diff --git a/setup/clean-install-grimblast.sh b/setup/clean-install-grimblast.sh
new file mode 100755
index 000000000..cd0ce373e
--- /dev/null
+++ b/setup/clean-install-grimblast.sh
@@ -0,0 +1,13 @@
+#!/usr/bin/env bash
+
+# Assume grimblast was installed manually, and uninstall instances
+while [ -n "$(which grimblast 2>/dev/null)" ]; do
+    sudo rm -v "$(which grimblast)"
+done
+
+# Install grimblast from source
+GRIMBLAST_BUILD_DIR=$(mktemp -d)
+trap 'rm -fr "$GRIMBLAST_BUILD_DIR"' EXIT
+git clone --depth=1 https://github.com/hyprwm/contrib.git "$GRIMBLAST_BUILD_DIR"
+make -C "$GRIMBLAST_BUILD_DIR/grimblast"
+sudo make -C "$GRIMBLAST_BUILD_DIR/grimblast" install
diff --git a/setup/post-fedora.sh b/setup/post-fedora.sh
index 6a7d9935f..a40417199 100755
--- a/setup/post-fedora.sh
+++ b/setup/post-fedora.sh
@@ -63,7 +63,7 @@ sudo pip install pywalfox
 # Grimblast
 # --------------------------------------------------------------
 
-sudo cp $repo_path/setup/scripts/grimblast /usr/bin
+source $repo_path/setup/clean-install-grimblast.sh
 
 # --------------------------------------------------------------
 # Cursors
diff --git a/setup/post-opensuse.sh b/setup/post-opensuse.sh
index 1d87d37b2..6e299edd7 100755
--- a/setup/post-opensuse.sh
+++ b/setup/post-opensuse.sh
@@ -84,7 +84,7 @@ pipx install pywalfox
 # Grimblast
 # --------------------------------------------------------------
 
-sudo cp $repo_path/setup/scripts/grimblast /usr/bin
+source $repo_path/setup/clean-install-grimblast.sh
 
 # --------------------------------------------------------------
 # Cursors
diff --git a/setup/scripts/grimblast b/setup/scripts/grimblast
deleted file mode 100755
index c12ace1ef..000000000
--- a/setup/scripts/grimblast
+++ /dev/null
@@ -1,276 +0,0 @@
-#!/usr/bin/env bash
-## Grimblast: a helper for screenshots within hyprland
-## Requirements:
-##  - `grim`: screenshot utility for wayland
-##  - `slurp`: to select an area
-##  - `hyprctl`: to read properties of current window (provided by Hyprland)
-##  - `hyprpicker`: to freeze the screen when selecting area
-##  - `wl-copy`: clipboard utility (provided by wl-clipboard)
-##  - `jq`: json utility to parse hyprctl output
-##  - `notify-send`: to show notifications (provided by libnotify)
-## Those are needed to be installed, if unsure, run `grimblast check`
-##
-## See `man 1 grimblast` or `grimblast usage` for further details.
-
-## Author: Misterio (https://github.com/misterio77)
-
-## This tool is based on grimshot, with swaymsg commands replaced by their
-## hyprctl equivalents.
-## https://github.com/swaywm/sway/blob/master/contrib/grimshot
-
-# Check whether another instance is running
-
-grimblastInstanceCheck="${XDG_RUNTIME_DIR:-$XDG_CACHE_DIR:-$HOME/.cache}/grimblast.lock"
-if [ -e "$grimblastInstanceCheck" ]; then
-  exit 2
-else
-  touch "$grimblastInstanceCheck"
-fi
-trap "rm -f '$grimblastInstanceCheck'" EXIT
-
-getTargetDirectory() {
-  test -f "${XDG_CONFIG_HOME:-$HOME/.config}/user-dirs.dirs" &&
-    . "${XDG_CONFIG_HOME:-$HOME/.config}/user-dirs.dirs"
-
-  echo "${XDG_SCREENSHOTS_DIR:-${XDG_PICTURES_DIR:-$HOME}}"
-}
-
-tmp_editor_directory() {
-  echo "/tmp"
-}
-
-#Detect if $GRIMBLAST_EDITOR env exist
-env_editor_confirm() {
-  if [ -n "$GRIMBLAST_EDITOR" ]; then
-    echo "GRIMBLAST_EDITOR is set. Continuing..."
