Changed 'built-in' (default) LED used with Zephir boards from RED to GREEN.

Author: bogdanarduino

variants/arduino_giga_r1_stm32h747xx_m7/arduino_giga_r1_stm32h747xx_m7.overlay

@@ -463,8 +463,8 @@
 						<&gpioz 2 0>,			/* analog only A10 */
 						<&gpioz 3 0>;			/* analog only A11 */
 
-		builtin-led-gpios = <&gpioi 12 GPIO_ACTIVE_LOW>,
-                        <&gpioj 13 GPIO_ACTIVE_LOW>,
+		builtin-led-gpios = <&gpioj 13 GPIO_ACTIVE_LOW>,
+                        <&gpioi 12 GPIO_ACTIVE_LOW>,
                         <&gpioe 3 GPIO_ACTIVE_LOW>;
 
 		pwm-pin-gpios =	    <&gpioj 9 0>,
@@ -540,23 +540,3 @@
 /* Include common flash filesystem configuration */
 qspi_flash: &n25q128a1 {};
 #include "../common/arduino_flash_fs.dtsi"
-
-/ {
-    zephyr,user {
-        /* Override builtin LED GPIO to point to the green LED */
-        builtin_led_gpios = <&gpioj 13 0>;  /* Pin 13 on GPIOJ for Green LED, active-low */
-    };
-
-	leds {
-		compatible = "gpio-leds";
-		red_led: led_0 {
-			gpios = <&gpioi 12 GPIO_ACTIVE_LOW>; /* Red LED on GPIO pin 12 of GPIOI, active-low */
-		};
-		green_led: led_1 {
-			gpios = <&gpioj 13 GPIO_ACTIVE_LOW>; /* Green LED on GPIO pin 13 of GPIOJ, active-low */
-		};
-		blue_led: led_2 {
-			gpios = <&gpioe 3 GPIO_ACTIVE_LOW>; /* Blue LED on GPIO pin 3 of GPIOE, active-low */
-		};
-	};
-};

variants/arduino_portenta_c33_r7fa6m5bh3cfc/arduino_portenta_c33_r7fa6m5bh3cfc.overlay

@@ -267,8 +267,8 @@
 
 
 
-		builtin-led-gpios = <&ioport1 7 GPIO_ACTIVE_LOW>,
-                        <&ioport4 0 GPIO_ACTIVE_LOW>,
+		builtin-led-gpios = <&ioport4 0 GPIO_ACTIVE_LOW>,
+                        <&ioport1 7 GPIO_ACTIVE_LOW>,
                         <&ioport8 0 GPIO_ACTIVE_LOW>;
 
 		pwm-pin-gpios =	<&ioport6 0 0>;
@@ -302,29 +302,3 @@
 /* Include common flash filesystem configuration */
 qspi_flash: &at25sf128a {};
 #include "../common/arduino_flash_fs.dtsi"
-
-/ {
-    zephyr,user {
-        /* Override builtin LED GPIO to point to the green LED (led2) */
-        builtin_led_gpios = <&ioport4 0 0>;  /* GPIO pin 0 on ioport4 (green LED) */
-    };
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1: led1 {
-			gpios = <&ioport1 7 GPIO_ACTIVE_LOW>; /* Red LED on GPIO pin 7 of ioport1, active-low */
-			label = "LEDR"; /* Label changed to Red LED */
-		};
-
-		led2: led2 {
-			gpios = <&ioport4 0 GPIO_ACTIVE_LOW>; /* Green LED on GPIO pin 0 of ioport4, active-low */
-			label = "LEDG"; /* Label changed to Green LED */
-		};
-
-		led3: led3 {
-			gpios = <&ioport8 0 GPIO_ACTIVE_LOW>; /* Blue LED on GPIO pin 0 of ioport8, active-low */
-			label = "LEDB"; /* Label changed to Blue LED */
-		};
-	};
-};

variants/arduino_portenta_h7_stm32h747xx_m7/arduino_portenta_h7_stm32h747xx_m7.overlay

@@ -337,8 +337,8 @@ qspi_flash: &mx25l12833f {};
 				    <&gpiok 6 0>,		/* LEDG */
 				    <&gpiok 7 0>;		/* LEDB */
 
-		builtin-led-gpios = <&gpiok 5 0>,
-				    <&gpiok 6 0>,
+		builtin-led-gpios = <&gpiok 6 0>,
+				    <&gpiok 5 0>,
 				    <&gpiok 7 0>;
 
 		pwm-pin-gpios =	<&gpioa 8 0>,
@@ -388,26 +388,3 @@ qspi_flash: &mx25l12833f {};
 			      <&adc1 13>; /* Hack for D20 */
 	};
 };
-
-/ {
-    zephyr,user {
-        /* Override builtin LED GPIO to point to the green LED */
-        builtin_led_gpios = <&gpiok 6 0>;  /* Pin 6 on GPIOK, active low */
-    };
-
-    leds {
-        compatible = "gpio-leds";
-        
-        red_led: led_0 {
-            gpios = <&gpiok 5 GPIO_ACTIVE_LOW>;  /* Red LED on GPIO pin 5, active-low */
-        };
-
-        green_led: led_1 {
-            gpios = <&gpiok 6 GPIO_ACTIVE_LOW>;  /* Green LED on GPIO pin 6, active-low */
-        };
-
-        blue_led: led_2 {
-            gpios = <&gpiok 7 GPIO_ACTIVE_LOW>;  /* Blue LED on GPIO pin 7, active-low */
-        };
-    };
-};