Plot trajectories from one channel

[greydongilmore]

Excellent toolbox!

I wanted to use this interface for intraoperative purposes. Currently, we record at various depths from multiple microelectrodes on the way to the surgical target. Each depth recording is 10 seconds in length. We start 10mm above target and stop every 0.5mm on the way to the target, ~ 20 depths are recorded. Is it possible to plot all the depth recordings from one channel per figure?

[ebakstein]

Thanks and sorry for overlooking the issue - just noticed it now, there should be more updates to the toolbox in the upcoming weeks as we prepare the toolbox for publication.

Currently, the toolbox is intended to show signals from a single recording position at once - possibly multiple channels (e.g. 5 from the ben-gun configuration as used at our lab). There is a limit of 9 channels more channels and corresponding tick boxes etc. do not fit on a regular screen.

So far, I did not consider plotting multiple recording positions at once as this would probably require separate figure/window: the main window shows always concurrent parallel channels: all samples shown at the same x-axis value are recorded at the same time, which is handy e.g. for movement artifacts, affecting the whole frame with all trajectories