-  else
-    echo "GRIMBLAST_EDITOR is not set. Defaulting to gimp"
-    GRIMBLAST_EDITOR=gimp
-  fi
-}
-
-NOTIFY=no
-CURSOR=
-FREEZE=
-WAIT=no
-SCALE=
-HYPRPICKER_PID=-1
-
-while [ $# -gt 0 ]; do
-  key="$1"
-
-  case $key in
-  -n | --notify)
-    NOTIFY=yes
-    shift # past argument
-    ;;
-  -c | --cursor)
-    CURSOR=yes
-    shift # past argument
-    ;;
-  -f | --freeze)
-    FREEZE=yes
-    shift # past argument
-    ;;
-  -w | --wait)
-    shift
-    WAIT=$1
-    if echo "$WAIT" | grep "[^0-9]" -q; then
-      echo "Invalid value for wait '$WAIT'" >&2
-      exit 3
-    fi
-    shift
-    ;;
-  -s | --scale)
-    shift # past argument
-    if [ $# -gt 0 ]; then
-      SCALE="$1" # assign the next argument to SCALE
-      shift      # past argument
-    else
-      echo "Error: Missing argument for --scale option."
-      exit 1
-    fi
-    ;;
-  *)      # unknown option
-    break # done with parsing --flags
-    ;;
-  esac
-done
-
-ACTION=${1:-usage}
-SUBJECT=${2:-screen}
-FILE=${3:-$(getTargetDirectory)/$(date -Ins).png}
-FILE_EDITOR=${3:-$(tmp_editor_directory)/$(date -Ins).png}
-
-if [ "$ACTION" != "save" ] && [ "$ACTION" != "copy" ] && [ "$ACTION" != "edit" ] && [ "$ACTION" != "copysave" ] && [ "$ACTION" != "check" ]; then
-  echo "Usage:"
-  echo "  grimblast [--notify] [--cursor] [--freeze] [--wait N] [--scale <scale>] (copy|save|copysave|edit) [active|screen|output|area] [FILE|-]"
-  echo "  grimblast check"
-  echo "  grimblast usage"
-  echo ""
-  echo "Commands:"
-  echo "  copy: Copy the screenshot data into the clipboard."
-  echo "  save: Save the screenshot to a regular file or '-' to pipe to STDOUT."
-  echo "  copysave: Combine the previous 2 options."
-  echo "  edit: Open screenshot in the image editor of your choice (default is gimp). See man page for info."
-  echo "  check: Verify if required tools are installed and exit."
-  echo "  usage: Show this message and exit."
-  echo ""
-  echo "Targets:"
-  echo "  active: Currently active window."
-  echo "  screen: All visible outputs."
-  echo "  output: Currently active output."
-  echo "  area: Manually select a region or window."
-  exit
-fi
-
-notify() {
-  notify-send -t 3000 -a grimblast "$@"
-}
-
-notifyOk() {
-  [ "$NOTIFY" = "no" ] && return
-
-  notify "$@"
-}
-
-notifyError() {
-  if [ $NOTIFY = "yes" ]; then
-    TITLE=${2:-"Screenshot"}
-    MESSAGE=${1:-"Error taking screenshot with grim"}
-    notify -u critical "$TITLE" "$MESSAGE"
-  else
-    echo "$1"
-  fi
-}
-
-killHyprpicker() {
-  if [ ! $HYPRPICKER_PID -eq -1 ]; then
-    kill $HYPRPICKER_PID
-  fi
-}
-
-die() {
-  killHyprpicker
-  MSG=${1:-Bye}
-  notifyError "Error: $MSG"
-  exit 2
-}
-
-check() {
-  COMMAND=$1
-  if command -v "$COMMAND" >/dev/null 2>&1; then
-    RESULT="OK"
-  else
-    RESULT="NOT FOUND"
-  fi
-  echo "   $COMMAND: $RESULT"
-}
-
-takeScreenshot() {
-  FILE=$1
-  GEOM=$2
-  OUTPUT=$3
-  if [ -n "$OUTPUT" ]; then
-    grim ${CURSOR:+-c} ${SCALE:+-s "$SCALE"} -o "$OUTPUT" "$FILE" || die "Unable to invoke grim"
-  elif [ -z "$GEOM" ]; then
-    grim ${CURSOR:+-c} ${SCALE:+-s "$SCALE"} "$FILE" || die "Unable to invoke grim"
-  else
-    grim ${CURSOR:+-c} ${SCALE:+-s "$SCALE"} -g "$GEOM" "$FILE" || die "Unable to invoke grim"
-  fi
-}
-
-wait() {
-  if [ "$WAIT" != "no" ]; then
-    sleep "$WAIT"
-  fi
-}
-
-if [ "$ACTION" = "check" ]; then
-  echo "Checking if required tools are installed. If something is missing, install it to your system and make it available in PATH..."
