R4 would not boot, Noble 6.13

[hajoha]

Hi,

Thanks for the great work! I cloned the repository, installed all the necessary packages for cross-compiling, and ran:

./buildimg.sh bpi-r4 noble 6.13

(See the log below.)

After that, I wrote the image to my SD card using:

gunzip -c bpi-r4_noble_6.13.0-main.img.gz | sudo dd bs=1M status=progress conv=notrunc,fsync of=/dev/sdc

(where /dev/sdc is my SD card).

I then inserted the SD card into the BPI-R4, set both pins to 1, and powered it on—but nothing happened. The boot LED doesn’t light up.

Currently, I don’t have a UART cable to check the output, but I’m in the process of getting one. In the meantime, do you have any ideas on what might be wrong or what I might be missing?

Thanks!

buildimg log

needed: python3 python3-requests parted qemu-user-static debootstrap binfmt-support
create image for bpi-r4 (arm64) noble 6.13
board  : bpi-r4
kernel : 6.13
device : sdmmc
{'imgfile': 'bpi-r4_sdmmc.img.gz', 'kernelfile': 'bpi-r4_6.12.17-main.tar.gz', 'replacehostapd': '1', 'hostapdfile': 'hostapd_arm64.tar.gz'}
binfiles: {'hostapd_arm64.tar.gz': 'https://github.com/frank-w/arm-crosscompile/releases/download/CI-BUILD-2025-01-23/hostapd_arm64.tar.gz', 'hostapd_armhf.tar.gz': 'https://github.com/frank-w/arm-crosscompile/releases/download/CI-BUILD-2025-01-23/hostapd_armhf.tar.gz', 'iproute2_arm64.tar.gz': 'https://github.com/frank-w/arm-crosscompile/releases/download/CI-BUILD-2025-01-23/iproute2_arm64.tar.gz', 'iproute2_armhf.tar.gz': 'https://github.com/frank-w/arm-crosscompile/releases/download/CI-BUILD-2025-01-23/iproute2_armhf.tar.gz'}
board:bpi-r4 ubootfile: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2024-10-bpi-2024.10-2025-01-07_0647/bpi-r4_sdmmc.img.gz
board:bpi-r4 kernelfile: https://github.com/frank-w/BPI-Router-Linux/releases/download/CI-BUILD-6.13-main-6.13.0-2025-01-31_1733/bpi-r4_6.13.0-main.tar.gz
ubootfile: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2024-10-bpi-2024.10-2025-01-07_0647/bpi-r4_sdmmc.img.gz filename: bpi-r4_sdmmc.img.gz
kernelfile: https://github.com/frank-w/BPI-Router-Linux/releases/download/CI-BUILD-6.13-main-6.13.0-2025-01-31_1733/bpi-r4_6.13.0-main.tar.gz filename: bpi-r4_6.13.0-main.tar.gz
hostapdfile: https://github.com/frank-w/arm-crosscompile/releases/download/CI-BUILD-2025-01-23/hostapd_arm64.tar.gz filename: hostapd_arm64.tar.gz
hostapd_arm64.tar.gz already exists
-rw-rw-r-- 1 haa haa 115 Mar 18 12:34 sourcefiles_bpi-r4.conf
image-file: bpi-r4_sdmmc.img.gz
kernel-file: bpi-r4_6.13.0-main.tar.gz
packed rootfs already exists
-rw-rw-r-- 1 haa haa 7.7M Mar 18 12:34 bpi-r4_sdmmc.img.gz
-rw-r--r-- 1 root root 289M Mar 18 12:07 noble_arm64.tar.gz
unpack imgfile (bpi-r4_noble_6.13.0-main.img.gz)...
setting up imgfile to loopdev...
mounting loopdev...
unpack rootfs to bpi-root loopdev...
-rw-rw-r-- 1 haa haa 102M Mar 18 12:34 bpi-r4_6.13.0-main.tar.gz
unpack kernel to bpi-boot loopdev...
mnt/BPI-BOOT:
total 34666
-rwxr-xr-x 1 root root    37386 Jan 31 21:26 bpi-r4.dtb
-rwxr-xr-x 1 root root  9436964 Jan 31 21:26 bpi-r4.itb
-rwxr-xr-x 1 root root        0 Mar 18 12:35 uEnv.txt
-rwxr-xr-x 1 root root 26020416 Jan 31 21:26 uImage_nodt
unpack kernel-modules to bpi-root loopdev...
configure rootfs for bpi-r4...
bpi-r4
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
Hit:1 http://ports.ubuntu.com/ubuntu-ports noble InRelease
Hit:2 http://ports.ubuntu.com/ubuntu-ports noble-security InRelease
Get:3 http://ports.ubuntu.com/ubuntu-ports noble-updates InRelease [126 kB]
Hit:4 http://ports.ubuntu.com/ubuntu-ports noble-backports InRelease
Get:5 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 Packages [923 kB]
Get:6 http://ports.ubuntu.com/ubuntu-ports noble-updates/universe arm64 Packages [1013 kB]
Fetched 2063 kB in 6s (319 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
122 packages can be upgraded. Run 'apt list --upgradable' to see them.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
  ethtool
The following packages will be upgraded:
  base-files bsdutils dbus dbus-bin dbus-daemon dbus-session-bus-common dbus-system-bus-common dbus-user-session dhcpcd-base distro-info-data dmsetup dpkg e2fsprogs eject gcc-14-base gir1.2-glib-2.0 kmod
  krb5-locales less libacl1 libapparmor1 libattr1 libaudit-common libaudit1 libblkid1 libbsd0 libbz2-1.0 libc-bin libc6 libcap2 libcap2-bin libcom-err2 libcryptsetup12 libdbus-1-3 libdevmapper1.02.1 libelf1t64
  libexpat1 libext2fs2t64 libfdisk1 libgcc-s1 libglib2.0-0t64 libglib2.0-data libgmp10 libgnutls30t64 libgpg-error0 libgssapi-krb5-2 libhogweed6t64 libicu74 libidn2-0 libk5crypto3 libkmod2 libkrb5-3
  libkrb5support0 liblz4-1 liblzma5 libmd0 libmount1 libnetplan1 libnettle8t64 libnss-systemd libp11-kit0 libpam-cap libpam-modules libpam-modules-bin libpam-runtime libpam-systemd libpam0g libpcre2-8-0
  libproc2-0 libpython3-stdlib libpython3.12-minimal libpython3.12-stdlib libseccomp2 libselinux1 libsmartcols1 libsqlite3-0 libss2 libssl3t64 libstdc++6 libsystemd-shared libsystemd0 libtasn1-6 libudev1
  libunistring5 libuuid1 libxml2 libzstd1 locales login logsave mount netplan-generator netplan.io openssl passwd perl-base procps python-apt-common python3 python3-apt python3-minimal python3-netplan
  python3-pkg-resources python3.12 python3.12-minimal systemd systemd-dev systemd-hwe-hwdb systemd-resolved systemd-sysv systemd-timesyncd tzdata ubuntu-minimal ubuntu-pro-client ubuntu-pro-client-l10n udev
  util-linux vim-common vim-tiny xkb-data xxd zlib1g
122 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
34 standard LTS security updates
Need to get 56.9 MB of archives.
After this operation, 1521 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 gcc-14-base arm64 14.2.0-4ubuntu2~24.04 [50.8 kB]
Get:2 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libgcc-s1 arm64 14.2.0-4ubuntu2~24.04 [61.9 kB]
Get:3 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libstdc++6 arm64 14.2.0-4ubuntu2~24.04 [751 kB]
Get:4 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libc6 arm64 2.39-0ubuntu8.4 [2775 kB]
Get:5 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 base-files arm64 13ubuntu10.2 [73.3 kB]
Get:6 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 bsdutils arm64 1:2.39.3-9ubuntu6.2 [98.0 kB]
Get:7 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 dpkg arm64 1.22.6ubuntu6.1 [1265 kB]
Get:8 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 login arm64 1:4.13+dfsg1-4ubuntu3.2 [200 kB]
Get:9 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 perl-base arm64 5.38.2-3.2build2.1 [1778 kB]
Get:10 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 util-linux arm64 2.39.3-9ubuntu6.2 [1115 kB]
Get:11 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libc-bin arm64 2.39-0ubuntu8.4 [591 kB]
Get:12 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libaudit-common all 1:3.1.2-2.1build1.1 [5824 B]
Get:13 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libaudit1 arm64 1:3.1.2-2.1build1.1 [47.5 kB]
Get:14 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libpam0g arm64 1.5.3-5ubuntu5.1 [67.9 kB]
Get:15 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libpcre2-8-0 arm64 10.42-4ubuntu2.1 [212 kB]
Get:16 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libselinux1 arm64 3.5-2ubuntu2.1 [79.9 kB]
Get:17 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 systemd-timesyncd arm64 255.4-1ubuntu8.6 [34.8 kB]
Get:18 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libssl3t64 arm64 3.0.13-0ubuntu3.5 [1797 kB]
Get:19 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dbus-session-bus-common all 1.14.10-4ubuntu4.1 [80.5 kB]
Get:20 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libcap2 arm64 1:2.66-5ubuntu2.2 [30.5 kB]
Get:21 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libpam-runtime all 1.5.3-5ubuntu5.1 [40.8 kB]
Get:22 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 systemd-sysv arm64 255.4-1ubuntu8.6 [11.9 kB]
Get:23 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libpam-systemd arm64 255.4-1ubuntu8.6 [232 kB]
Get:24 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dbus-user-session arm64 1.14.10-4ubuntu4.1 [9968 B]
Get:25 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libapparmor1 arm64 4.0.1really4.0.1-0ubuntu0.24.04.3 [50.8 kB]
Get:26 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libexpat1 arm64 2.6.1-2ubuntu0.2 [76.4 kB]
Get:27 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dbus-bin arm64 1.14.10-4ubuntu4.1 [38.8 kB]
Get:28 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dbus-system-bus-common all 1.14.10-4ubuntu4.1 [81.6 kB]
Get:29 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dbus arm64 1.14.10-4ubuntu4.1 [23.9 kB]
Get:30 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dbus-daemon arm64 1.14.10-4ubuntu4.1 [115 kB]
Get:31 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libdbus-1-3 arm64 1.14.10-4ubuntu4.1 [210 kB]
Get:32 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 systemd-resolved arm64 255.4-1ubuntu8.6 [291 kB]
Get:33 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libacl1 arm64 2.3.2-1build1.1 [17.1 kB]
Get:34 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libblkid1 arm64 2.39.3-9ubuntu6.2 [123 kB]
Get:35 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 liblzma5 arm64 5.6.1+really5.4.5-1build0.1 [125 kB]
Get:36 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libzstd1 arm64 1.5.5+dfsg2-2build1.1 [271 kB]
Get:37 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 kmod arm64 31+20240202-2ubuntu7.1 [101 kB]
Get:38 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libkmod2 arm64 31+20240202-2ubuntu7.1 [51.9 kB]
Get:39 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 liblz4-1 arm64 1.9.4-1build1.1 [64.2 kB]
Get:40 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libmount1 arm64 2.39.3-9ubuntu6.2 [133 kB]
Get:41 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libseccomp2 arm64 2.5.5-1ubuntu3.1 [51.2 kB]
Get:42 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 systemd-dev all 255.4-1ubuntu8.6 [104 kB]
Get:43 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 systemd arm64 255.4-1ubuntu8.6 [3404 kB]
Get:44 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 udev arm64 255.4-1ubuntu8.6 [1852 kB]
Get:45 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libnss-systemd arm64 255.4-1ubuntu8.6 [155 kB]
Get:46 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libsystemd-shared arm64 255.4-1ubuntu8.6 [2018 kB]
Get:47 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libudev1 arm64 255.4-1ubuntu8.6 [174 kB]
