Support code and API library for the Skywriter Raspberry Pi HAT and breakout board.
##Quick-Install
If you're using Skywriter on a Raspberry Pi, you can use our quick installer to get everything set up and configured for you. Just open up LXTerminal and type:
curl -sSL get.pimoroni.com/skywriter | bash
##Step-by-Step Install
###Pre-Requisites
Skywriter needs i2c enabled, you can use raspi-config to do this, or run:
curl -sSL get.pimoroni.com/i2c | bash
You'll also need to install smbus:
sudo apt-get install python-smbus
###Installation
####From pip
sudo apt-get install python-pip
sudo pip install skywriter
####From source
Clone this library, make your way into this directory:
git clone https://github.com/pimoroni/skywriter-hat
cd skywriter-hat/python/library
And then install the library with:
sudo python setup.py install