WIRE-POD/VECTOR CONFIGURATION/Face Manager - missing option to "Add a new face"
Procedure
- Access "Wire-pod Configuration" page via VectorX console (@ escapepod.local:8070) or directly @escapepod.local:8080)
- WIRE-POD INTERFACE/Bot Settings/Face Manager --> bottom of page should have a section to "Add a new face" - this is missing. See image below for details.
Expected behavior
The Face Manager interface should have an option to "Add a new face". After inputing a Face name and clicking "Add Face" this sends a signal to Vector Bot to scan visually for a face to register, it should confirm by announcing the name registered.
This whole section is missing from the fforchino/Vectorx installation-Face Manager interface. You can only Delete and Refresh the list, but you cannot add a new name and initiate the Vector bot facial recognition sequence.
It works with the Kercre123/Wire-pod installation BUT not with the ffforchino/VectorX installation. I have confirmed on 3 different computers, with different web browsers, cleared cache, cleared history, all to no avail.
Screenshots
Device you are running wire-pod on:
- OS: [Raspberry Pi OS 64bit - full install] --> kercre123/wire-pod install --> Face Manager working
- OS: [Raspberry Pi OS 64bit-lite]--> Forchino/vectorx easy install image --> Face Manager not working
- Hardware: [Raspberry Pi4B 4GB model]
- Vector Bot OS v2.0.1.607ep: [kercre123/wire-pod onboarding https://wpsetup.keriganc.com/ will install v2.0.1.607ep]
- Vector Bot OS v1.8.1.6051: [fforchino/vectorx onboarding https://keriganc.com/vector-epod-setup/html/main.html will install v1.8.1.6051
Additional context
there are two different on-boarding links that install different Vector Bot OS versions... I assume the newer version is the better version. In any event this does not affect the Face Manager Issue.
WIRE-POD/VECTOR CONFIGURATION/Face Manager - missing option to "Add a new face"
Procedure
Expected behavior
The Face Manager interface should have an option to "Add a new face". After inputing a Face name and clicking "Add Face" this sends a signal to Vector Bot to scan visually for a face to register, it should confirm by announcing the name registered.
This whole section is missing from the fforchino/Vectorx installation-Face Manager interface. You can only Delete and Refresh the list, but you cannot add a new name and initiate the Vector bot facial recognition sequence.
It works with the Kercre123/Wire-pod installation BUT not with the ffforchino/VectorX installation. I have confirmed on 3 different computers, with different web browsers, cleared cache, cleared history, all to no avail.
Screenshots
Device you are running wire-pod on:
Additional context
there are two different on-boarding links that install different Vector Bot OS versions... I assume the newer version is the better version. In any event this does not affect the Face Manager Issue.