f",
        "memBwSchema": "MB:0=20;1=70"
    }
}

This is the prerequisite of this runc proposal:
opencontainers/runc#1596

For more information about Intel RDT/MBA, please refer to:
opencontainers/runc#1596

Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>

Author: xiaochenshen

config-linux.md

@@ -491,24 +491,35 @@ You MUST specify at least one of the `hcaHandles` or `hcaObjects` in a given ent
     If `intelRdt` is set, the runtime MUST write the container process ID to the `<container-id>/tasks` file in a mounted `resctrl` pseudo-filesystem, using the container ID from [`start`](runtime.md#start) and creating the `<container-id>` directory if necessary.
     If no mounted `resctrl` pseudo-filesystem is available in the [runtime mount namespace](glossary.md#runtime-namespace), the runtime MUST [generate an error](runtime.md#errors).
 
-    If `intelRdt` is not set, the runtime MUST NOT manipulate any `resctrl` pseudo-filesystems.
+If `intelRdt` is not set, the runtime MUST NOT manipulate any `resctrl` pseudo-filesystems.
 
 The following parameters can be specified for the container:
 
 * **`l3CacheSchema`** *(string, OPTIONAL)* - specifies the schema for L3 cache id and capacity bitmask (CBM).
-    If `l3CacheSchema` is set, runtimes MUST write the value to the `schemata` file in the `<container-id>` directory discussed in `intelRdt`.
+    The value SHOULD start with `L3:` and SHOULD NOT contain newlines.
+* **`memBwSchema`** *(string, OPTIONAL)* - specifies the schema of memory bandwidth percentage per L3 cache id.
+    The value MUST start with `MB:` and MUST NOT contain newlines.
 
-    If `l3CacheSchema` is not set, runtimes MUST NOT write to `schemata` files in any `resctrl` pseudo-filesystems.
+If both `l3CacheSchema` and `memBwSchema` are set, runtimes MUST write the combined value to the `schemata` file in the `<container-id>` directory discussed in `intelRdt`.
+If `l3CacheSchema` contains a line beginning with `MB:`, the value written to `schemata` file MUST be the non-`MB:` line(s) from `l3CacheSchema` and the line from `memBWSchema`.
+
+If either `l3CacheSchema` or `memBwSchema` is set, runtimes MUST write the value to the `schemata` file in the `<container-id>` directory discussed in `intelRdt`.
+
+If neither `l3CacheSchema` nor `memBwSchema` is set, runtimes MUST NOT write to `schemata` files in any `resctrl` pseudo-filesystems.
 
 ### Example
 
-Consider a two-socket machine with two L3 caches where the default CBM is 0xfffff and the max CBM length is 20 bits.
-Tasks inside the container only have access to the "upper" 80% of L3 cache id 0 and the "lower" 50% L3 cache id 1:
+Consider a two-socket machine with two L3 caches where the default CBM is 0x7ff and the max CBM length is 11 bits,
+and minimum memory bandwidth of 10% with a memory bandwidth granularity of 10%.
+
+Tasks inside the container only have access to the "upper" 7/11 of L3 cache on socket 0 and the "lower" 5/11 L3 cache on socket 1,
+and may use a maximum memory bandwidth of 20% on socket 0 and 70% on socket 1.
 
 ```json
 "linux": {
     "intelRdt": {
-        "l3CacheSchema": "L3:0=ffff0;1=3ff"
+        "l3CacheSchema": "L3:0=7f0;1=1f",
+        "memBwSchema": "MB:0=20;1=70"
     }
 }
 ```

schema/config-linux.json

@@ -230,6 +230,10 @@
                 "properties": {
                     "l3CacheSchema": {
                         "type": "string"
+                    },
+                    "memBwSchema": {
+                        "type": "string",
+                        "pattern": "^MB:[^\\n]*$"
                     }
                 }
             }

specs-go/config.go

@@ -160,8 +160,8 @@ type Linux struct {
 	ReadonlyPaths []string `json:"readonlyPaths,omitempty"`
 	// MountLabel specifies the selinux context for the mounts in the container.
 	MountLabel string `json:"mountLabel,omitempty"`
-	// IntelRdt contains Intel Resource Director Technology (RDT) information
-	// for handling resource constraints (e.g., L3 cache) for the container
+	// IntelRdt contains Intel Resource Director Technology (RDT) information for
+	// handling resource constraints (e.g., L3 cache, memory bandwidth) for the container
 	IntelRdt *LinuxIntelRdt `json:"intelRdt,omitempty"`
 }
 
@@ -621,10 +621,14 @@ type LinuxSyscall struct {
 	Args   []LinuxSeccompArg  `json:"args,omitempty"`
 }
 
-// LinuxIntelRdt has container runtime resource constraints
-// for Intel RDT/CAT which introduced in Linux 4.10 kernel
+// LinuxIntelRdt has container runtime resource constraints for Intel RDT
+// CAT and MBA features which introduced in Linux 4.10 and 4.12 kernel
 type LinuxIntelRdt struct {
 	// The schema for L3 cache id and capacity bitmask (CBM)
 	// Format: "L3:<cache_id0>=<cbm0>;<cache_id1>=<cbm1>;..."
 	L3CacheSchema string `json:"l3CacheSchema,omitempty"`
+
+	// The schema of memory bandwidth percentage per L3 cache id
+	// Format: "MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;..."
+	MemBwSchema string `json:"memBwSchema,omitempty"`
 }