Mode always returns "DIM"

[HimbeersaftLP]

My device is a Controller RGB/WW/CW (0x25).

This is the code I used:

import asyncio
import logging
import pprint

from flux_led.aiodevice import AIOWifiLedBulb

logging.basicConfig(level=logging.DEBUG)

ip = "192.168.1.160"

async def go():
    bulb = AIOWifiLedBulb(ip)

    def _async_updated():
        pprint.pprint(["State Changed!", bulb.raw_state])

    await bulb.async_setup(_async_updated)

    print(bulb.operating_mode)

    await bulb.async_set_device_config(operating_mode="RGB")

    await bulb.async_update();

    print(bulb.operating_mode)


asyncio.run(go())

and this is the output:

DEBUG:asyncio:Using proactor: IocpProactor
DEBUG:flux_led.aioprotocol:('192.168.1.160', 5577) => 0x81 0x8A 0x8B 0x96 (4)
DEBUG:flux_led.aioprotocol:('192.168.1.160', 5577) <= 0x81 0x25 0x24 0x61 0x21 0x13 0x26 0x26 0x26 0x00 0x01 0x00 0x00 0xD2 (14)
DEBUG:flux_led.base_device:192.168.1.160: set_available: Received message 81252461211326262600010000d2
DEBUG:flux_led.base_device:192.168.1.160: State: LEDENETRawState(head=129, model_num=37, power_state=36, preset_pattern=97, mode=33, speed=19, red=38, green=38, blue=38, warm_white=0, version_number=1, cool_white=0, color_mode=0, check_sum=210)
DEBUG:flux_led.base_device:192.168.1.160: unmapped raw state: 129,37,36,97,33,19,38,38,38,0,1,0,0,210,
DEBUG:flux_led.base_device:192.168.1.160: Mapped State: LEDENETRawState(head=129, model_num=37, power_state=36, preset_pattern=97, mode=33, speed=19, red=38, green=38, blue=38, warm_white=0, version_number=1, cool_white=0, color_mode=0, check_sum=210)
['State Changed!',
 LEDENETRawState(head=129, model_num=37, power_state=36, preset_pattern=97, mode=33, speed=19, red=38, green=38, blue=38, warm_white=0, version_number=1, cool_white=0, color_mode=0, check_sum=210)]
DEBUG:flux_led.aiodevice:192.168.1.160: device_config: wiring=None operating_mode=DIM
DIM
DEBUG:flux_led.aioprotocol:('192.168.1.160', 5577) => 0x62 0x03 0x0F 0x74 (4)
DEBUG:flux_led.aioprotocol:('192.168.1.160', 5577) => 0x81 0x8A 0x8B 0x96 (4)
DIM

[HimbeersaftLP]

This issue also affects HomeAssistant, making it always show "DIM" in the operating mode and the color picker always being an RGBWWCW color picker.
@bdraco (sorry for tagging, but it appears you maintain the HASS integration here), should I create a separate issue on the HASS repo?