EmbeddedProcessor/PinNames.h at master · devnjw/EmbeddedProcessor · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
/* mbed Microcontroller Library
 * SPDX-License-Identifier: BSD-3-Clause
 ******************************************************************************
 *
 * Copyright (c) 2016-2021 STMicroelectronics.
 * All rights reserved.
 *
 * This software component is licensed by ST under BSD 3-Clause license,
 * the "License"; You may not use this file except in compliance with the
 * License. You may obtain a copy of the License at:
 *                        opensource.org/licenses/BSD-3-Clause
 *
 ******************************************************************************
 *
 * Automatically generated from STM32CubeMX/db/mcu/STM32F411R(C-E)Tx.xml
 */

/* MBED TARGET LIST: NUCLEO_F411RE */

#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"
#include "PinNamesTypes.h"

#ifdef __cplusplus
extern "C" {
#endif

/* If this macro is defined, then constexpr utility functions for pin-map seach can be used. */
#define STATIC_PINMAP_READY 1

typedef enum {
    ALT0  = 0x100,
} ALTx;

typedef enum {
    PA_0       = 0x00,
    PA_1       = 0x01,
    PA_2       = 0x02,
    PA_3       = 0x03,
    PA_4       = 0x04,
    PA_4_ALT0  = PA_4  | ALT0, // same pin used for alternate HW
    PA_5       = 0x05,
    PA_6       = 0x06,
    PA_7       = 0x07,
    PA_7_ALT0  = PA_7  | ALT0, // same pin used for alternate HW
    PA_8       = 0x08,
    PA_9       = 0x09,
    PA_10      = 0x0A,
    PA_11      = 0x0B,
    PA_12      = 0x0C,
    PA_13      = 0x0D,
    PA_14      = 0x0E,
    PA_15      = 0x0F,
    PA_15_ALT0 = PA_15 | ALT0, // same pin used for alternate HW
    PB_0       = 0x10,
    PB_0_ALT0  = PB_0  | ALT0, // same pin used for alternate HW
    PB_1       = 0x11,
    PB_1_ALT0  = PB_1  | ALT0, // same pin used for alternate HW
    PB_2       = 0x12,
    PB_3       = 0x13,
    PB_3_ALT0  = PB_3  | ALT0, // same pin used for alternate HW
    PB_4       = 0x14,
    PB_4_ALT0  = PB_4  | ALT0, // same pin used for alternate HW
    PB_5       = 0x15,
    PB_5_ALT0  = PB_5  | ALT0, // same pin used for alternate HW
    PB_6       = 0x16,
    PB_7       = 0x17,
    PB_8       = 0x18,
    PB_8_ALT0  = PB_8  | ALT0, // same pin used for alternate HW
    PB_9       = 0x19,
    PB_9_ALT0  = PB_9  | ALT0, // same pin used for alternate HW
    PB_10      = 0x1A,
    PB_12      = 0x1C,
    PB_12_ALT0 = PB_12 | ALT0, // same pin used for alternate HW
    PB_13      = 0x1D,
    PB_13_ALT0 = PB_13 | ALT0, // same pin used for alternate HW
    PB_14      = 0x1E,
    PB_15      = 0x1F,
    PC_0       = 0x20,
    PC_1       = 0x21,
    PC_2       = 0x22,
    PC_3       = 0x23,
    PC_4       = 0x24,
    PC_5       = 0x25,
    PC_6       = 0x26,
    PC_7       = 0x27,
    PC_8       = 0x28,
    PC_9       = 0x29,
    PC_10      = 0x2A,
    PC_11      = 0x2B,
    PC_12      = 0x2C,
    PC_13      = 0x2D,
    PC_14      = 0x2E,
    PC_15      = 0x2F,
    PD_2       = 0x32,
    PH_0       = 0x70,
    PH_1       = 0x71,

    /**** ADC internal channels ****/

    ADC_TEMP = 0xF0, // Internal pin virtual value
    ADC_VREF = 0xF1, // Internal pin virtual value
    ADC_VBAT = 0xF2, // Internal pin virtual value

#ifdef TARGET_FF_ARDUINO_UNO
    // Arduino Uno (Rev3) pins
    ARDUINO_UNO_A0  = PA_0,
    ARDUINO_UNO_A1  = PA_1,
    ARDUINO_UNO_A2  = PA_4,
    ARDUINO_UNO_A3  = PB_0,
    ARDUINO_UNO_A4  = PC_1,
    ARDUINO_UNO_A5  = PC_0,

    ARDUINO_UNO_D0  = PA_3,
    ARDUINO_UNO_D1  = PA_2,
    ARDUINO_UNO_D2  = PA_10,
    ARDUINO_UNO_D3  = PB_3,
    ARDUINO_UNO_D4  = PB_5,
    ARDUINO_UNO_D5  = PB_4,
    ARDUINO_UNO_D6  = PB_10,
    ARDUINO_UNO_D7  = PA_8,
    ARDUINO_UNO_D8  = PA_9,
    ARDUINO_UNO_D9  = PC_7,
    ARDUINO_UNO_D10 = PB_6,
    ARDUINO_UNO_D11 = PA_7,
    ARDUINO_UNO_D12 = PA_6,
    ARDUINO_UNO_D13 = PA_5,
    ARDUINO_UNO_D14 = PB_9,
    ARDUINO_UNO_D15 = PB_8,
#endif

    // STDIO for console print
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
    CONSOLE_TX = MBED_CONF_TARGET_STDIO_UART_TX,
#else
    CONSOLE_TX = PA_2,
#endif
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
    CONSOLE_RX = MBED_CONF_TARGET_STDIO_UART_RX,
#else
    CONSOLE_RX = PA_3,
#endif

    /**** USB FS pins ****/
    USB_OTG_FS_DM = PA_11,
    USB_OTG_FS_DP = PA_12,
    USB_OTG_FS_ID = PA_10,
    USB_OTG_FS_SOF = PA_8,
    USB_OTG_FS_VBUS = PA_9,

    /**** OSCILLATOR pins ****/
    RCC_OSC32_IN = PC_14,
    RCC_OSC32_OUT = PC_15,
    RCC_OSC_IN = PH_0,
    RCC_OSC_OUT = PH_1,

    /**** DEBUG pins ****/
    SYS_JTCK_SWCLK = PA_14,
    SYS_JTDI = PA_15,
    SYS_JTDO_SWO = PB_3,
    SYS_JTMS_SWDIO = PA_13,
    SYS_JTRST = PB_4,
    SYS_WKUP = PA_0,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

// Standardized LED and button names
#define LED1     PA_5   // LD2 [Green Led]
#define BUTTON1  PC_13  // B1 [Blue PushButton]

#ifdef __cplusplus
}
#endif

#endif