-  check grim
-  check slurp
-  check hyprctl
-  check hyprpicker
-  check wl-copy
-  check jq
-  check notify-send
-  exit
-elif [ "$SUBJECT" = "active" ]; then
-  wait
-  FOCUSED=$(hyprctl activewindow -j)
-  GEOM=$(echo "$FOCUSED" | jq -r '"\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"')
-  APP_ID=$(echo "$FOCUSED" | jq -r '.class')
-  WHAT="$APP_ID window"
-elif [ "$SUBJECT" = "screen" ]; then
-  wait
-  GEOM=""
-  WHAT="Screen"
-elif [ "$SUBJECT" = "output" ]; then
-  wait
-  GEOM=""
-  OUTPUT=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)' | jq -r '.name')
-  WHAT="$OUTPUT"
-elif [ "$SUBJECT" = "area" ]; then
-  if [ "$FREEZE" = "yes" ] && [ "$(command -v "hyprpicker")" ] >/dev/null 2>&1; then
-    hyprpicker -r -z &
-    sleep 0.2
-    HYPRPICKER_PID=$!
-  fi
-
-  # disable animation for layer namespace "selection" (slurp)
-  # this removes the black border seen around screenshots
-  hyprctl keyword layerrule "noanim,selection" >/dev/null
-
-  WORKSPACES="$(hyprctl monitors -j | jq -r '[(foreach .[] as $monitor (0; if $monitor.specialWorkspace.name == "" then $monitor.activeWorkspace else $monitor.specialWorkspace end)).id]')"
-  WINDOWS="$(hyprctl clients -j | jq -r --argjson workspaces "$WORKSPACES" 'map(select([.workspace.id] | inside($workspaces)))')"
-  # shellcheck disable=2086 # if we don't split, spaces mess up slurp
-  GEOM=$(echo "$WINDOWS" | jq -r '.[] | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"' | slurp $SLURP_ARGS)
-
-  # Check if user exited slurp without selecting the area
-  if [ -z "$GEOM" ]; then
-    killHyprpicker
-    exit 1
-  fi
-  WHAT="Area"
-  wait
-elif [ "$SUBJECT" = "window" ]; then
-  die "Subject 'window' is now included in 'area'"
-else
-  die "Unknown subject to take a screen shot from" "$SUBJECT"
-fi
-
-if [ "$ACTION" = "copy" ]; then
-  takeScreenshot - "$GEOM" "$OUTPUT" | wl-copy --type image/png || die "Clipboard error"
-  notifyOk "$WHAT copied to buffer"
-elif [ "$ACTION" = "save" ]; then
-  if takeScreenshot "$FILE" "$GEOM" "$OUTPUT"; then
-    TITLE="Screenshot of $SUBJECT"
-    MESSAGE=$(basename "$FILE")
-    notifyOk "$TITLE" "$MESSAGE" -i "$FILE"
-    echo "$FILE"
-  else
-    notifyError "Error taking screenshot with grim"
-  fi
-elif [ "$ACTION" = "edit" ]; then
-  env_editor_confirm
-  if takeScreenshot "$FILE_EDITOR" "$GEOM" "$OUTPUT"; then
-    TITLE="Screenshot of $SUBJECT"
-    MESSAGE="Open screenshot in image editor"
-    notifyOk "$TITLE" "$MESSAGE" -i "$FILE_EDITOR"
-    $GRIMBLAST_EDITOR "$FILE_EDITOR"
-    echo "$FILE_EDITOR"
-  else
-    notifyError "Error taking screenshot"
-  fi
-else
-  if [ "$ACTION" = "copysave" ]; then
-    takeScreenshot - "$GEOM" "$OUTPUT" | tee "$FILE" | wl-copy --type image/png || die "Clipboard error"
-    notifyOk "$WHAT copied to buffer and saved to $FILE" -i "$FILE"
-    echo "$FILE"
-  else
-    notifyError "Error taking screenshot with grim"
-  fi
-fi
-
-killHyprpicker