NOTE: This document is incomplete.
The OP-1 is made up of the following parts:
- Aluminium Chassis
- Speaker
- UI Board
- Display
- DSP Board
- Battery
- IO Board
- Keyboard
- Ribbon cable (connects all PCB:s together)
The display size is listed as 320x160 pixels. In reality it's a lot bigger vertically as part of it is hidden under the keyboard. The actual size is 320x240. In addition to this mismatch the actual visible portion of the display is actually closer to 150px high.
- Part Number: 74-X000045
- Width: 68mm
- Height: 49mm
- Resolution: 320x240 px
- Usable resolution: ~ 320x150 px
The OP-1 battery is a 3.7V li-polymer battery rated at 1800 mAh.
- Width: 70mm
- Height: 50mm
- Depth: 7mm Source: iFixit
The model number is 055070 and the connector type is probably a JST ACH. Source: operator-1.com The connector on the PCB looks like BM02B-ACHSS-GAN-TF(LF)(SN) and the connector on the battery looks like ACHR-02V-S.
TODO: Verify connector type and exact part number.
- Main processor: ADSP-BF524C2
Additional info:
Source: @Punji at operator-1.com
The three S9C are Analog Devices ADG884 audio switches.
The 23017 is an I/O expander.
The 3576 is a power management IC with USB OTG support.
The 5810D is an OLED power source.
The 345B is an accelerometer IC.
The LFKQ is a LTC2941 battery gas gauge monitor.