firmware: qcom: scm: take struct device as argument in SHM bridge enable

JIRA: https://issues.redhat.com/browse/RHEL-117514

commit dc3f4e7
Author: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Date:   Mon Jun 30 14:12:03 2025 +0200

    firmware: qcom: scm: take struct device as argument in SHM bridge enable

    qcom_scm_shm_bridge_enable() is used early in the SCM initialization
    routine. It makes an SCM call and so expects the internal __scm pointer
    in the SCM driver to be assigned. For this reason the tzmem memory pool
    is allocated *after* this pointer is assigned. However, this can lead to
    a crash if another consumer of the SCM API makes a call using the memory
    pool between the assignment of the __scm pointer and the initialization
    of the tzmem memory pool.

    As qcom_scm_shm_bridge_enable() is a special case, not meant to be
    called by ordinary users, pull it into the local SCM header. Make it
    take struct device as argument. This is the device that will be used to
    make the SCM call as opposed to the global __scm pointer. This will
    allow us to move the tzmem initialization *before* the __scm assignment
    in the core SCM driver.

    Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
    Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
    Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-2-fa3851c98611@linaro.org
    Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Signed-off-by: Eric Chanudet <echanude@redhat.com>

Author: eric-ch

drivers/firmware/qcom/qcom_scm.c

@@ -1603,7 +1603,13 @@ bool qcom_scm_lmh_dcvsh_available(void)
 }
 EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh_available);
 
-int qcom_scm_shm_bridge_enable(void)
+/*
+ * This is only supposed to be called once by the TZMem module. It takes the
+ * SCM struct device as argument and uses it to pass the call as at the time
+ * the SHM Bridge is enabled, the SCM is not yet fully set up and doesn't
+ * accept global user calls. Don't try to use the __scm pointer here.
+ */
+int qcom_scm_shm_bridge_enable(struct device *scm_dev)
 {
 	int ret;
 
@@ -1615,11 +1621,11 @@ int qcom_scm_shm_bridge_enable(void)
 
 	struct qcom_scm_res res;
 
-	if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP,
+	if (!__qcom_scm_is_call_available(scm_dev, QCOM_SCM_SVC_MP,
 					  QCOM_SCM_MP_SHM_BRIDGE_ENABLE))
 		return -EOPNOTSUPP;
 
-	ret = qcom_scm_call(__scm->dev, &desc, &res);
+	ret = qcom_scm_call(scm_dev, &desc, &res);
 
 	if (ret)
 		return ret;

drivers/firmware/qcom/qcom_scm.h

@@ -83,6 +83,7 @@ int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
 		    struct qcom_scm_res *res);
 
 struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void);
+int qcom_scm_shm_bridge_enable(struct device *scm_dev);
 
 #define QCOM_SCM_SVC_BOOT		0x01
 #define QCOM_SCM_BOOT_SET_ADDR		0x01

drivers/firmware/qcom/qcom_tzmem.c

@@ -20,6 +20,7 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
+#include "qcom_scm.h"
 #include "qcom_tzmem.h"
 
 struct qcom_tzmem_area {
@@ -94,7 +95,7 @@ static int qcom_tzmem_init(void)
 			goto notsupp;
 	}
 
-	ret = qcom_scm_shm_bridge_enable();
+	ret = qcom_scm_shm_bridge_enable(qcom_tzmem_dev);
 	if (ret == -EOPNOTSUPP)
 		goto notsupp;
 

include/linux/firmware/qcom/qcom_scm.h

@@ -148,7 +148,6 @@ bool qcom_scm_lmh_dcvsh_available(void);
 
 int qcom_scm_gpu_init_regs(u32 gpu_req);
 
-int qcom_scm_shm_bridge_enable(void);
 int qcom_scm_shm_bridge_create(u64 pfn_and_ns_perm_flags,
 			       u64 ipfn_and_s_perm_flags, u64 size_and_flags,
 			       u64 ns_vmids, u64 *handle);