Get:48 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libdevmapper1.02.1 arm64 2:1.02.185-3ubuntu3.2 [128 kB]
Get:49 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libuuid1 arm64 2.39.3-9ubuntu6.2 [35.7 kB]
Get:50 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libcryptsetup12 arm64 2:2.7.0-1ubuntu4.2 [261 kB]
Get:51 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libfdisk1 arm64 2.39.3-9ubuntu6.2 [142 kB]
Get:52 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 mount arm64 2.39.3-9ubuntu6.2 [116 kB]
Get:53 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libsystemd0 arm64 255.4-1ubuntu8.6 [425 kB]
Get:54 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libpam-modules-bin arm64 1.5.3-5ubuntu5.1 [50.4 kB]
Get:55 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libpam-modules arm64 1.5.3-5ubuntu5.1 [283 kB]
Get:56 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 logsave arm64 1.47.0-2.4~exp1ubuntu4.1 [22.3 kB]
Get:57 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libext2fs2t64 arm64 1.47.0-2.4~exp1ubuntu4.1 [225 kB]
Get:58 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 e2fsprogs arm64 1.47.0-2.4~exp1ubuntu4.1 [594 kB]
Get:59 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 python3-minimal arm64 3.12.3-0ubuntu2 [27.4 kB]
Get:60 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 python3 arm64 3.12.3-0ubuntu2 [23.0 kB]
Get:61 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 tzdata all 2024b-0ubuntu0.24.04.1 [274 kB]
Get:62 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libbz2-1.0 arm64 1.0.8-5.1build0.1 [35.8 kB]
Get:63 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libsqlite3-0 arm64 3.45.1-1ubuntu2.1 [703 kB]
Get:64 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 python3.12 arm64 3.12.3-1ubuntu0.5 [651 kB]
Get:65 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libpython3.12-stdlib arm64 3.12.3-1ubuntu0.5 [2037 kB]
Get:66 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 python3.12-minimal arm64 3.12.3-1ubuntu0.5 [2254 kB]
Get:67 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libpython3.12-minimal arm64 3.12.3-1ubuntu0.5 [831 kB]
Get:68 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 zlib1g arm64 1:1.3.dfsg-3.1ubuntu2.1 [61.7 kB]
Get:69 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libpython3-stdlib arm64 3.12.3-0ubuntu2 [10.0 kB]
Get:70 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libattr1 arm64 1:2.5.2-1build1.1 [11.0 kB]
Get:71 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libgmp10 arm64 2:6.3.0+dfsg-2ubuntu6.1 [243 kB]
Get:72 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libgpg-error0 arm64 1.47-3build2.1 [70.0 kB]
Get:73 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libmd0 arm64 1.1.0-2build1.1 [24.6 kB]
Get:74 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libsmartcols1 arm64 2.39.3-9ubuntu6.2 [64.7 kB]
Get:75 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 passwd arm64 1:4.13+dfsg1-4ubuntu3.2 [838 kB]
Get:76 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libnettle8t64 arm64 3.9.1-2.2build1.1 [192 kB]
Get:77 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libhogweed6t64 arm64 3.9.1-2.2build1.1 [199 kB]
Get:78 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libunistring5 arm64 1.1-2build1.1 [530 kB]
Get:79 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libidn2-0 arm64 2.3.7-2build1.1 [67.2 kB]
Get:80 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libp11-kit0 arm64 0.25.3-4ubuntu2.1 [276 kB]
Get:81 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libtasn1-6 arm64 4.19.0-3ubuntu0.24.04.1 [43.6 kB]
Get:82 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libgnutls30t64 arm64 3.8.3-1.1ubuntu3.3 [945 kB]
Get:83 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libcom-err2 arm64 1.47.0-2.4~exp1ubuntu4.1 [22.6 kB]
Get:84 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libproc2-0 arm64 2:4.0.4-4ubuntu3.2 [58.7 kB]
Get:85 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libss2 arm64 1.47.0-2.4~exp1ubuntu4.1 [16.5 kB]
Get:86 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 procps arm64 2:4.0.4-4ubuntu3.2 [707 kB]
Get:87 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dhcpcd-base arm64 1:10.0.6-1ubuntu3.1 [212 kB]
Get:88 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 distro-info-data all 0.60ubuntu0.2 [6590 B]
Get:89 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 dmsetup arm64 2:1.02.185-3ubuntu3.2 [74.7 kB]
Get:90 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 eject arm64 2.39.3-9ubuntu6.2 [26.5 kB]
Get:91 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 gir1.2-glib-2.0 arm64 2.80.0-6ubuntu3.2 [182 kB]
Get:92 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libglib2.0-0t64 arm64 2.80.0-6ubuntu3.2 [1531 kB]
Get:93 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 krb5-locales all 1.20.1-6ubuntu2.5 [14.5 kB]
Get:94 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 less arm64 590-2ubuntu2.1 [142 kB]
Get:95 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libbsd0 arm64 0.12.1-1build1.1 [41.0 kB]
Get:96 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libpam-cap arm64 1:2.66-5ubuntu2.2 [12.5 kB]
Get:97 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libcap2-bin arm64 1:2.66-5ubuntu2.2 [33.5 kB]
Get:98 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libelf1t64 arm64 0.190-1.1build4.1 [58.1 kB]
Get:99 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libglib2.0-data all 2.80.0-6ubuntu3.2 [48.5 kB]
Get:100 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libk5crypto3 arm64 1.20.1-6ubuntu2.5 [85.8 kB]
Get:101 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libgssapi-krb5-2 arm64 1.20.1-6ubuntu2.5 [142 kB]
Get:102 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libkrb5support0 arm64 1.20.1-6ubuntu2.5 [34.6 kB]
Get:103 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libkrb5-3 arm64 1.20.1-6ubuntu2.5 [349 kB]
Get:104 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libicu74 arm64 74.2-1ubuntu3.1 [10.8 MB]
Get:105 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 python3-netplan arm64 1.1.1-1~ubuntu24.04.1 [22.9 kB]
Get:106 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 netplan-generator arm64 1.1.1-1~ubuntu24.04.1 [60.5 kB]
Get:107 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 ethtool arm64 1:6.7-1build1 [227 kB]
Get:108 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 netplan.io arm64 1.1.1-1~ubuntu24.04.1 [68.6 kB]
Get:109 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libnetplan1 arm64 1.1.1-1~ubuntu24.04.1 [128 kB]
Get:110 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 libxml2 arm64 2.9.14+dfsg-1.3ubuntu3.2 [735 kB]
Get:111 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 locales all 2.39-0ubuntu8.4 [4229 kB]
Get:112 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 openssl arm64 3.0.13-0ubuntu3.5 [984 kB]
Get:113 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 python-apt-common all 2.7.7ubuntu4 [20.4 kB]
Get:114 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 python3-apt arm64 2.7.7ubuntu4 [167 kB]
Get:115 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 python3-pkg-resources all 68.1.2-2ubuntu1.1 [168 kB]
Get:116 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 systemd-hwe-hwdb all 255.1.4 [3200 B]
Get:117 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 ubuntu-pro-client-l10n arm64 34~24.04 [18.4 kB]
Get:118 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 ubuntu-pro-client arm64 34~24.04 [240 kB]
Get:119 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 vim-tiny arm64 2:9.1.0016-1ubuntu7.6 [770 kB]
Get:120 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 vim-common all 2:9.1.0016-1ubuntu7.6 [385 kB]
Get:121 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 ubuntu-minimal arm64 1.539.2 [11.1 kB]
Get:122 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 xkb-data all 2.41-2ubuntu1.1 [397 kB]
Get:123 http://ports.ubuntu.com/ubuntu-ports noble-security/main arm64 xxd arm64 2:9.1.0016-1ubuntu7.6 [63.4 kB]
Fetched 56.9 MB in 5s (12.2 MB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = "en_US.UTF-8",
	LANG = "C"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Extracting templates from packages: 100%
Preconfiguring packages ...
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../gcc-14-base_14.2.0-4ubuntu2~24.04_arm64.deb ...
Unpacking gcc-14-base:arm64 (14.2.0-4ubuntu2~24.04) over (14-20240412-0ubuntu1) ...
Setting up gcc-14-base:arm64 (14.2.0-4ubuntu2~24.04) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libgcc-s1_14.2.0-4ubuntu2~24.04_arm64.deb ...
Unpacking libgcc-s1:arm64 (14.2.0-4ubuntu2~24.04) over (14-20240412-0ubuntu1) ...
Setting up libgcc-s1:arm64 (14.2.0-4ubuntu2~24.04) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libstdc++6_14.2.0-4ubuntu2~24.04_arm64.deb ...
Unpacking libstdc++6:arm64 (14.2.0-4ubuntu2~24.04) over (14-20240412-0ubuntu1) ...
Setting up libstdc++6:arm64 (14.2.0-4ubuntu2~24.04) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libc6_2.39-0ubuntu8.4_arm64.deb ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Unpacking libc6:arm64 (2.39-0ubuntu8.4) over (2.39-0ubuntu8) ...
Setting up libc6:arm64 (2.39-0ubuntu8.4) ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../base-files_13ubuntu10.2_arm64.deb ...
Unpacking base-files (13ubuntu10.2) over (13ubuntu10) ...
Setting up base-files (13ubuntu10.2) ...
Installing new version of config file /etc/issue ...
Installing new version of config file /etc/issue.net ...
Installing new version of config file /etc/lsb-release ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking bsdutils (1:2.39.3-9ubuntu6.2) over (1:2.39.3-9ubuntu6) ...
Setting up bsdutils (1:2.39.3-9ubuntu6.2) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.6ubuntu6.1_arm64.deb ...
Unpacking dpkg (1.22.6ubuntu6.1) over (1.22.6ubuntu6) ...
Setting up dpkg (1.22.6ubuntu6.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../login_1%3a4.13+dfsg1-4ubuntu3.2_arm64.deb ...
Unpacking login (1:4.13+dfsg1-4ubuntu3.2) over (1:4.13+dfsg1-4ubuntu3) ...
Setting up login (1:4.13+dfsg1-4ubuntu3.2) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../perl-base_5.38.2-3.2build2.1_arm64.deb ...
Unpacking perl-base (5.38.2-3.2build2.1) over (5.38.2-3.2build2) ...
Setting up perl-base (5.38.2-3.2build2.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../util-linux_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking util-linux (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Setting up util-linux (2.39.3-9ubuntu6.2) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.39-0ubuntu8.4_arm64.deb ...
