xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.

BugLink: https://bugs.launchpad.net/bugs/2115252

commit cab63934c33b12c0d1e9f4da7450928057f2c142 upstream.

Event polling delay is set to 0 if there are any pending requests in
either rx or tx requests lists. Checking for pending requests does
not work well for "IN" transfers as the tty driver always queues
requests to the list and TRBs to the ring, preparing to receive data
from the host.

This causes unnecessary busylooping and cpu hogging.

Only set the event polling delay to 0 if there are pending tx "write"
transfers, or if it was less than 10ms since last active data transfer
in any direction.

Cc: Łukasz Bartosik <ukaszb@chromium.org>
Fixes: fb18e5b ("xhci: dbc: poll at different rate depending on data transfer activity")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250505125630.561699-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

Author: matnyman

drivers/usb/host/xhci-dbgcap.c

@@ -823,6 +823,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
 {
 	dma_addr_t		deq;
 	union xhci_trb		*evt;
+	enum evtreturn		ret = EVT_DONE;
 	u32			ctrl, portsc;
 	bool			update_erdp = false;
 
@@ -909,6 +910,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
 			break;
 		case TRB_TYPE(TRB_TRANSFER):
 			dbc_handle_xfer_event(dbc, evt);
+			ret = EVT_XFER_DONE;
 			break;
 		default:
 			break;
@@ -927,7 +929,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
 		lo_hi_writeq(deq, &dbc->regs->erdp);
 	}
 
-	return EVT_DONE;
+	return ret;
 }
 
 static void xhci_dbc_handle_events(struct work_struct *work)
@@ -936,6 +938,7 @@ static void xhci_dbc_handle_events(struct work_struct *work)
 	struct xhci_dbc		*dbc;
 	unsigned long		flags;
 	unsigned int		poll_interval;
+	unsigned long		busypoll_timelimit;
 
 	dbc = container_of(to_delayed_work(work), struct xhci_dbc, event_work);
 	poll_interval = dbc->poll_interval;
@@ -954,11 +957,21 @@ static void xhci_dbc_handle_events(struct work_struct *work)
 			dbc->driver->disconnect(dbc);
 		break;
 	case EVT_DONE:
-		/* set fast poll rate if there are pending data transfers */
+		/*
+		 * Set fast poll rate if there are pending out transfers, or
+		 * a transfer was recently processed
+		 */
+		busypoll_timelimit = dbc->xfer_timestamp +
+			msecs_to_jiffies(DBC_XFER_INACTIVITY_TIMEOUT);
+
 		if (!list_empty(&dbc->eps[BULK_OUT].list_pending) ||
-		    !list_empty(&dbc->eps[BULK_IN].list_pending))
+		    time_is_after_jiffies(busypoll_timelimit))
 			poll_interval = 0;
 		break;
+	case EVT_XFER_DONE:
+		dbc->xfer_timestamp = jiffies;
+		poll_interval = 0;
+		break;
 	default:
 		dev_info(dbc->dev, "stop handling dbc events\n");
 		return;

drivers/usb/host/xhci-dbgcap.h

@@ -96,6 +96,7 @@ struct dbc_ep {
 #define DBC_WRITE_BUF_SIZE		8192
 #define DBC_POLL_INTERVAL_DEFAULT	64	/* milliseconds */
 #define DBC_POLL_INTERVAL_MAX		5000	/* milliseconds */
+#define DBC_XFER_INACTIVITY_TIMEOUT	10	/* milliseconds */
 /*
  * Private structure for DbC hardware state:
  */
@@ -142,6 +143,7 @@ struct xhci_dbc {
 	enum dbc_state			state;
 	struct delayed_work		event_work;
 	unsigned int			poll_interval;	/* ms */
+	unsigned long			xfer_timestamp;
 	unsigned			resume_required:1;
 	struct dbc_ep			eps[2];
 
@@ -187,6 +189,7 @@ struct dbc_request {
 enum evtreturn {
 	EVT_ERR	= -1,
 	EVT_DONE,
+	EVT_XFER_DONE,
 	EVT_GSER,
 	EVT_DISC,
 };