wifi: rtw89: Fix rtw89_mac_power_switch() for USB

JIRA: https://issues.redhat.com/browse/RHEL-114891

commit e2b7160
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date:   Mon Jun 30 23:45:55 2025 +0300

    wifi: rtw89: Fix rtw89_mac_power_switch() for USB
    
    Clear some bits in some registers in order to allow RTL8851BU to power
    on. This is done both when powering on and when powering off because
    that's what the vendor driver does.
    
    Also tested with RTL8832BU and RTL8832CU.
    
    Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
    Acked-by: Ping-Ke Shih <pkshih@realtek.com>
    Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
    Link: https://patch.msgid.link/a39da939-d640-4486-ad38-f658f220afc8@gmail.com

Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>

Author: jtornosm

drivers/net/wireless/realtek/rtw89/mac.c

@@ -1440,6 +1440,23 @@ void rtw89_mac_notify_wake(struct rtw89_dev *rtwdev)
 	rtw89_mac_send_rpwm(rtwdev, state, true);
 }
 
+static void rtw89_mac_power_switch_boot_mode(struct rtw89_dev *rtwdev)
+{
+	u32 boot_mode;
+
+	if (rtwdev->hci.type != RTW89_HCI_TYPE_USB)
+		return;
+
+	boot_mode = rtw89_read32_mask(rtwdev, R_AX_GPIO_MUXCFG, B_AX_BOOT_MODE);
+	if (!boot_mode)
+		return;
+
+	rtw89_write32_clr(rtwdev, R_AX_SYS_PW_CTRL, B_AX_APFN_ONMAC);
+	rtw89_write32_clr(rtwdev, R_AX_SYS_STATUS1, B_AX_AUTO_WLPON);
+	rtw89_write32_clr(rtwdev, R_AX_GPIO_MUXCFG, B_AX_BOOT_MODE);
+	rtw89_write32_clr(rtwdev, R_AX_RSV_CTRL, B_AX_R_DIS_PRST);
+}
+
 static int rtw89_mac_power_switch(struct rtw89_dev *rtwdev, bool on)
 {
 #define PWR_ACT 1
@@ -1450,6 +1467,8 @@ static int rtw89_mac_power_switch(struct rtw89_dev *rtwdev, bool on)
 	int ret;
 	u8 val;
 
+	rtw89_mac_power_switch_boot_mode(rtwdev);
+
 	if (on) {
 		cfg_seq = chip->pwr_on_seq;
 		cfg_func = chip->ops->pwr_on_func;

drivers/net/wireless/realtek/rtw89/reg.h

@@ -183,6 +183,7 @@
 
 #define R_AX_SYS_STATUS1 0x00F4
 #define B_AX_SEL_0XC0_MASK GENMASK(17, 16)
+#define B_AX_AUTO_WLPON BIT(10)
 #define B_AX_PAD_HCI_SEL_V2_MASK GENMASK(5, 3)
 #define MAC_AX_HCI_SEL_SDIO_UART 0
 #define MAC_AX_HCI_SEL_MULTI_USB 1