Arduino Giga Problem

[donemuhendislik]

Hi All,
Hi all, we try to develop a project by using Arduino Giga R1 WiFi. According to our project, we needed to add a screen Nextion (NX8048P050-011). According to tutorials, we have some options for this as using Nextion.h and just SoftwareSerial.h. Our problem is while we download and include your library, we have an error like this : #error This version of SoftwareSerial supports only 20, 16 and 8MHz processors

How can we solve this problem ? Or you can advice another solution and/or library ?

[donemuhendislik]

Full Error List is here :

C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:362:2: error: #error This version of SoftwareSerial supports only 20, 16 and 8MHz processors
#error This version of SoftwareSerial supports only 20, 16 and 8MHz processors
^~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp: In member function 'bool SoftwareSerial::listen()':
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:418:23: error: 'SREG' was not declared in this scope
uint8_t oldSREG = SREG;
^~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:418:23: note: suggested alternative: 'SET'
uint8_t oldSREG = SREG;
^~~~
SET
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:419:5: error: 'cli' was not declared in this scope
cli();
^~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp: In member function 'void SoftwareSerial::setTX(uint8_t)':
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:593:22: error: 'digitalPinToBitMask' was not declared in this scope
_transmitBitMask = digitalPinToBitMask(tx);
^~~~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:593:22: note: suggested alternative: 'digitalPinToPinName'
_transmitBitMask = digitalPinToBitMask(tx);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:595:27: error: 'portOutputRegister' was not declared in this scope
_transmitPortRegister = portOutputRegister(port);
^~~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:595:27: note: suggested alternative: '_transmitPortRegister'
_transmitPortRegister = portOutputRegister(port);
^~~~~~~~~~~~~~~~~~
_transmitPortRegister
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp: In member function 'void SoftwareSerial::setRX(uint8_t)':
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:604:21: error: 'digitalPinToBitMask' was not declared in this scope
_receiveBitMask = digitalPinToBitMask(rx);
^~~~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:604:21: note: suggested alternative: 'digitalPinToPinName'
_receiveBitMask = digitalPinToBitMask(rx);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:606:26: error: 'portInputRegister' was not declared in this scope
_receivePortRegister = portInputRegister(port);
^~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp: In member function 'void SoftwareSerial::begin(long int)':
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:617:31: error: 'table' was not declared in this scope
for (unsigned i=0; i<sizeof(table)/sizeof(table[0]); ++i)
^~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:617:31: note: suggested alternative: 'tanl'
for (unsigned i=0; i<sizeof(table)/sizeof(table[0]); ++i)
^~~~~
tanl
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:633:9: error: 'digitalPinToPCICR' was not declared in this scope
if (digitalPinToPCICR(_receivePin))
^~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:633:9: note: suggested alternative: 'digitalPinToPort'
if (digitalPinToPCICR(_receivePin))
^~~~~~~~~~~~~~~~~
digitalPinToPort
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:635:46: error: 'digitalPinToPCICRbit' was not declared in this scope
*digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin));
^~~~~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:635:46: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin));
^~~~~~~~~~~~~~~~~~~~
digitalPinToPort
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:635:42: error: '_BV' was not declared in this scope
*digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin));
^~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:635:42: note: suggested alternative: '_B'
*digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin));
^~~
_B
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:636:8: error: 'digitalPinToPCMSK' was not declared in this scope
*digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin));
^~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:636:8: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin));
^~~~~~~~~~~~~~~~~
digitalPinToPort
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:636:46: error: 'digitalPinToPCMSKbit' was not declared in this scope
*digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin));
^~~~~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:636:46: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin));
^~~~~~~~~~~~~~~~~~~~
digitalPinToPort
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp: In member function 'void SoftwareSerial::end()':
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:651:7: error: 'digitalPinToPCMSK' was not declared in this scope
if (digitalPinToPCMSK(_receivePin))
^~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:651:7: note: suggested alternative: 'digitalPinToPort'
if (digitalPinToPCMSK(_receivePin))
^~~~~~~~~~~~~~~~~
digitalPinToPort
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:652:45: error: 'digitalPinToPCMSKbit' was not declared in this scope
*digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin));
^~~~~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:652:45: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin));
^~~~~~~~~~~~~~~~~~~~
digitalPinToPort
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:652:41: error: '_BV' was not declared in this scope
*digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin));
^~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:652:41: note: suggested alternative: '_B'
*digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin));
^~~
_B
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp: In member function 'virtual size_t SoftwareSerial::write(uint8_t)':
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:687:21: error: 'SREG' was not declared in this scope
uint8_t oldSREG = SREG;
^~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:687:21: note: suggested alternative: 'SET'
uint8_t oldSREG = SREG;
^~~~
SET
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:688:3: error: 'cli' was not declared in this scope
cli(); // turn off interrupts for a clean txmit
^~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:692:26: error: 'XMIT_START_ADJUSTMENT' was not declared in this scope
tunedDelay(_tx_delay + XMIT_START_ADJUSTMENT);
^~~~~~~~~~~~~~~~~~~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp: In member function 'virtual void SoftwareSerial::flush()':
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:735:21: error: 'SREG' was not declared in this scope
uint8_t oldSREG = SREG;
^~~~
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:735:21: note: suggested alternative: 'SET'
uint8_t oldSREG = SREG;
^~~~
SET
C:\Users\softw\OneDrive\Documents\Arduino\libraries\SoftwareSerial\SoftwareSerial.cpp:736:3: error: 'cli' was not declared in this scope
cli();
^~~

exit status 1

Compilation error: exit status 1

[Canttax]

Hello, I saw that you had found a solution to connect and exchange values between a Nextion display and a GIGA R1 Wifi arduin.

Would it be possible to have a short explanation of how it works?
For a project I'm trying to send values (e.g. speed, position relative to north...) but I can't get them to display on the screen.
Have you used a voltage booster to raise the arduino's logic level from 3.3V to 5V?
Did you use the nextion library?
If you have the time, would it be possible to have a small example of the "typical" code for this kind of data?

Thank you in advance.
Best regards

[donemuhendislik]

Hello, I saw that you had found a solution to connect and exchange values between a Nextion display and a GIGA R1 Wifi arduin.

Would it be possible to have a short explanation of how it works? For a project I'm trying to send values (e.g. speed, position relative to north...) but I can't get them to display on the screen. Have you used a voltage booster to raise the arduino's logic level from 3.3V to 5V? Did you use the nextion library? If you have the time, would it be possible to have a small example of the "typical" code for this kind of data?

Thank you in advance. Best regards

Hi @Canttax ,

Yes, I solved the problem. No one typed anything or advised a solution. After I wrote this help message, I found the solution.

First of all, just use UART communication ports. There are 4 couples of UART port. (You can find ports and explanations on original documents. Please check Arduino Giga webpage.)

For your second question, no. I don't use any library. I just used message sending / reading on UART. For clue, don't forget EOF endings 3 times on Serial2.print. (ie : Serial2.print("0x00");Serial2.print("0x00");Serial2.print("0x00");)

I could not share any codes because I used this for a customer project.

Good luck 👍🏻