Unpacking libc-bin (2.39-0ubuntu8.4) over (2.39-0ubuntu8) ...
Setting up libc-bin (2.39-0ubuntu8.4) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a3.1.2-2.1build1.1_all.deb ...
Unpacking libaudit-common (1:3.1.2-2.1build1.1) over (1:3.1.2-2.1build1) ...
Setting up libaudit-common (1:3.1.2-2.1build1.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a3.1.2-2.1build1.1_arm64.deb ...
Unpacking libaudit1:arm64 (1:3.1.2-2.1build1.1) over (1:3.1.2-2.1build1) ...
Setting up libaudit1:arm64 (1:3.1.2-2.1build1.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libpam0g_1.5.3-5ubuntu5.1_arm64.deb ...
Unpacking libpam0g:arm64 (1.5.3-5ubuntu5.1) over (1.5.3-5ubuntu5) ...
Setting up libpam0g:arm64 (1.5.3-5ubuntu5.1) ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.42-4ubuntu2.1_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.42-4ubuntu2.1) over (10.42-4ubuntu2) ...
Setting up libpcre2-8-0:arm64 (10.42-4ubuntu2.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.5-2ubuntu2.1_arm64.deb ...
Unpacking libselinux1:arm64 (3.5-2ubuntu2.1) over (3.5-2ubuntu2) ...
Setting up libselinux1:arm64 (3.5-2ubuntu2.1) ...
/proc/ is not mounted, but required for successful operation of systemd-tmpfiles. Please mount /proc/. Alternatively, consider using the --root= or --image= switches.
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../systemd-timesyncd_255.4-1ubuntu8.6_arm64.deb ...
Unpacking systemd-timesyncd (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../libssl3t64_3.0.13-0ubuntu3.5_arm64.deb ...
Unpacking libssl3t64:arm64 (3.0.13-0ubuntu3.5) over (3.0.13-0ubuntu3) ...
Setting up libssl3t64:arm64 (3.0.13-0ubuntu3.5) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../dbus-session-bus-common_1.14.10-4ubuntu4.1_all.deb ...
Unpacking dbus-session-bus-common (1.14.10-4ubuntu4.1) over (1.14.10-4ubuntu4) ...
Preparing to unpack .../libcap2_1%3a2.66-5ubuntu2.2_arm64.deb ...
Unpacking libcap2:arm64 (1:2.66-5ubuntu2.2) over (1:2.66-5ubuntu2) ...
Setting up libcap2:arm64 (1:2.66-5ubuntu2.2) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libpam-runtime_1.5.3-5ubuntu5.1_all.deb ...
Unpacking libpam-runtime (1.5.3-5ubuntu5.1) over (1.5.3-5ubuntu5) ...
Setting up libpam-runtime (1.5.3-5ubuntu5.1) ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../00-systemd-sysv_255.4-1ubuntu8.6_arm64.deb ...
Unpacking systemd-sysv (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../01-libpam-systemd_255.4-1ubuntu8.6_arm64.deb ...
Unpacking libpam-systemd:arm64 (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../02-dbus-user-session_1.14.10-4ubuntu4.1_arm64.deb ...
Unpacking dbus-user-session (1.14.10-4ubuntu4.1) over (1.14.10-4ubuntu4) ...
Preparing to unpack .../03-libapparmor1_4.0.1really4.0.1-0ubuntu0.24.04.3_arm64.deb ...
Unpacking libapparmor1:arm64 (4.0.1really4.0.1-0ubuntu0.24.04.3) over (4.0.0-beta3-0ubuntu3) ...
Preparing to unpack .../04-libexpat1_2.6.1-2ubuntu0.2_arm64.deb ...
Unpacking libexpat1:arm64 (2.6.1-2ubuntu0.2) over (2.6.1-2build1) ...
Preparing to unpack .../05-dbus-bin_1.14.10-4ubuntu4.1_arm64.deb ...
Unpacking dbus-bin (1.14.10-4ubuntu4.1) over (1.14.10-4ubuntu4) ...
Preparing to unpack .../06-dbus-system-bus-common_1.14.10-4ubuntu4.1_all.deb ...
Unpacking dbus-system-bus-common (1.14.10-4ubuntu4.1) over (1.14.10-4ubuntu4) ...
Preparing to unpack .../07-dbus_1.14.10-4ubuntu4.1_arm64.deb ...
Unpacking dbus (1.14.10-4ubuntu4.1) over (1.14.10-4ubuntu4) ...
Preparing to unpack .../08-dbus-daemon_1.14.10-4ubuntu4.1_arm64.deb ...
Unpacking dbus-daemon (1.14.10-4ubuntu4.1) over (1.14.10-4ubuntu4) ...
Preparing to unpack .../09-libdbus-1-3_1.14.10-4ubuntu4.1_arm64.deb ...
Unpacking libdbus-1-3:arm64 (1.14.10-4ubuntu4.1) over (1.14.10-4ubuntu4) ...
Preparing to unpack .../10-systemd-resolved_255.4-1ubuntu8.6_arm64.deb ...
Unpacking systemd-resolved (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../11-libacl1_2.3.2-1build1.1_arm64.deb ...
Unpacking libacl1:arm64 (2.3.2-1build1.1) over (2.3.2-1build1) ...
Setting up libacl1:arm64 (2.3.2-1build1.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libblkid1_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking libblkid1:arm64 (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Setting up libblkid1:arm64 (2.39.3-9ubuntu6.2) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../liblzma5_5.6.1+really5.4.5-1build0.1_arm64.deb ...
Unpacking liblzma5:arm64 (5.6.1+really5.4.5-1build0.1) over (5.6.1+really5.4.5-1) ...
Setting up liblzma5:arm64 (5.6.1+really5.4.5-1build0.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libzstd1_1.5.5+dfsg2-2build1.1_arm64.deb ...
Unpacking libzstd1:arm64 (1.5.5+dfsg2-2build1.1) over (1.5.5+dfsg2-2build1) ...
Setting up libzstd1:arm64 (1.5.5+dfsg2-2build1.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../kmod_31+20240202-2ubuntu7.1_arm64.deb ...
Unpacking kmod (31+20240202-2ubuntu7.1) over (31+20240202-2ubuntu7) ...
Preparing to unpack .../libkmod2_31+20240202-2ubuntu7.1_arm64.deb ...
Unpacking libkmod2:arm64 (31+20240202-2ubuntu7.1) over (31+20240202-2ubuntu7) ...
Preparing to unpack .../liblz4-1_1.9.4-1build1.1_arm64.deb ...
Unpacking liblz4-1:arm64 (1.9.4-1build1.1) over (1.9.4-1build1) ...
Setting up liblz4-1:arm64 (1.9.4-1build1.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libmount1_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking libmount1:arm64 (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Setting up libmount1:arm64 (2.39.3-9ubuntu6.2) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1ubuntu3.1_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1ubuntu3.1) over (2.5.5-1ubuntu3) ...
Setting up libseccomp2:arm64 (2.5.5-1ubuntu3.1) ...
(Reading database ... 13004 files and directories currently installed.)
Preparing to unpack .../0-systemd-dev_255.4-1ubuntu8.6_all.deb ...
Unpacking systemd-dev (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../1-systemd_255.4-1ubuntu8.6_arm64.deb ...
Unpacking systemd (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../2-udev_255.4-1ubuntu8.6_arm64.deb ...
Unpacking udev (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../3-libnss-systemd_255.4-1ubuntu8.6_arm64.deb ...
Unpacking libnss-systemd:arm64 (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../4-libsystemd-shared_255.4-1ubuntu8.6_arm64.deb ...
Unpacking libsystemd-shared:arm64 (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Preparing to unpack .../5-libudev1_255.4-1ubuntu8.6_arm64.deb ...
Unpacking libudev1:arm64 (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Setting up libudev1:arm64 (255.4-1ubuntu8.6) ...
(Reading database ... 13005 files and directories currently installed.)
Preparing to unpack .../libdevmapper1.02.1_2%3a1.02.185-3ubuntu3.2_arm64.deb ...
Unpacking libdevmapper1.02.1:arm64 (2:1.02.185-3ubuntu3.2) over (2:1.02.185-3ubuntu3) ...
Preparing to unpack .../libuuid1_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking libuuid1:arm64 (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Setting up libuuid1:arm64 (2.39.3-9ubuntu6.2) ...
(Reading database ... 13005 files and directories currently installed.)
Preparing to unpack .../libcryptsetup12_2%3a2.7.0-1ubuntu4.2_arm64.deb ...
Unpacking libcryptsetup12:arm64 (2:2.7.0-1ubuntu4.2) over (2:2.7.0-1ubuntu4) ...
Preparing to unpack .../libfdisk1_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking libfdisk1:arm64 (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Preparing to unpack .../mount_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking mount (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Preparing to unpack .../libsystemd0_255.4-1ubuntu8.6_arm64.deb ...
Unpacking libsystemd0:arm64 (255.4-1ubuntu8.6) over (255.4-1ubuntu8) ...
Setting up libsystemd0:arm64 (255.4-1ubuntu8.6) ...
(Reading database ... 13005 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.5.3-5ubuntu5.1_arm64.deb ...
Unpacking libpam-modules-bin (1.5.3-5ubuntu5.1) over (1.5.3-5ubuntu5) ...
Setting up libpam-modules-bin (1.5.3-5ubuntu5.1) ...
(Reading database ... 13005 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.5.3-5ubuntu5.1_arm64.deb ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Unpacking libpam-modules:arm64 (1.5.3-5ubuntu5.1) over (1.5.3-5ubuntu5) ...
Setting up libpam-modules:arm64 (1.5.3-5ubuntu5.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../logsave_1.47.0-2.4~exp1ubuntu4.1_arm64.deb ...
Unpacking logsave (1.47.0-2.4~exp1ubuntu4.1) over (1.47.0-2.4~exp1ubuntu4) ...
Preparing to unpack .../libext2fs2t64_1.47.0-2.4~exp1ubuntu4.1_arm64.deb ...
Leaving 'diversion of /lib/aarch64-linux-gnu/libe2p.so.2 to /lib/aarch64-linux-gnu/libe2p.so.2.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/aarch64-linux-gnu/libe2p.so.2.3 to /lib/aarch64-linux-gnu/libe2p.so.2.3.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/aarch64-linux-gnu/libext2fs.so.2 to /lib/aarch64-linux-gnu/libext2fs.so.2.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/aarch64-linux-gnu/libext2fs.so.2.4 to /lib/aarch64-linux-gnu/libext2fs.so.2.4.usr-is-merged by libext2fs2t64'
Unpacking libext2fs2t64:arm64 (1.47.0-2.4~exp1ubuntu4.1) over (1.47.0-2.4~exp1ubuntu4) ...
Setting up libext2fs2t64:arm64 (1.47.0-2.4~exp1ubuntu4.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.47.0-2.4~exp1ubuntu4.1_arm64.deb ...
Unpacking e2fsprogs (1.47.0-2.4~exp1ubuntu4.1) over (1.47.0-2.4~exp1ubuntu4) ...
Preparing to unpack .../python3-minimal_3.12.3-0ubuntu2_arm64.deb ...
Unpacking python3-minimal (3.12.3-0ubuntu2) over (3.12.3-0ubuntu1) ...
Setting up python3-minimal (3.12.3-0ubuntu2) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../python3_3.12.3-0ubuntu2_arm64.deb ...
Unpacking python3 (3.12.3-0ubuntu2) over (3.12.3-0ubuntu1) ...
Preparing to unpack .../tzdata_2024b-0ubuntu0.24.04.1_all.deb ...
Unpacking tzdata (2024b-0ubuntu0.24.04.1) over (2024a-2ubuntu1) ...
Preparing to unpack .../libbz2-1.0_1.0.8-5.1build0.1_arm64.deb ...
Unpacking libbz2-1.0:arm64 (1.0.8-5.1build0.1) over (1.0.8-5.1) ...
Setting up libbz2-1.0:arm64 (1.0.8-5.1build0.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../0-libsqlite3-0_3.45.1-1ubuntu2.1_arm64.deb ...
Unpacking libsqlite3-0:arm64 (3.45.1-1ubuntu2.1) over (3.45.1-1ubuntu2) ...
Preparing to unpack .../1-python3.12_3.12.3-1ubuntu0.5_arm64.deb ...
Unpacking python3.12 (3.12.3-1ubuntu0.5) over (3.12.3-1) ...
Preparing to unpack .../2-libpython3.12-stdlib_3.12.3-1ubuntu0.5_arm64.deb ...
