Hello, are you currently using a STM32 control board? Is it possible to use the Mesa control?

[chinaboy2277]

Hello, are you currently using a STM32 control board? Is it possible to use the Mesa control?

If you use a Raspberry Pi SPI connection to connect to an STM32, could you please provide a tutorial video? Thank you.

[iforce2d]

This project only makes some LinuxCNC commands available over a telnet connection. It has nothing to do with any hardware used to build the machine.

It sounds like you might be getting this repo mixed up with my other repo where I did use a STM32 control board. You can find that here: https://github.com/iforce2d/weenyPRU

There is a YouTube video here with some general info, not really a tutorial though: https://youtu.be/huqtlKUg5Zk

Another video where I used the STM32 board to control my large router, this one shows some of the setup: https://youtu.be/HaIe76u16mM

[iforce2d]

As for what this project can do, there is a video here to explain that: https://youtu.be/ib_G0eyn5FM

[chinaboy2277]

OK, thank you. I will study it and get back to you if I have any questions. Thank you very much.