Skip to content

README.md

Latest commit

 

History

History
30 lines (25 loc) · 1.07 KB

README.md

File metadata and controls

30 lines (25 loc) · 1.07 KB

LedSuit-Control

Setup

This code should compile for the Sparkfun ESP8266 Thing. And is used to control a WS2812B Ledstrip (75 LEDS), which in our case was sewed in a LED-Suit

Logic

// Setup

  • create WiFi Hotspot
  • run Webserver ( To fill in WiFi credentials )
  • connect to WiFi
  • sync clock with NTP server

// Control

  • get status from webserver
  • load scenario from webserver
  • parse scenario to 3d array
  • use array to control the suit
byte example_parsed_scenario [PARTS][EVENTS][6] = {
  {{1,1,255,255,255,50},{1,1,255,0,255,50},{1,1,0,255,0,50},{1,1,0,0,255,50}},
  {{2,1,255,255,255,50},{2,1,0,255,255,50},{2,1,255,255,255,50}},
  {{3,1,255,255,255,50},{3,1,255,0,255,50},{3,1,0,255,0,50},{3,1,0,255,0,50}},
  {{4,1,255,255,255,50},{4,1,0,255,255,50},{4,1,0,255,255,50},{4,1,255,0,255,50},{4,1,0,255,0,50}},
  {{5,1,255,255,255,50},{5,1,0,255,255,50},{5,1,0,255,255,50},{5,1,255,0,255,50},{5,1,0,255,0,50}}};

{ PART_ID, MODE_ID, RED_VALUE, GREEN_VALUE, BLUE_VALUE, DELAY_VALUE }

Note: The program doesn't work. However it contains most parts to get it fully working.