Unpacking libpython3.12-stdlib:arm64 (3.12.3-1ubuntu0.5) over (3.12.3-1) ...
Preparing to unpack .../3-python3.12-minimal_3.12.3-1ubuntu0.5_arm64.deb ...
Unpacking python3.12-minimal (3.12.3-1ubuntu0.5) over (3.12.3-1) ...
Preparing to unpack .../4-libpython3.12-minimal_3.12.3-1ubuntu0.5_arm64.deb ...
Unpacking libpython3.12-minimal:arm64 (3.12.3-1ubuntu0.5) over (3.12.3-1) ...
Preparing to unpack .../5-zlib1g_1%3a1.3.dfsg-3.1ubuntu2.1_arm64.deb ...
Unpacking zlib1g:arm64 (1:1.3.dfsg-3.1ubuntu2.1) over (1:1.3.dfsg-3.1ubuntu2) ...
Setting up zlib1g:arm64 (1:1.3.dfsg-3.1ubuntu2.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libpython3-stdlib_3.12.3-0ubuntu2_arm64.deb ...
Unpacking libpython3-stdlib:arm64 (3.12.3-0ubuntu2) over (3.12.3-0ubuntu1) ...
Preparing to unpack .../libattr1_1%3a2.5.2-1build1.1_arm64.deb ...
Unpacking libattr1:arm64 (1:2.5.2-1build1.1) over (1:2.5.2-1build1) ...
Setting up libattr1:arm64 (1:2.5.2-1build1.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libgmp10_2%3a6.3.0+dfsg-2ubuntu6.1_arm64.deb ...
Unpacking libgmp10:arm64 (2:6.3.0+dfsg-2ubuntu6.1) over (2:6.3.0+dfsg-2ubuntu6) ...
Setting up libgmp10:arm64 (2:6.3.0+dfsg-2ubuntu6.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libgpg-error0_1.47-3build2.1_arm64.deb ...
Unpacking libgpg-error0:arm64 (1.47-3build2.1) over (1.47-3build2) ...
Setting up libgpg-error0:arm64 (1.47-3build2.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libmd0_1.1.0-2build1.1_arm64.deb ...
Unpacking libmd0:arm64 (1.1.0-2build1.1) over (1.1.0-2build1) ...
Setting up libmd0:arm64 (1.1.0-2build1.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Setting up libsmartcols1:arm64 (2.39.3-9ubuntu6.2) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../passwd_1%3a4.13+dfsg1-4ubuntu3.2_arm64.deb ...
Unpacking passwd (1:4.13+dfsg1-4ubuntu3.2) over (1:4.13+dfsg1-4ubuntu3) ...
Setting up passwd (1:4.13+dfsg1-4ubuntu3.2) ...
/proc/ is not mounted, but required for successful operation of systemd-tmpfiles. Please mount /proc/. Alternatively, consider using the --root= or --image= switches.
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libnettle8t64_3.9.1-2.2build1.1_arm64.deb ...
Unpacking libnettle8t64:arm64 (3.9.1-2.2build1.1) over (3.9.1-2.2build1) ...
Setting up libnettle8t64:arm64 (3.9.1-2.2build1.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libhogweed6t64_3.9.1-2.2build1.1_arm64.deb ...
Unpacking libhogweed6t64:arm64 (3.9.1-2.2build1.1) over (3.9.1-2.2build1) ...
Setting up libhogweed6t64:arm64 (3.9.1-2.2build1.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libunistring5_1.1-2build1.1_arm64.deb ...
Unpacking libunistring5:arm64 (1.1-2build1.1) over (1.1-2build1) ...
Setting up libunistring5:arm64 (1.1-2build1.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libidn2-0_2.3.7-2build1.1_arm64.deb ...
Unpacking libidn2-0:arm64 (2.3.7-2build1.1) over (2.3.7-2build1) ...
Setting up libidn2-0:arm64 (2.3.7-2build1.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libp11-kit0_0.25.3-4ubuntu2.1_arm64.deb ...
Unpacking libp11-kit0:arm64 (0.25.3-4ubuntu2.1) over (0.25.3-4ubuntu2) ...
Setting up libp11-kit0:arm64 (0.25.3-4ubuntu2.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libtasn1-6_4.19.0-3ubuntu0.24.04.1_arm64.deb ...
Unpacking libtasn1-6:arm64 (4.19.0-3ubuntu0.24.04.1) over (4.19.0-3build1) ...
Setting up libtasn1-6:arm64 (4.19.0-3ubuntu0.24.04.1) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../libgnutls30t64_3.8.3-1.1ubuntu3.3_arm64.deb ...
Unpacking libgnutls30t64:arm64 (3.8.3-1.1ubuntu3.3) over (3.8.3-1.1ubuntu3) ...
Setting up libgnutls30t64:arm64 (3.8.3-1.1ubuntu3.3) ...
(Reading database ... 13007 files and directories currently installed.)
Preparing to unpack .../00-libcom-err2_1.47.0-2.4~exp1ubuntu4.1_arm64.deb ...
Unpacking libcom-err2:arm64 (1.47.0-2.4~exp1ubuntu4.1) over (1.47.0-2.4~exp1ubuntu4) ...
Preparing to unpack .../01-libproc2-0_2%3a4.0.4-4ubuntu3.2_arm64.deb ...
Unpacking libproc2-0:arm64 (2:4.0.4-4ubuntu3.2) over (2:4.0.4-4ubuntu3) ...
Preparing to unpack .../02-libss2_1.47.0-2.4~exp1ubuntu4.1_arm64.deb ...
Unpacking libss2:arm64 (1.47.0-2.4~exp1ubuntu4.1) over (1.47.0-2.4~exp1ubuntu4) ...
Preparing to unpack .../03-procps_2%3a4.0.4-4ubuntu3.2_arm64.deb ...
Unpacking procps (2:4.0.4-4ubuntu3.2) over (2:4.0.4-4ubuntu3) ...
Preparing to unpack .../04-dhcpcd-base_1%3a10.0.6-1ubuntu3.1_arm64.deb ...
Unpacking dhcpcd-base (1:10.0.6-1ubuntu3.1) over (1:10.0.6-1ubuntu3) ...
Preparing to unpack .../05-distro-info-data_0.60ubuntu0.2_all.deb ...
Unpacking distro-info-data (0.60ubuntu0.2) over (0.60) ...
Preparing to unpack .../06-dmsetup_2%3a1.02.185-3ubuntu3.2_arm64.deb ...
Unpacking dmsetup (2:1.02.185-3ubuntu3.2) over (2:1.02.185-3ubuntu3) ...
Preparing to unpack .../07-eject_2.39.3-9ubuntu6.2_arm64.deb ...
Unpacking eject (2.39.3-9ubuntu6.2) over (2.39.3-9ubuntu6) ...
Preparing to unpack .../08-gir1.2-glib-2.0_2.80.0-6ubuntu3.2_arm64.deb ...
Unpacking gir1.2-glib-2.0:arm64 (2.80.0-6ubuntu3.2) over (2.80.0-6ubuntu1) ...
Preparing to unpack .../09-libglib2.0-0t64_2.80.0-6ubuntu3.2_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.80.0-6ubuntu3.2) over (2.80.0-6ubuntu1) ...
Preparing to unpack .../10-krb5-locales_1.20.1-6ubuntu2.5_all.deb ...
Unpacking krb5-locales (1.20.1-6ubuntu2.5) over (1.20.1-6ubuntu2) ...
Preparing to unpack .../11-less_590-2ubuntu2.1_arm64.deb ...
Unpacking less (590-2ubuntu2.1) over (590-2ubuntu2) ...
Preparing to unpack .../12-libbsd0_0.12.1-1build1.1_arm64.deb ...
Unpacking libbsd0:arm64 (0.12.1-1build1.1) over (0.12.1-1build1) ...
Preparing to unpack .../13-libpam-cap_1%3a2.66-5ubuntu2.2_arm64.deb ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Unpacking libpam-cap:arm64 (1:2.66-5ubuntu2.2) over (1:2.66-5ubuntu2) ...
Preparing to unpack .../14-libcap2-bin_1%3a2.66-5ubuntu2.2_arm64.deb ...
Unpacking libcap2-bin (1:2.66-5ubuntu2.2) over (1:2.66-5ubuntu2) ...
Preparing to unpack .../15-libelf1t64_0.190-1.1build4.1_arm64.deb ...
Unpacking libelf1t64:arm64 (0.190-1.1build4.1) over (0.190-1.1build4) ...
Preparing to unpack .../16-libglib2.0-data_2.80.0-6ubuntu3.2_all.deb ...
Unpacking libglib2.0-data (2.80.0-6ubuntu3.2) over (2.80.0-6ubuntu1) ...
Preparing to unpack .../17-libk5crypto3_1.20.1-6ubuntu2.5_arm64.deb ...
Unpacking libk5crypto3:arm64 (1.20.1-6ubuntu2.5) over (1.20.1-6ubuntu2) ...
Preparing to unpack .../18-libgssapi-krb5-2_1.20.1-6ubuntu2.5_arm64.deb ...
Unpacking libgssapi-krb5-2:arm64 (1.20.1-6ubuntu2.5) over (1.20.1-6ubuntu2) ...
Preparing to unpack .../19-libkrb5support0_1.20.1-6ubuntu2.5_arm64.deb ...
Unpacking libkrb5support0:arm64 (1.20.1-6ubuntu2.5) over (1.20.1-6ubuntu2) ...
Preparing to unpack .../20-libkrb5-3_1.20.1-6ubuntu2.5_arm64.deb ...
Unpacking libkrb5-3:arm64 (1.20.1-6ubuntu2.5) over (1.20.1-6ubuntu2) ...
Preparing to unpack .../21-libicu74_74.2-1ubuntu3.1_arm64.deb ...
Unpacking libicu74:arm64 (74.2-1ubuntu3.1) over (74.2-1ubuntu3) ...
Preparing to unpack .../22-python3-netplan_1.1.1-1~ubuntu24.04.1_arm64.deb ...
Unpacking python3-netplan (1.1.1-1~ubuntu24.04.1) over (1.0-2ubuntu1) ...
Preparing to unpack .../23-netplan-generator_1.1.1-1~ubuntu24.04.1_arm64.deb ...
Adding 'diversion of /lib/systemd/system-generators/netplan to /lib/systemd/system-generators/netplan.usr-is-merged by netplan-generator'
Unpacking netplan-generator (1.1.1-1~ubuntu24.04.1) over (1.0-2ubuntu1) ...
Selecting previously unselected package ethtool.
Preparing to unpack .../24-ethtool_1%3a6.7-1build1_arm64.deb ...
Unpacking ethtool (1:6.7-1build1) ...
Preparing to unpack .../25-netplan.io_1.1.1-1~ubuntu24.04.1_arm64.deb ...
Unpacking netplan.io (1.1.1-1~ubuntu24.04.1) over (1.0-2ubuntu1) ...
Preparing to unpack .../26-libnetplan1_1.1.1-1~ubuntu24.04.1_arm64.deb ...
Unpacking libnetplan1:arm64 (1.1.1-1~ubuntu24.04.1) over (1.0-2ubuntu1) ...
Preparing to unpack .../27-libxml2_2.9.14+dfsg-1.3ubuntu3.2_arm64.deb ...
Unpacking libxml2:arm64 (2.9.14+dfsg-1.3ubuntu3.2) over (2.9.14+dfsg-1.3ubuntu3) ...
Preparing to unpack .../28-locales_2.39-0ubuntu8.4_all.deb ...
Unpacking locales (2.39-0ubuntu8.4) over (2.39-0ubuntu8) ...
Preparing to unpack .../29-openssl_3.0.13-0ubuntu3.5_arm64.deb ...
Unpacking openssl (3.0.13-0ubuntu3.5) over (3.0.13-0ubuntu3) ...
Preparing to unpack .../30-python-apt-common_2.7.7ubuntu4_all.deb ...
Unpacking python-apt-common (2.7.7ubuntu4) over (2.7.7ubuntu1) ...
Preparing to unpack .../31-python3-apt_2.7.7ubuntu4_arm64.deb ...
Unpacking python3-apt (2.7.7ubuntu4) over (2.7.7ubuntu1) ...
Preparing to unpack .../32-python3-pkg-resources_68.1.2-2ubuntu1.1_all.deb ...
Unpacking python3-pkg-resources (68.1.2-2ubuntu1.1) over (68.1.2-2ubuntu1) ...
Preparing to unpack .../33-systemd-hwe-hwdb_255.1.4_all.deb ...
Unpacking systemd-hwe-hwdb (255.1.4) over (255.1.3) ...
Preparing to unpack .../34-ubuntu-pro-client-l10n_34~24.04_arm64.deb ...
Unpacking ubuntu-pro-client-l10n (34~24.04) over (31.2.3) ...
Preparing to unpack .../35-ubuntu-pro-client_34~24.04_arm64.deb ...
Unpacking ubuntu-pro-client (34~24.04) over (31.2.3) ...
Preparing to unpack .../36-vim-tiny_2%3a9.1.0016-1ubuntu7.6_arm64.deb ...
Unpacking vim-tiny (2:9.1.0016-1ubuntu7.6) over (2:9.1.0016-1ubuntu7) ...
Preparing to unpack .../37-vim-common_2%3a9.1.0016-1ubuntu7.6_all.deb ...
Unpacking vim-common (2:9.1.0016-1ubuntu7.6) over (2:9.1.0016-1ubuntu7) ...
Preparing to unpack .../38-ubuntu-minimal_1.539.2_arm64.deb ...
Unpacking ubuntu-minimal (1.539.2) over (1.539) ...
Preparing to unpack .../39-xkb-data_2.41-2ubuntu1.1_all.deb ...
Unpacking xkb-data (2.41-2ubuntu1.1) over (2.41-2ubuntu1) ...
Preparing to unpack .../40-xxd_2%3a9.1.0016-1ubuntu7.6_arm64.deb ...
Unpacking xxd (2:9.1.0016-1ubuntu7.6) over (2:9.1.0016-1ubuntu7) ...
Setting up libexpat1:arm64 (2.6.1-2ubuntu0.2) ...
Setting up libapparmor1:arm64 (4.0.1really4.0.1-0ubuntu0.24.04.3) ...
Setting up distro-info-data (0.60ubuntu0.2) ...
Setting up libsqlite3-0:arm64 (3.45.1-1ubuntu2.1) ...
Setting up libpython3.12-minimal:arm64 (3.12.3-1ubuntu0.5) ...
Setting up less (590-2ubuntu2.1) ...
Setting up xkb-data (2.41-2ubuntu1.1) ...
Setting up systemd-dev (255.4-1ubuntu8.6) ...
Setting up krb5-locales (1.20.1-6ubuntu2.5) ...
Setting up libcom-err2:arm64 (1.47.0-2.4~exp1ubuntu4.1) ...
Setting up locales (2.39-0ubuntu8.4) ...
Generating locales (this might take a while)...
Generation complete.
Setting up xxd (2:9.1.0016-1ubuntu7.6) ...
Setting up libelf1t64:arm64 (0.190-1.1build4.1) ...
Setting up libkrb5support0:arm64 (1.20.1-6ubuntu2.5) ...
Setting up tzdata (2024b-0ubuntu0.24.04.1) ...

