PowerWalker VFI 2000 CRM LCD

[mammutserver]

Manufacturer: PowerWalker
Models: VFI 1000/2000/3000 CRM/CRM LCD

https://powerwalker.com/de/produkt/10122001/

[jimklimov]

Thanks... is this a "confirmed working" report? Or an opposite? Can you post some data dumps, if available?

[mammutserver]

Output of nut-scanner:

[nutdev1]
        driver = "nutdrv_qx"
        port = "auto"
        vendorid = "0665"
        productid = "5161"
        bus = "002"
        device = "002"
        busport = "001"
        ###NOTMATCHED-YET###bcdDevice = "0003"

Output of upsc:

battery.charge: 98
battery.energysave: no
battery.packs: 1
battery.protection: yes
battery.runtime: 1920
battery.voltage: 054.4
battery.voltage.high: 52.00
battery.voltage.low: 41.60
battery.voltage.nominal: 48.0
device.model: WPHVR2K0
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: nutdrv_qx
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 1
driver.parameter.port: auto
driver.parameter.productid: 5161
driver.parameter.synchronous: auto
driver.parameter.vendorid: 0665
driver.state: quiet
driver.version: 2.8.1
driver.version.data: Voltronic 0.08
driver.version.internal: 0.36
driver.version.usb: libusb-1.0.27 (API: 0x100010a)
input.frequency: 50.0
input.frequency.high: 53.0
input.frequency.low: 47.0
input.frequency.nominal: 50.0
input.phases: 1
input.transfer.high: 242
input.transfer.high.max: 254
input.transfer.high.min: 237
input.transfer.low: 218
input.transfer.low.max: 223
input.transfer.low.min: 206
input.voltage: 236.1
input.voltage.nominal: 230.0
output.current: 1.7
output.current.nominal: 8
output.frequency: 50.0
output.frequency.nominal: 50.0
output.phases: 1
output.power.maximum.percent: 20
output.power.minimum.percent: 21
output.powerfactor: 0.8
output.voltage: 229.8
output.voltage.nominal: 230.0
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 01072.07
ups.firmware.aux: P01
ups.load: 22
ups.power.nominal: 2000
ups.productid: 5161
ups.start.auto: yes
ups.start.battery: yes
ups.status: OL
ups.temperature: 27.7
ups.type: online
ups.vendorid: 0665

[mammutserver]

Thanks... is this a "confirmed working" report? Or an opposite? Can you post some data dumps, if available?

I also had to add SUBSYSTEM=="usb", ATTR{idVendor}=="0665", ATTR{idProduct}=="5161", MODE="0664", GROUP="nut" in /etc/udev/rules.d/99-nut-ups.rules to get the UPS working.

If needed I can help you out with more data dumps or tests.

[mammutserver]

@jimklimov I dumped the data using the nut-ddl-dump.sh script and opened a PR: networkupstools/nut-ddl#59

Please let me know if I can help in any way.

[jimklimov]

Thanks, that PR looks good :)