English | 中文简体
``` Since the source code could not be taken out of the hard disk, I had to do it again. , At present, only 70% of the reconstruction progress is used on the closed source of this mirror. Try to deal with it later. The following things have been updated this month.
Samsung TF card\Haikang TF card is strongly recommended. Even if the firmware is difficult to flash, only Samsung flashes it to boot.
Note: Do not use to restore the backup. . There is no guarantee that a certain plug-in will work properly. . . It is recommended to reset the thief! ! !
This month I have been begging without a computer (please be in the computer~). . .
-Username: root Password: password Management IP: 192.168.2.1
-Download link: https://github.com/DHDAXCW/NanoPi-R2S-2021/releases -Telegram group: https://t.me/DHDAXCW
If you think this project is helpful to you, you can donate to us to encourage the sustainable development and perfection of the project
-My firmware has added dynamic overclocking. Whether it is hot or not, it depends on what the background program is running. -If it feels very hot, add a fan. It is recommended that the fan is 6cm×6cm, thinner 1cm, USB is also OK, or terminal cable zh1.5
-Added virtual memory -Fix missing dependencies cause compilation and installation failure -Solve the NTA Type test as FullCone -Added Ali ddns -Solve the problem of getting in the background -Optimized to improve the stability of the system -Optimized to improve background running fast -Perfectly solve the problem of passwall blindness -Return to multi-pull, load balance -Add multiple network card drivers -Kernel version update 5.4.115 -Try to remove the overclocking and change to the official default frequency -Try to remove a plug-in kernel module to prevent the kernel from crashing -Optimized to improve the stability of the system -Optimized to improve background running fast