Current default time zone: 'Etc/UTC'
Local time is now:      Tue Mar 18 11:39:48 UTC 2025.
Universal Time is now:  Tue Mar 18 11:39:48 UTC 2025.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

Setting up libcap2-bin (1:2.66-5ubuntu2.2) ...
Setting up eject (2.39.3-9ubuntu6.2) ...
Setting up libglib2.0-0t64:arm64 (2.80.0-6ubuntu3.2) ...
No schema files found: doing nothing.
Setting up libglib2.0-data (2.80.0-6ubuntu3.2) ...
Setting up vim-common (2:9.1.0016-1ubuntu7.6) ...
Setting up libdbus-1-3:arm64 (1.14.10-4ubuntu4.1) ...
Setting up libproc2-0:arm64 (2:4.0.4-4ubuntu3.2) ...
Setting up libss2:arm64 (1.47.0-2.4~exp1ubuntu4.1) ...
Setting up dhcpcd-base (1:10.0.6-1ubuntu3.1) ...
Setting up gir1.2-glib-2.0:arm64 (2.80.0-6ubuntu3.2) ...
Setting up libk5crypto3:arm64 (1.20.1-6ubuntu2.5) ...
Setting up logsave (1.47.0-2.4~exp1ubuntu4.1) ...
Setting up libfdisk1:arm64 (2.39.3-9ubuntu6.2) ...
Setting up libicu74:arm64 (74.2-1ubuntu3.1) ...
Setting up libdevmapper1.02.1:arm64 (2:1.02.185-3ubuntu3.2) ...
Setting up python-apt-common (2.7.7ubuntu4) ...
Setting up mount (2.39.3-9ubuntu6.2) ...
Setting up dmsetup (2:1.02.185-3ubuntu3.2) ...
Setting up dbus-session-bus-common (1.14.10-4ubuntu4.1) ...
Setting up procps (2:4.0.4-4ubuntu3.2) ...
Setting up libcryptsetup12:arm64 (2:2.7.0-1ubuntu4.2) ...
Setting up libkrb5-3:arm64 (1.20.1-6ubuntu2.5) ...
Setting up dbus-system-bus-common (1.14.10-4ubuntu4.1) ...
Setting up openssl (3.0.13-0ubuntu3.5) ...
Setting up libbsd0:arm64 (0.12.1-1build1.1) ...
Setting up libpam-cap:arm64 (1:2.66-5ubuntu2.2) ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up libxml2:arm64 (2.9.14+dfsg-1.3ubuntu3.2) ...
Setting up dbus-bin (1.14.10-4ubuntu4.1) ...
Setting up libkmod2:arm64 (31+20240202-2ubuntu7.1) ...
Setting up ethtool (1:6.7-1build1) ...
Setting up python3.12-minimal (3.12.3-1ubuntu0.5) ...
Setting up libpython3.12-stdlib:arm64 (3.12.3-1ubuntu0.5) ...
Setting up python3.12 (3.12.3-1ubuntu0.5) ...
Setting up e2fsprogs (1.47.0-2.4~exp1ubuntu4.1) ...
Setting up dbus-daemon (1.14.10-4ubuntu4.1) ...
/proc/ is not mounted, but required for successful operation of systemd-tmpfiles. Please mount /proc/. Alternatively, consider using the --root= or --image= switches.
Setting up vim-tiny (2:9.1.0016-1ubuntu7.6) ...
Setting up kmod (31+20240202-2ubuntu7.1) ...
Setting up libnetplan1:arm64 (1.1.1-1~ubuntu24.04.1) ...
Setting up dbus (1.14.10-4ubuntu4.1) ...
Setting up libgssapi-krb5-2:arm64 (1.20.1-6ubuntu2.5) ...
Setting up libsystemd-shared:arm64 (255.4-1ubuntu8.6) ...
Setting up libpython3-stdlib:arm64 (3.12.3-0ubuntu2) ...
Setting up python3 (3.12.3-0ubuntu2) ...
Setting up systemd (255.4-1ubuntu8.6) ...
/proc/ is not mounted, but required for successful operation of systemd-tmpfiles. Please mount /proc/. Alternatively, consider using the --root= or --image= switches.
/proc/ is not mounted, but required for successful operation of systemd-tmpfiles. Please mount /proc/. Alternatively, consider using the --root= or --image= switches.
⚠️ /proc/ is not mounted. This is not a supported mode of operation. Please fix
your invocation environment to mount /proc/ and /sys/ properly. Proceeding anyway.
Your mileage may vary.
Setting up systemd-timesyncd (255.4-1ubuntu8.6) ...
Setting up udev (255.4-1ubuntu8.6) ...
/proc/ is not mounted, but required for successful operation of systemd-tmpfiles. Please mount /proc/. Alternatively, consider using the --root= or --image= switches.
Setting up systemd-hwe-hwdb (255.1.4) ...
Setting up python3-netplan (1.1.1-1~ubuntu24.04.1) ...
Setting up netplan-generator (1.1.1-1~ubuntu24.04.1) ...
Removing 'diversion of /lib/systemd/system-generators/netplan to /lib/systemd/system-generators/netplan.usr-is-merged by netplan-generator'
Setting up systemd-resolved (255.4-1ubuntu8.6) ...
/proc/ is not mounted, but required for successful operation of systemd-tmpfiles. Please mount /proc/. Alternatively, consider using the --root= or --image= switches.
Setting up python3-pkg-resources (68.1.2-2ubuntu1.1) ...
Setting up systemd-sysv (255.4-1ubuntu8.6) ...
Setting up python3-apt (2.7.7ubuntu4) ...
Setting up libnss-systemd:arm64 (255.4-1ubuntu8.6) ...
Setting up netplan.io (1.1.1-1~ubuntu24.04.1) ...
Setting up libpam-systemd:arm64 (255.4-1ubuntu8.6) ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up ubuntu-pro-client (34~24.04) ...
Installing new version of config file /etc/apparmor.d/ubuntu_pro_apt_news ...
Installing new version of config file /etc/apt/apt.conf.d/20apt-esm-hook.conf ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up ubuntu-pro-client-l10n (34~24.04) ...
Setting up ubuntu-minimal (1.539.2) ...
Setting up dbus-user-session (1.14.10-4ubuntu4.1) ...
Processing triggers for libc-bin (2.39-0ubuntu8.4) ...
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  libnl-3-200 libnl-genl-3-200 libnl-route-3-200
Recommended packages:
  wireless-regdb
The following NEW packages will be installed:
  hostapd iw libnl-3-200 libnl-genl-3-200 libnl-route-3-200 xz-utils
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 1527 kB of archives.
After this operation, 4512 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libnl-3-200 arm64 3.7.0-0.3build1.1 [57.5 kB]
Get:2 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libnl-genl-3-200 arm64 3.7.0-0.3build1.1 [12.2 kB]
Get:3 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 libnl-route-3-200 arm64 3.7.0-0.3build1.1 [182 kB]
Get:4 http://ports.ubuntu.com/ubuntu-ports noble-security/universe arm64 hostapd arm64 2:2.10-21ubuntu0.2 [890 kB]
Get:5 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 xz-utils arm64 5.6.1+really5.4.5-1build0.1 [268 kB]
Get:6 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 iw arm64 6.7-1build1 [116 kB]
Fetched 1527 kB in 0s (4154 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = "en_US.UTF-8",
	LANG = "C"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)
Selecting previously unselected package libnl-3-200:arm64.
(Reading database ... 13065 files and directories currently installed.)
Preparing to unpack .../0-libnl-3-200_3.7.0-0.3build1.1_arm64.deb ...
Unpacking libnl-3-200:arm64 (3.7.0-0.3build1.1) ...
Selecting previously unselected package libnl-genl-3-200:arm64.
Preparing to unpack .../1-libnl-genl-3-200_3.7.0-0.3build1.1_arm64.deb ...
Unpacking libnl-genl-3-200:arm64 (3.7.0-0.3build1.1) ...
Selecting previously unselected package libnl-route-3-200:arm64.
Preparing to unpack .../2-libnl-route-3-200_3.7.0-0.3build1.1_arm64.deb ...
Unpacking libnl-route-3-200:arm64 (3.7.0-0.3build1.1) ...
Selecting previously unselected package hostapd.
Preparing to unpack .../3-hostapd_2%3a2.10-21ubuntu0.2_arm64.deb ...
Unpacking hostapd (2:2.10-21ubuntu0.2) ...
Selecting previously unselected package xz-utils.
Preparing to unpack .../4-xz-utils_5.6.1+really5.4.5-1build0.1_arm64.deb ...
Unpacking xz-utils (5.6.1+really5.4.5-1build0.1) ...
Selecting previously unselected package iw.
Preparing to unpack .../5-iw_6.7-1build1_arm64.deb ...
Unpacking iw (6.7-1build1) ...
Setting up xz-utils (5.6.1+really5.4.5-1build0.1) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up libnl-3-200:arm64 (3.7.0-0.3build1.1) ...
Setting up libnl-route-3-200:arm64 (3.7.0-0.3build1.1) ...
Setting up libnl-genl-3-200:arm64 (3.7.0-0.3build1.1) ...
Setting up iw (6.7-1build1) ...
Setting up hostapd (2:2.10-21ubuntu0.2) ...
⚠️ /proc/ is not mounted. This is not a supported mode of operation. Please fix
your invocation environment to mount /proc/ and /sys/ properly. Proceeding anyway.
Your mileage may vary.
Running in chroot, ignoring request.
⚠️ /proc/ is not mounted. This is not a supported mode of operation. Please fix
your invocation environment to mount /proc/ and /sys/ properly. Proceeding anyway.
Your mileage may vary.
Created symlink /etc/systemd/system/multi-user.target.wants/hostapd.service → /usr/lib/systemd/system/hostapd.service.
Processing triggers for libc-bin (2.39-0ubuntu8.4) ...
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
Hit:1 http://ports.ubuntu.com/ubuntu-ports noble InRelease
Hit:2 http://ports.ubuntu.com/ubuntu-ports noble-security InRelease
Hit:3 http://ports.ubuntu.com/ubuntu-ports noble-updates InRelease
Hit:4 http://ports.ubuntu.com/ubuntu-ports noble-backports InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  libjansson4 libnftables1 libnftnl11
Suggested packages:
  firewalld
The following NEW packages will be installed:
  libjansson4 libnftables1 libnftnl11 nftables
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 523 kB of archives.
After this operation, 1680 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libjansson4 arm64 2.14-2build2 [34.4 kB]
Get:2 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libnftnl11 arm64 1.2.6-2build1 [66.2 kB]
Get:3 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libnftables1 arm64 1.0.9-1build1 [352 kB]
Get:4 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 nftables arm64 1.0.9-1build1 [70.0 kB]
Fetched 523 kB in 0s (1679 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = "en_US.UTF-8",
	LANG = "C"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)
Selecting previously unselected package libjansson4:arm64.
(Reading database ... 13264 files and directories currently installed.)
Preparing to unpack .../libjansson4_2.14-2build2_arm64.deb ...
Unpacking libjansson4:arm64 (2.14-2build2) ...
Selecting previously unselected package libnftnl11:arm64.
Preparing to unpack .../libnftnl11_1.2.6-2build1_arm64.deb ...
Unpacking libnftnl11:arm64 (1.2.6-2build1) ...
Selecting previously unselected package libnftables1:arm64.
Preparing to unpack .../libnftables1_1.0.9-1build1_arm64.deb ...
Unpacking libnftables1:arm64 (1.0.9-1build1) ...
Selecting previously unselected package nftables.
Preparing to unpack .../nftables_1.0.9-1build1_arm64.deb ...
Unpacking nftables (1.0.9-1build1) ...
Setting up libnftnl11:arm64 (1.2.6-2build1) ...
Setting up libjansson4:arm64 (2.14-2build2) ...
Setting up libnftables1:arm64 (1.0.9-1build1) ...
Setting up nftables (1.0.9-1build1) ...
Processing triggers for libc-bin (2.39-0ubuntu8.4) ...
sending incremental file list
./
etc/
etc/hostapd/
etc/hostapd/hostapd_r4_2g4.conf
          1,909 100%    0.00kB/s    0:00:00 (xfr#1, to-chk=2/6)
etc/hostapd/hostapd_r4_5g.conf
          2,228 100%    2.12MB/s    0:00:00 (xfr#2, to-chk=1/6)
etc/hostapd/hostapd_r4_6g.conf
          2,034 100%    1.94MB/s    0:00:00 (xfr#3, to-chk=0/6)

