Test

Michael Rook · Michael Rook · commit 209ec63e9345 · 2025-11-29T22:27:55.000+11:00
diff --git a/.github/workflows/build_ubuntu.yml b/.github/workflows/build_ubuntu.yml
@@ -1,6 +1,6 @@
 name: Build Linux
 
-on: [pull_request]
+#on: [pull_request]
 
 jobs:
   appimage-builder:
diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
@@ -10521,9 +10521,6 @@ msgstr ""
 msgid "inner wall/outer wall/inner wall"
 msgstr ""
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr ""
-
 msgid "Print infill first"
 msgstr ""
 
diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po
@@ -10631,9 +10631,6 @@ msgstr ""
 msgid "inner wall/outer wall/inner wall"
 msgstr ""
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr ""
-
 msgid "Print infill first"
 msgstr ""
 
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
@@ -10774,9 +10774,6 @@ msgstr "außen/innen"
 msgid "inner wall/outer wall/inner wall"
 msgstr "innen/außen/innen"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "innen/außen/innen/innen"
-
 msgid "Print infill first"
 msgstr "Zuerst die Füllung drucken"
 
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
@@ -10675,9 +10675,6 @@ msgstr "outer/inner"
 msgid "inner wall/outer wall/inner wall"
 msgstr "inner wall/outer wall/inner wall"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "inner wall/outer wall/inner wall/inner wall"
-
 msgid "Print infill first"
 msgstr "Print infill first"
 
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
@@ -10779,9 +10779,6 @@ msgstr "exterior/interior"
 msgid "inner wall/outer wall/inner wall"
 msgstr "pared interior/pared exterior/pared interior"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "pared interior/pared exterior/pared interior/pared interior"
-
 msgid "Print infill first"
 msgstr "Imprima primero el relleno"
 
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
@@ -10756,9 +10756,6 @@ msgstr "ext./int."
 msgid "inner wall/outer wall/inner wall"
 msgstr "int/ ext/ int"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "int/ ext/ int/ int"
-
 msgid "Print infill first"
 msgstr "Remplissage en premier"
 
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
@@ -10770,9 +10770,6 @@ msgstr "külső/belső"
 msgid "inner wall/outer wall/inner wall"
 msgstr "belső fal/külső fal/belső fal"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "belső fal/külső fal/belső fal/belső fal"
-
 msgid "Print infill first"
 msgstr "Kitöltés a falak előtt"
 
diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po
@@ -10764,9 +10764,6 @@ msgstr "esterno/interno"
 msgid "inner wall/outer wall/inner wall"
 msgstr "parete interna/parete esterna/parete interna"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "parete interna/parete esterna/parete interna/parete interna"
-
 msgid "Print infill first"
 msgstr "Stampa prima il riempimento"
 
diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po
@@ -10728,9 +10728,6 @@ msgstr "外側/内側"
 msgid "inner wall/outer wall/inner wall"
 msgstr "内壁 / 外壁 / 内壁"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "内壁 / 外壁 / 内壁 / 内壁"
-
 msgid "Print infill first"
 msgstr "最初にインフィルを印刷する"
 
diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po
@@ -10758,9 +10758,6 @@ msgstr "외부/내부"
 msgid "inner wall/outer wall/inner wall"
 msgstr "내벽/외벽/내벽"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "내벽/외벽/내벽/내벽"
-
 msgid "Print infill first"
 msgstr "먼저 채우기 출력"
 
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
@@ -10775,9 +10775,6 @@ msgstr "buiten/binnen"
 msgid "inner wall/outer wall/inner wall"
 msgstr "binnenwand/buitenwand/binnenwand"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "binnenwand/buitenwand/binnenwand/binnenwand"
-
 msgid "Print infill first"
 msgstr "Eerst infill afdrukken"
 
diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po
@@ -10796,9 +10796,6 @@ msgstr "zewnętrzna/wewnętrzna"
 msgid "inner wall/outer wall/inner wall"
 msgstr "wewnętrzna/zewnętrzna/wewnętrzna"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "wewnętrzna/zewnętrzna/wewnętrzna/wewnętrzna"
-
 msgid "Print infill first"
 msgstr "Drukuj najpierw wypełnienie"
 
