update for Portenta H7

replace google search with page from example.com

Author: don

libraries/WiFi/examples/WiFiWebClient/WiFiWebClient.ino

@@ -1,44 +1,34 @@
-
 /*
   Web client
 
- This sketch connects to a website (http://www.google.com)
- using the WiFi module.
-
- This example is written for a network using WPA encryption. For
- WEP or WPA, change the Wifi.begin() call accordingly.
+ This sketch connects to a website (http://example.com) using the WiFi module.
 
  This example is written for a network using WPA encryption. For
  WEP or WPA, change the Wifi.begin() call accordingly.
 
  Circuit:
- * Board with NINA module (Arduino MKR WiFi 1010, MKR VIDOR 4000 and UNO WiFi Rev.2)
+ * Arduino Portenta H7
 
  created 13 July 2010
  by dlf (Metodo2 srl)
  modified 31 May 2012
  by Tom Igoe
  */
 
-
-#include <SPI.h>
-#include <WiFiNINA.h>
+#include <WiFi.h>
 
 #include "arduino_secrets.h" 
 ///////please enter your sensitive data in the Secret tab/arduino_secrets.h
 char ssid[] = SECRET_SSID;        // your network SSID (name)
-char pass[] = SECRET_PASS;    // your network password (use for WPA, or use as key for WEP)
-int keyIndex = 0;            // your network key Index number (needed only for WEP)
+char pass[] = SECRET_PASS;        // your network password (use for WPA, or use as key for WEP)
+int keyIndex = 0;                 // your network key Index number (needed only for WEP)
 
 int status = WL_IDLE_STATUS;
 // if you don't want to use DNS (and reduce your sketch size)
 // use the numeric IP instead of the name for the server:
-//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
-char server[] = "www.google.com";    // name address for Google (using DNS)
+// IPAddress server(93,184,216,34);  // IP address for example.com (no DNS)
+char server[] = "example.com";       // host name for example.com (using DNS)
 
-// Initialize the Ethernet client library
-// with the IP address and port of the server
-// that you want to connect to (port 80 is default for HTTP):
 WiFiClient client;
 
 void setup() {
@@ -49,26 +39,21 @@ void setup() {
   }
 
   // check for the WiFi module:
-  if (WiFi.status() == WL_NO_MODULE) {
+  if (WiFi.status() == WL_NO_SHIELD) {
     Serial.println("Communication with WiFi module failed!");
     // don't continue
     while (true);
   }
 
-  String fv = WiFi.firmwareVersion();
-  if (fv < WIFI_FIRMWARE_LATEST_VERSION) {
-    Serial.println("Please upgrade the firmware");
-  }
-
   // attempt to connect to Wifi network:
   while (status != WL_CONNECTED) {
     Serial.print("Attempting to connect to SSID: ");
     Serial.println(ssid);
     // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
     status = WiFi.begin(ssid, pass);
 
-    // wait 10 seconds for connection:
-    delay(10000);
+    // wait 3 seconds for connection:
+    delay(3000);
   }
   Serial.println("Connected to wifi");
   printWifiStatus();
@@ -78,8 +63,9 @@ void setup() {
   if (client.connect(server, 80)) {
     Serial.println("connected to server");
     // Make a HTTP request:
-    client.println("GET /search?q=arduino HTTP/1.1");
-    client.println("Host: www.google.com");
+    client.println("GET /index.html HTTP/1.1");
+    client.print("Host: ");
+    client.println(server);
     client.println("Connection: close");
     client.println();
   }
@@ -104,7 +90,6 @@ void loop() {
   }
 }
 
-
 void printWifiStatus() {
   // print the SSID of the network you're attached to:
   Serial.print("SSID: ");

libraries/WiFi/examples/WiFiWebClient/arduino_secrets.h

@@ -1,3 +1,2 @@
-
 #define SECRET_SSID ""
 #define SECRET_PASS ""