sent 6,494 bytes  received 88 bytes  13,164.00 bytes/sec
total size is 6,171  speedup is 0.94
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
⚠️ /proc/ is not mounted. This is not a supported mode of operation. Please fix
your invocation environment to mount /proc/ and /sys/ properly. Proceeding anyway.
Your mileage may vary.
Created symlink /etc/systemd/system/dbus-org.freedesktop.network1.service → /usr/lib/systemd/system/systemd-networkd.service.
Created symlink /etc/systemd/system/multi-user.target.wants/systemd-networkd.service → /usr/lib/systemd/system/systemd-networkd.service.
Created symlink /etc/systemd/system/sockets.target.wants/systemd-networkd.socket → /usr/lib/systemd/system/systemd-networkd.socket.
Created symlink /etc/systemd/system/sysinit.target.wants/systemd-network-generator.service → /usr/lib/systemd/system/systemd-network-generator.service.
Created symlink /etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service → /usr/lib/systemd/system/systemd-networkd-wait-online.service.
hostapd
hostapd_cli
unpack hostapd to bpi-root loopdev...
total 6.8M
-rwxr-xr-x 1 root root 6.5M Jan 23 14:52 hostapd
-rwxr-xr-x 1 root root 328K Jan 23 14:52 hostapd_cli
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
copy firmware files
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  4896  100  4896    0     0  61648      0 --:--:-- --:--:-- --:--:-- 61974
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1182  100  1182    0     0  20199      0 --:--:-- --:--:-- --:--:-- 20379
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
update-alternatives: using /lib/firmware/regulatory.db-git to provide /lib/firmware/regulatory.db (regulatory.db) in auto mode
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
mnt/BPI-ROOT/lib/firmware/mediatek/mt7996/:
total 11M
-rw-r--r-- 1 root root  63K Mar 18 12:46 mt7992_dsp_23.bin
-rw-r--r-- 1 root root  63K Mar 18 12:46 mt7992_dsp.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7992_eeprom_23_2i5i.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7992_eeprom_23.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7992_eeprom_2i5e.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7992_eeprom_2i5i.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7992_eeprom.bin
-rw-r--r-- 1 root root  21K Mar 18 12:46 mt7992_rom_patch_23.bin
-rw-r--r-- 1 root root  21K Mar 18 12:46 mt7992_rom_patch.bin
-rw-r--r-- 1 root root 524K Mar 18 12:46 mt7992_wa_23.bin
-rw-r--r-- 1 root root 524K Mar 18 12:46 mt7992_wa.bin
-rw-r--r-- 1 root root 1.6M Mar 18 12:46 mt7992_wm_23.bin
-rw-r--r-- 1 root root 1.7M Mar 18 12:46 mt7992_wm.bin
-rw-r--r-- 1 root root 188K Mar 18 12:46 mt7996_dsp.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7996_eeprom_233_2i5i6i.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7996_eeprom_233.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7996_eeprom_2i5i6i.bin
-rw-r--r-- 1 root root 7.5K Mar 18 12:46 mt7996_eeprom.bin
-rw-r--r-- 1 root root  24K Mar 18 12:46 mt7996_rom_patch_233.bin
-rw-r--r-- 1 root root  24K Mar 18 12:46 mt7996_rom_patch.bin
-rw-r--r-- 1 root root 505K Mar 18 12:46 mt7996_wa_233.bin
-rw-r--r-- 1 root root 505K Mar 18 12:46 mt7996_wa.bin
-rw-r--r-- 1 root root 2.5M Mar 18 12:46 mt7996_wm_233.bin
-rw-r--r-- 1 root root 2.6M Mar 18 12:46 mt7996_wm.bin
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
systemd-resolved is already the newest version (255.4-1ubuntu8.6).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
⚠️ /proc/ is not mounted. This is not a supported mode of operation. Please fix
your invocation environment to mount /proc/ and /sys/ properly. Proceeding anyway.
Your mileage may vary.
packing bpi-r4_noble_6.13.0-main.img.gz
install it this way:
gunzip -c bpi-r4_noble_6.13.0-main.img.gz | sudo dd bs=1M status=progress conv=notrunc,fsync of=/dev/sdX

[frank-w]

Which bootled do you mean? Afaik openwrt sets a led,but imho i have not defined such...so system should be there. You can try connect pc on lan-port with dhcp enabled to check.

Better would be having uart, so please get one...

[hajoha]

Ah I thought, the B LED stands for boot and is always used to indicate boot status.

You can try connect pc on lan-port with dhcp enabled to check.

I did this already, sadly no DHCPack or discover, also interface is not blinking.

[frank-w]

Then i guess bootprocess hangs somewhere...without uart hard to find.

Possibly a ubuntu specific issue as i had no such issues with debian...tested 6.13 last time

[hajoha]

Yup looks like it

U-Boot 2024.10-bpi-g458658a92319-dirty (Jan 07 2025 - 07:01:50 +0000)

CPU:   MediaTek MT7988
Model: mt7988-rfb
DRAM:  4 GiB
Core:  50 devices, 19 uclasses, devicetree: separate
MMC:   mmc@11230000: 0
Loading Environment from nowhere... OK
In:    serial@11000000
Out:   serial@11000000
Err:   serial@11000000
=> board_late_init...
bootmedia:sd
Net:
Warning: ethernet@15100000 (eth0) using random MAC address - 16:96:12:75:10:e1
eth0: ethernet@15100000
Hit any key to stop autoboot:  0
0 bytes read in 0 ms

  *** U-Boot Boot Menu ***

      1. Enter kernel-name to boot from SD/EMMC.
      2. Boot kernel from TFTP.
      3. Boot from SD/EMMC.
      4. Boot kernel from NVME.
      Exit


  Press UP/DOWN to move, ENTER to select, ESC to quit
## Error: "initrd" not defined
PARTITION_CONFIG only exists on eMMC
sd available
bootconf=#conf-sd
fit=bpi-r4.itb
14813148 bytes read in 994 ms (14.2 MiB/s)
## Loading kernel from FIT Image at 46000000 ...
   Using 'conf-sd' configuration
   Trying 'kernel-1' kernel subimage
     Description:  Linux Kernel 6.13.0-main
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x460000e8
     Data Size:    14770329 Bytes = 14.1 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x44000000
     Entry Point:  0x44000000
     Hash algo:    sha1
     Hash value:   19f9c7e3ed36858e8047b729236138e8678e1966
   Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
   Using 'conf-sd' configuration
   Trying 'fdt-base' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x46e16280
     Data Size:    37386 Bytes = 36.5 KiB
     Architecture: AArch64
     Load Address: 0x47000000
     Hash algo:    sha1
     Hash value:   c6ccedfc99d8a7bc36b2e760ecc6ae7097dfc1bb
   Verifying Hash Integrity ... sha1+ OK
   Loading fdt from 0x46e16280 to 0x47000000
## Loading fdt from FIT Image at 46000000 ...
   Trying 'fdt-ov-sd' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x46e1f564
     Data Size:    1482 Bytes = 1.4 KiB
     Architecture: Unknown Architecture
   Verifying Hash Integrity ... OK
   Booting using the fdt blob at 0x47000000
Working FDT set to 47000000
   Uncompressing Kernel Image to 44000000
ERROR: new format image overwritten - must RESET the board to recover
Resetting the board...

[frank-w]

No it looks like your kernel image is too big for my memory map

[frank-w]

You could try using 0x48000000 as kaddr and 0x50000000 as rdaddr

https://github.com/frank-w/u-boot/blob/2024-04-bpi/uEnv_r4.txt#L13

By adding a uEnv.txt with these 2 lines in root of BPI-BOOT partition

[hajoha]

This kind of helps, but the it gets stuck at booting

Boot log

U-Boot 2024.10-bpi-g458658a92319-dirty (Jan 07 2025 - 07:01:50 +0000)

CPU:   MediaTek MT7988
Model: mt7988-rfb
DRAM:  4 GiB
Core:  50 devices, 19 uclasses, devicetree: separate
MMC:   mmc@11230000: 0
Loading Environment from nowhere... OK
In:    serial@11000000
Out:   serial@11000000
Err:   serial@11000000
=> board_late_init...
bootmedia:sd
Net:
Warning: ethernet@15100000 (eth0) using random MAC address - b6:ac:43:7d:c3:aa
eth0: ethernet@15100000
Hit any key to stop autoboot:  0
35 bytes read in 2 ms (16.6 KiB/s)

  *** U-Boot Boot Menu ***

      1. Enter kernel-name to boot from SD/EMMC.
      2. Boot kernel from TFTP.
      3. Boot from SD/EMMC.
      4. Boot kernel from NVME.
      Exit


  Press UP/DOWN to move, ENTER to select, ESC to quit
## Error: "initrd" not defined
PARTITION_CONFIG only exists on eMMC
sd available
bootconf=#conf-sd
fit=bpi-r4.itb
14813148 bytes read in 994 ms (14.2 MiB/s)
## Loading kernel from FIT Image at 48000000 ...
   Using 'conf-sd' configuration
   Trying 'kernel-1' kernel subimage
     Description:  Linux Kernel 6.13.0-main
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x480000e8
     Data Size:    14770329 Bytes = 14.1 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x44000000
     Entry Point:  0x44000000
     Hash algo:    sha1
     Hash value:   19f9c7e3ed36858e8047b729236138e8678e1966
   Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 48000000 ...
   Using 'conf-sd' configuration
   Trying 'fdt-base' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x48e16280
     Data Size:    37386 Bytes = 36.5 KiB
     Architecture: AArch64
     Load Address: 0x47000000
     Hash algo:    sha1
     Hash value:   c6ccedfc99d8a7bc36b2e760ecc6ae7097dfc1bb
   Verifying Hash Integrity ... sha1+ OK
   Loading fdt from 0x48e16280 to 0x47000000
## Loading fdt from FIT Image at 48000000 ...
   Trying 'fdt-ov-sd' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x48e1f564
     Data Size:    1482 Bytes = 1.4 KiB
     Architecture: Unknown Architecture
   Verifying Hash Integrity ... OK
   Booting using the fdt blob at 0x47000000
Working FDT set to 47000000
   Uncompressing Kernel Image to 44000000
   Loading Device Tree to 00000000ff7ea000, end 00000000ff7f64b6 ... OK
Working FDT set to ff7ea000
set /chosen/rootdisk to bootrom media: rootdisk-sd (phandle 0x00000090)