diff --git a/bbl/i18n/pt_BR/BambuStudio_pt_BR.po b/bbl/i18n/pt_BR/BambuStudio_pt_BR.po
@@ -10780,9 +10780,6 @@ msgstr "exterior/interno"
 msgid "inner wall/outer wall/inner wall"
 msgstr "parede interna/parede exterior/parede interna"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "parede interna/parede exterior/parede interna/parede interna"
-
 msgid "Print infill first"
 msgstr "Imprima o preenchimento primeiro"
 
diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po
@@ -10991,9 +10991,6 @@ msgstr "Внешний/Внутренний"
 msgid "inner wall/outer wall/inner wall"
 msgstr "Внутренний/Внешний/Внутренний"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "Внутренний/Внешний/Внутренний/Внутренний"
-
 msgid "Print infill first"
 msgstr "Сначала печатать заполнение"
 
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
@@ -10772,9 +10772,6 @@ msgstr "yttre/ inre"
 msgid "inner wall/outer wall/inner wall"
 msgstr "innervägg/yttervägg/innervägg"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "innervägg/yttervägg/innervägg/innervägg"
-
 msgid "Print infill first"
 msgstr "Printa fyllningen först"
 
diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po
@@ -10767,9 +10767,6 @@ msgstr "dış/iç"
 msgid "inner wall/outer wall/inner wall"
 msgstr "iç duvar/dış duvar/iç duvar"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "iç duvar/dış duvar/iç duvar/iç duvar"
-
 msgid "Print infill first"
 msgstr "Önce dolguyu yazdır"
 
diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po
@@ -10724,9 +10724,6 @@ msgstr "зовнішня/внутрішня"
 msgid "inner wall/outer wall/inner wall"
 msgstr "внутрішня стінка/зовнішня стінка/внутрішня стінка"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "внутрішня стінка/зовнішня стінка/внутрішня стінка/внутрішня стінка"
-
 msgid "Print infill first"
 msgstr "Друкувати заповнення спочатку"
 
diff --git a/bbl/i18n/zh_CN/BambuStudio_zh_CN.po b/bbl/i18n/zh_CN/BambuStudio_zh_CN.po
@@ -10715,9 +10715,6 @@ msgstr "外墙/内墙"
 msgid "inner wall/outer wall/inner wall"
 msgstr "内墙/外墙/内墙"
 
-msgid "inner wall/outer wall/inner wall/inner wall"
-msgstr "内墙/外墙/内墙/内墙"
-
 msgid "Print infill first"
 msgstr "首先打印填充"
 
diff --git a/src/libslic3r/Config.cpp b/src/libslic3r/Config.cpp
@@ -953,6 +953,7 @@ namespace Slic3r
         json j;
         std::list<std::string> different_settings_append;
         std::string new_support_style;
+        std::string is_outer_second;
         std::string is_infill_first;
         std::string get_wall_sequence;
         bool is_project_settings = false;
@@ -1108,6 +1109,9 @@ namespace Slic3r
                             {
                                 different_settings_append.push_back("is_infill_first");
                                 is_infill_first = "true";
+
+                                // different_settings_append.push_back("is_outer_second");
+                                // is_outer_second = "true";
                             }
                         }
                     }
@@ -1186,6 +1190,12 @@ namespace Slic3r
                     opt->value = smsTreeHybrid;
                 }
 
+                if (!is_outer_second.empty())
+                {
+                    ConfigOptionBool *opt = this->option<ConfigOptionBool>("is_outer_second", true);
+                    opt->value = true;
+                }
+
                 if (!is_infill_first.empty())
                 {
                     ConfigOptionBool *opt = this->option<ConfigOptionBool>("is_infill_first", true);
@@ -1246,6 +1256,8 @@ namespace Slic3r
                             index = 0;
                         else if (diff_key == "support_style")
                             index = 0;
+                        else if (diff_key == "is_outer_second")
+                            index = 0;
                         else if (diff_key == "is_infill_first")
                             index = 0;
 
diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
diff --git a/src/libslic3r/LayerRegion.cpp b/src/libslic3r/LayerRegion.cpp
diff --git a/src/libslic3r/PerimeterGenerator.cpp b/src/libslic3r/PerimeterGenerator.cpp
diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