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd090]
[    0.000000] Linux version 6.13.0-main-g79e1c255f013-dirty (haa@ngni-t14-j33) (aarch64-linux-gnu-gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #7 SMP PREEMPT Fri Mar 14 16:59:32 CET 2025
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: Banana Pi BPI-R4
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000011000000 (options '')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004304ffff (320 KiB) nomap non-reusable secmon@43000000
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13f7ccd00-0x13f7cf33f]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004304ffff]
[    0.000000]   node   0: [mem 0x0000000043050000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[    0.000000] cma: Reserved 32 MiB at 0x00000000fd600000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] percpu: Embedded 25 pages/cpu s61528 r8192 d32680 u102400
[    0.000000] pcpu-alloc: s61528 r8192 d32680 u102400 alloc=25*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: detected: ARM erratum 858921
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: board=bpi-r4 console=ttyS0,115200n1 earlycon=uart8250,mmio32,0x11000000 root=/dev/mmcblk0p6 rootfstype=ext4 rootwait debug=7
[    0.000000] Unknown kernel command line parameters "board=bpi-r4", will be passed to user space.
[    0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1048576
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000f9600000-0x00000000fd600000] (64MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 416 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.000000] arch_timer: CPU0: Trapping CNTVCT access
[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[    0.008776] Console: colour dummy device 80x25
[    0.013333] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000)
[    0.023731] pid_max: default: 32768 minimum: 301
[    0.028442] LSM: initializing lsm=capability
[    0.032835] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.040333] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.048794] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.055497] rcu: Hierarchical SRCU implementation.
[    0.060353] rcu: 	Max phase no-delay instances is 1000.
[    0.065745] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.075074] EFI services will not be available.
[    0.079777] smp: Bringing up secondary CPUs ...
[    0.084621] Detected VIPT I-cache on CPU1
[    0.084664] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[    0.084673] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.084688] arch_timer: CPU1: Trapping CNTVCT access
[    0.084696] CPU1: Booted secondary processor 0x0000000001 [0x411fd090]
[    0.085022] Detected VIPT I-cache on CPU2
[    0.085046] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[    0.085052] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.085059] arch_timer: CPU2: Trapping CNTVCT access
[    0.085064] CPU2: Booted secondary processor 0x0000000002 [0x411fd090]
[    0.085357] Detected VIPT I-cache on CPU3
[    0.085380] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[    0.085386] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.085392] arch_timer: CPU3: Trapping CNTVCT access
[    0.085397] CPU3: Booted secondary processor 0x0000000003 [0x411fd090]
[    0.085460] smp: Brought up 1 node, 4 CPUs
[    0.177900] SMP: Total of 4 processors activated.
[    0.182661] CPU: All CPU(s) started at EL2
[    0.186828] CPU features: detected: 32-bit EL0 Support
[    0.192032] CPU features: detected: 32-bit EL1 Support
[    0.197237] CPU features: detected: CRC32 instructions
[    0.202464] alternatives: applying system-wide alternatives
[    0.208749] Memory: 3962600K/4194304K available (17664K kernel code, 4900K rwdata, 12044K rodata, 10560K init, 749K bss, 194392K reserved, 32768K cma-reserved)
[    0.223926] devtmpfs: initialized
[    0.230523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.240426] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.247710] 21216 pages in range for non-PLT usage
[    0.247715] 512736 pages in range for PLT usage
[    0.252680] pinctrl core: initialized pinctrl subsystem
[    0.263610] DMI not present or invalid.
[    0.268851] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.275424] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.282711] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.290721] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.298770] audit: initializing netlink subsys (disabled)
[    0.304325] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1
[    0.305039] thermal_sys: Registered thermal governor 'step_wise'
[    0.312172] thermal_sys: Registered thermal governor 'power_allocator'
[    0.318294] cpuidle: using governor menu
[    0.328977] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.335895] ASID allocator initialised with 65536 entries
[    0.342433] Serial: AMBA PL011 UART driver
[    0.350188] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
[    0.366730] /soc/pcie@11280000: Fixed dependency cycle(s) with /soc/pcie@11280000/interrupt-controller
[    0.376411] /soc/pcie@11290000: Fixed dependency cycle(s) with /soc/pcie@11290000/interrupt-controller
[    0.386065] /soc/pcie@11300000: Fixed dependency cycle(s) with /soc/pcie@11300000/interrupt-controller
[    0.395726] /soc/pcie@11310000: Fixed dependency cycle(s) with /soc/pcie@11310000/interrupt-controller
[    0.408536] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.415427] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.421822] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.428699] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.435049] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.441922] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.448268] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.455138] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.462473] ACPI: Interpreter disabled.
[    0.467656] iommu: Default domain type: Translated
[    0.472516] iommu: DMA domain TLB invalidation policy: strict mode
[    0.478957] SCSI subsystem initialized
[    0.482811] libata version 3.00 loaded.
[    0.486785] usbcore: registered new interface driver usbfs
[    0.492358] usbcore: registered new interface driver hub
[    0.497751] usbcore: registered new device driver usb
[    0.503334] pps_core: LinuxPPS API ver. 1 registered
[    0.508360] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.517612] PTP clock support registered
[    0.521632] EDAC MC: Ver: 3.0.0
[    0.525015] scmi_core: SCMI protocol bus registered
[    0.530748] FPGA manager framework
[    0.534243] Advanced Linux Sound Architecture Driver Initialized.
[    0.540918] vgaarb: loaded
[    0.543863] clocksource: Switched to clocksource arch_sys_counter
[    0.550174] VFS: Disk quotas dquot_6.6.0
[    0.554157] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.561234] pnp: PnP ACPI: disabled
[    0.568020] NET: Registered PF_INET protocol family
[    0.573106] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.582513] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.591197] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.599057] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.607172] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.615068] TCP: Hash tables configured (established 32768 bind 32768)
[    0.621783] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.628776] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.636284] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.642326] RPC: Registered named UNIX socket transport module.
[    0.648329] RPC: Registered udp transport module.
[    0.653096] RPC: Registered tcp transport module.
[    0.657856] RPC: Registered tcp-with-tls transport module.
[    0.663407] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.669930] NET: Registered PF_XDP protocol family
[    0.674792] PCI: CLS 0 bytes, default 64
[    0.680912] kvm [1]: nv: 557 coarse grained trap handlers
[    0.686612] kvm [1]: IPA Size Limit: 40 bits
[    0.691941] kvm [1]: vgic-v2@c420000
[    0.695575] kvm [1]: GIC system register CPU interface enabled
[    0.701502] kvm [1]: vgic interrupt IRQ9
[    0.705490] kvm [1]: Hyp nVHE mode initialized successfully
[    0.712050] Initialise system trusted keyrings
[    0.716699] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[    0.723391] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.729426] NFS: Registering the id_resolver key type
[    0.734554] Key type id_resolver registered
[    0.738787] Key type id_legacy registered
[    0.742855] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.749641] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.757197] 9p: Installing v9fs 9p2000 file system support
[    0.790740] Key type asymmetric registered
[    0.794888] Asymmetric key parser 'x509' registered
[    0.799862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.807353] io scheduler mq-deadline registered
[    0.811944] io scheduler kyber registered
[    0.816022] io scheduler bfq registered
[    0.826560] ledtrig-cpu: registered to indicate activity on CPUs
[    0.832752] pciehp: pcie_port_service_register = 0
[    0.852594] mtk-socinfo mtk-socinfo.0.auto: error -ENOENT: Failed to get socinfo data
[    0.860562] mtk-socinfo mtk-socinfo.0.auto: probe with driver mtk-socinfo failed with error -2
[    0.874850] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.882784] printk: legacy console [ttyS0] disabled
[    0.907982] 11000000.serial: ttyS0 at MMIO 0x11000000 (irq = 99, base_baud = 2500000) is a ST16650V2
[    0.917276] printk: legacy console [ttyS0] enabled
[    0.917276] printk: legacy console [ttyS0] enabled
[    0.926884] printk: legacy bootconsole [uart8250] disabled
[    0.926884] printk: legacy bootconsole [uart8250] disabled
[    0.940806] msm_serial: driver initialized
[    0.945121] SuperH (H)SCI(F) driver initialized
[    0.949752] STM32 USART driver initialized
[    0.958210] loop: module loaded
[    0.962129] megasas: 07.727.03.00-rc1
[    0.970213] tun: Universal TUN/TAP device driver, 1.6
[    0.975940] thunder_xcv, ver 1.0
[    0.979170] thunder_bgx, ver 1.0
[    0.982403] nicpf, ver 1.0
[    0.985820] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    0.993040] hns3: Copyright (c) 2017 Huawei Corporation.
[    0.998358] hclge is initializing
[    1.001685] e1000: Intel(R) PRO/1000 Network Driver
[    1.006554] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.012299] e1000e: Intel(R) PRO/1000 Network Driver
[    1.017253] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.023173] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.028563] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.034133] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    1.040389] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.046491] sky2: driver version 1.30
[    1.051012] VFIO - User Level meta-driver version: 0.3
[    1.057976] usbcore: registered new interface driver usb-storage
[    1.065888] i2c_dev: i2c /dev entries driver
[    1.070966] /soc/i2c@11003000/rt5190a@64: Fixed dependency cycle(s) with /soc/i2c@11003000/rt5190a@64/regulators/buck1
[    1.083465] pca954x 2-0070: supply vdd not found, using dummy regulator
[    1.093111] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[    1.103336] sdhci: Secure Digital Host Controller Interface driver
[    1.109559] sdhci: Copyright(c) Pierre Ossman
[    1.114506] Synopsys Designware Multimedia Card Interface Driver
[    1.114544] mtk-msdc 11230000.mmc: Got CD GPIO
[    1.121136] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.132267] SMCCC: SOC_ID: ID = jep106:0426:7988 Revision = 0x00000000
[    1.139339] usbcore: registered new interface driver usbhid
[    1.144912] usbhid: USB HID core driver
[    1.150922] hw perfevents: enabled with armv8_cortex_a73 PMU driver, 7 (0,8000003f) counters available
[    1.160289] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002
[    1.169452] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002
[    1.181965] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[    1.182346] NET: Registered PF_PACKET protocol family
[    1.191473] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[    1.205028] 9pnet: Installing 9P2000 support
[    1.205475] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[    1.209339] Key type dns_resolver registered
[    1.218772] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[    1.227110] registered taskstats version 1
[    1.235596] Loading compiled-in X.509 certificates
[    1.243927] Demotion targets for Node 0: null
[    1.258401] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
[    1.265823] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator
[    1.273840] xhci-mtk 11200000.usb: xHCI Host Controller
[    1.277864] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.279074] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[    1.288971] mmc0: new high speed SDHC card at address 59b4
[    1.297417] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[    1.300478] mmcblk0: mmc0:59b4 USD   15.0 GiB
[    1.309075] xhci-mtk 11200000.usb: irq 107, io mem 0x11200000
[    1.319221] xhci-mtk 11200000.usb: xHCI Host Controller
[    1.320370] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    1.324453] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[    1.331834] GPT:15269887 != 31422463
[    1.339225] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[    1.342777] GPT:Alternate GPT header not at the end of the disk.
[    1.342780] GPT:15269887 != 31422463
[    1.350182] hub 1-0:1.0: USB hub found
[    1.355807] GPT: Use GNU Parted to correct GPT errors.
[    1.355824]  mmcblk0: p1 p2 p3 p4 p5 p6
[    1.359387] hub 1-0:1.0: 1 port detected
[    1.376145] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.384455] hub 2-0:1.0: USB hub found
[    1.388211] hub 2-0:1.0: 1 port detected
[    1.392388] pca954x 2-0070: supply vdd not found, using dummy regulator
[    1.399824] pca954x 2-0070: supply vdd not found, using dummy regulator
[    1.407435] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.414575] pca954x 2-0070: supply vdd not found, using dummy regulator
[    1.414617] clk: Disabling unused clocks
[    1.425815] PM: genpd: Disabling unused power domains
[    1.430878] ALSA device list:
[    1.433849]   No soundcards found.
[    1.461723] EXT4-fs (mmcblk0p6): INFO: recovery required on readonly filesystem
[    1.469049] EXT4-fs (mmcblk0p6): write access will be enabled during recovery
[    1.783874] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[    1.910869] EXT4-fs (mmcblk0p6): recovery complete
[    1.924704] EXT4-fs (mmcblk0p6): mounted filesystem 2cddfd73-abb7-432e-8351-6f30ceafa8ac ro with ordered data mode. Quota mode: none.
[    1.926412] hub 1-1:1.0: USB hub found
[    1.936820] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
[    1.940704] hub 1-1:1.0: 5 ports detected
[    1.950030] devtmpfs: mounted
[    1.956645] Freeing unused kernel memory: 10560K
[    1.961357] Run /sbin/init as init process
[    1.965451]   with arguments:
[    1.968413]     /sbin/init
[    1.971107]   with environment:
[    1.974238]     HOME=/
[    1.976590]     TERM=linux
[    1.979283]     board=bpi-r4
[    2.073016] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[    2.073213] pca954x 2-0070: supply vdd not found, using dummy regulator
[    2.094548] hub 2-1:1.0: USB hub found
[    2.098448] hub 2-1:1.0: 4 ports detected
[    2.103986] pca954x 2-0070: supply vdd not found, using dummy regulator
[    2.627876] usb 1-1.5: new high-speed USB device number 3 using xhci-mtk
[    2.639085] systemd[1]: System time before build time, advancing clock.
[    2.713651] systemd[1]: systemd 255.4-1ubuntu8.6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    2.721644] pca954x 2-0070: supply vdd not found, using dummy regulator
[    2.746322] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 24.04.2 LTS!

[    2.772555] systemd[1]: Hostname set to <bpi-r4>.
[    3.569192] systemd[1]: Queued start job for default target graphical.target.
[    3.606337] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[  OK  ] Created slice system-modprobe.slice - Slice /system/modprobe.
[    3.628868] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[  OK  ] Created slice system-serial\x2dget…slice - Slice /system/serial-getty.
[    3.652560] systemd[1]: Created slice user.slice - User and Session Slice.
[  OK  ] Created slice user.slice - User and Session Slice.
[    3.672104] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started systemd-ask-password-conso…equests to Console Directory Watch.
[    3.696047] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[  OK  ] Started systemd-ask-password-wall.…d Requests to Wall Directory Watch.
[    3.720059] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[    3.739405] systemd[1]: Expecting device dev-mmcblk0p5.device - /dev/mmcblk0p5...
         Expecting device dev-mmcblk0p5.device - /dev/mmcblk0p5...
[    3.759917] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
         Expecting device dev-ttyS0.device - /dev/ttyS0...
[    3.779948] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[  OK  ] Reached target cryptsetup.target - Local Encrypted Volumes.
[    3.799956] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[  OK  ] Reached target integritysetup.targ… Local Integrity Protected Volumes.
[    3.823974] systemd[1]: Reached target paths.target - Path Units.
[  OK  ] Reached target paths.target - Path Units.
[    3.839952] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[  OK  ] Reached target remote-fs.target - Remote File Systems.
[    3.859936] systemd[1]: Reached target slices.target - Slice Units.
[  OK  ] Reached target slices.target - Slice Units.
[    3.875948] systemd[1]: Reached target swap.target - Swaps.
[  OK  ] Reached target swap.target - Swaps.
[    3.891970] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[  OK  ] Reached target veritysetup.target - Local Verity Protected Volumes.
[    3.916411] systemd[1]: Listening on syslog.socket - Syslog Socket.
[  OK  ] Listening on syslog.socket - Syslog Socket.
[    3.936093] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[  OK  ] Listening on systemd-initctl.socke…- initctl Compatibility Named Pipe.
[    3.960226] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[  OK  ] Listening on systemd-journald-dev-…socket - Journal Socket (/dev/log).
[    3.984248] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[  OK  ] Listening on systemd-journald.socket - Journal Socket.
[    4.004355] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
[  OK  ] Listening on systemd-networkd.socket - Network Service Netlink Socket.
[    4.027968] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.044060] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[  OK  ] Listening on systemd-udevd-control.socket - udev Control Socket.
[    4.068217] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[  OK  ] Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    4.128075] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
         Mounting dev-hugepages.mount - Huge Pages File System...
[    4.150142] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
         Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    4.174178] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
         Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    4.196239] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[    4.215356] systemd[1]: Starting systemd-journald.service - Journal Service...
         Starting systemd-journald.service - Journal Service...
[    4.238428] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
         Starting keyboard-setup.service - Set the console keyboard layout...
[    4.260016] systemd[1]: kmod-static-nodes.service - Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.13.0-main-g79e1c255f013-dirty/modules.devname).
[    4.282356] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
         Starting modprobe@configfs.service - Load Kernel Module configfs...
[    4.306632] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    4.308614] systemd-journald[104]: Collecting audit messages is disabled.
         Starting modprobe@dm_mod.servi[    4.324381] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
ce - Load Kernel Module dm_mod...
         Starting modprobe@drm.service - Load Kerne[    4.352343] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
l Module drm...
         Starting modprobe@efi_pstore.servi… - Load Kernel Module efi_pstore...
[    4.390603] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
         Starting modprobe@fuse.service - Load Kernel Module fuse...
[    4.432280] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
         Starting modprobe@loop.service - Load Kernel Module loop...
[    4.456029] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
[    4.476907] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
         Starting systemd-modules-load.service - Load Kernel Modules...
[    4.506330] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
         Startin[    4.517383] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
g systemd-network-gener[    4.535966] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
ator…k units from Kernel command line...
         Starting syste[    4.558372] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
md-remount-fs.servic…unt Root and Kernel File Systems...
         Startin[    4.580328] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
g systemd-tmpfiles-setup-de… Devi[    4.599158] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
ce Nodes in /dev gracefully...
         Starting systemd-udev-trigger.[    4.619970] systemd[1]: Started systemd-journald.service - Journal Service.
service - Co[    4.624225] EXT4-fs (mmcblk0p6): warning: mounting fs with errors, running e2fsck is recommended
ldplug All udev Devices...
[    4.640803] EXT4-fs (mmcblk0p6): re-mounted 2cddfd73-abb7-432e-8351-6f30ceafa8ac r/w. Quota mode: none.
[  OK  ] Started systemd-journald.service - Journal Service.
[  OK  ] Mounted dev-hugepages.mount - Huge Pages File System.
[  OK  ] Mounted dev-mqueue.mount - POSIX Message Queue File System.
[  OK  ] Mounted sys-kernel-debug.mount - Kernel Debug File System.
[  OK  ] Finished keyboard-setup.service - Set the console keyboard layout.
[  OK  ] Finished modprobe@configfs.service - Load Kernel Module configfs.
[  OK  ] Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[  OK  ] Finished modprobe@drm.service - Load Kernel Module drm.
[  OK  ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[  OK  ] Finished modprobe@fuse.service - Load Kernel Module fuse.
[  OK  ] Finished modprobe@loop.service - Load Kernel Module loop.
[  OK  ] Finished systemd-modules-load.service - Load Kernel Modules.
[  OK  ] Finished systemd-network-generator…ork units from Kernel command line.
[  OK  ] Finished systemd-remount-fs.servic…mount Root and Kernel File Systems.
[  OK  ] Reached target network-pre.target - Preparation for Network.
         Mounting sys-kernel-config.mount - Kernel Configuration File System...
         Starting systemd-journal-flush.ser…sh Journal to Persistent Storage...
         Starting systemd-random-seed.service - Load/Save OS Random Seed...
[    4.983019] systemd-journald[104]: Received client request to flush runtime journal.
         Starting systemd-sysctl.service - Apply Kernel Variables...
[  OK  ] Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    5.024883] systemd-journald[104]: File /var/log/journal/573c2e809ad349d1979a72006a965d27/system.journal corrupted or uncleanly shut down, renaming and replacing.
[  OK  ] Finished systemd-tmpfiles-setup-de…ic Device Nodes in /dev gracefully.
         Starting systemd-tmpfiles-setup-de…eate Static Device Nodes in /dev...
[  OK  ] Finished systemd-sysctl.service - Apply Kernel Variables.
[  OK  ] Finished systemd-tmpfiles-setup-de…Create Static Device Nodes in /dev.
[  OK  ] Reached target local-fs-pre.target…Preparation for Local File Systems.
         Starting systemd-udevd.service - R…ager for Device Events and Files...
[  OK  ] Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[  OK  ] Finished systemd-journal-flush.ser…lush Journal to Persistent Storage.
[  OK  ] Started systemd-udevd.service - Ru…anager for Device Events and Files.
         Starting systemd-networkd.service - Network Configuration...
[  OK  ] Found device dev-ttyS0.device - /dev/ttyS0.
[  OK  ] Started systemd-networkd.service - Network Configuration.
[  OK  ] Found device dev-mmcblk0p5.device - /dev/mmcblk0p5.
         Mounting boot.mount - /boot...
[  OK  ] Mounted boot.mount - /boot.
[  OK  ] Reached target local-fs.target - Local File Systems.
[  OK  ] Listening on systemd-sysext.socket…tension Image Management (Varlink).
         Starting console-setup.service - Set console font and keymap...
         Starting systemd-tmpfiles-setup.se…e Volatile Files and Directories...
[  OK  ] Finished console-setup.service - Set console font and keymap.
[  OK  ] Finished systemd-tmpfiles-setup.se…ate Volatile Files and Directories.
         Starting systemd-resolved.service - Network Name Resolution...
         Starting systemd-timesyncd.service - Network Time Synchronization...
         Starting systemd-update-utmp.servi…ord System Boot/Shutdown in UTMP...
[  OK  ] Finished systemd-random-seed.service - Load/Save OS Random Seed.
[  OK  ] Started systemd-timesyncd.service - Network Time Synchronization.
[  OK  ] Finished systemd-update-utmp.servi…ecord System Boot/Shutdown in UTMP.
[  OK  ] Reached target time-set.target - System Time Set.
[  OK  ] Started systemd-resolved.service - Network Name Resolution.
[  OK  ] Reached target network.target - Network.
[  OK  ] Reached target nss-lookup.target - Host and Network Name Lookups.
[  OK  ] Reached target sysinit.target - System Initialization.
[  OK  ] Started apt-daily.timer - Daily apt download activities.
[  OK  ] Started apt-daily-upgrade.timer - …y apt upgrade and clean activities.
[  OK  ] Started dpkg-db-backup.timer - Daily dpkg database backup timer.
[  OK  ] Started e2scrub_all.timer - Period…Metadata Check for All Filesystems.

Also it shows this error

## Error: "initrd" not defined

My current uENV.txt

kaddr=0x48000000
rdaddr=0x50000000

[frank-w]

But your kernel is now booting...you can ignore the initrd error (it is from check if the var is set - optional).

Now it looks like ubuntu specific issue where the login terminal is not started

[hajoha]

Any idea why?

[hajoha]

Okay using 6.12.17-bpi-r4-main works just fine.

[frank-w]

With same defconfig or with my basic config?

[hajoha]

with the basic config

[frank-w]

mhm, so 6.12 works and 6.13 not...problem looks like uart takeover does not work...i noticed something like this with my debian and afair i added a symlink to make sure system takes this serial device for output...but console was printed over bootlog (needed clear command to get readable)

[frank-w]

verfied dts between 6.12 and 6.13, except serial name change there is no difference....stdout-path is still set, only uart0 is renamed to serial0 because of mainline-requirements and should not break userspace