problem with your linux kernel

[SteveBetter]

Hi, archeYR,

I am sorry that I should put this issue in your intel-sfi linux repository, but it doesn't have an issue place there. Forgive me.

SD card and USB are not working on my Ramos I9 tablet(Intel Z2580 SoC). I put my
rootfs on SD card and use USB rndis function in initramfs as a dubuging tool.
They work fine when using official android kernel (postmarketOS initramfs, debian rootfs), except that kernel panic occurs about
40 minutes after booting up, with memory occupancy rising. Maybe it has some data
to be read out?

Output of your kernel says:

mmc0 Timeout waiting for hardware cmd interupt
SDHCI REGISTER DUMP
mmc1 Timeout waiting for hardware cmd interupt
SDHCI REGISTER DUMP
mmc2 Timeout waiting for hardware cmd interupt
SDHCI REGISTER DUMP

I searched on web, but this seems to be a mysterious problem.
Do you have any solutions?

Components of my tablet:

Atom Z2580 (Cloverview, platform Clover Trail+)
PowerVR SGX544 MP2 @ 533 MHz (34.1 GFLOPs) 	

Cirrus Logic CS42L73 - I2C bus1                                          supported in mainline
sound
/devices/platform/ctp_rhb_cs42l73/sound/card4/input4

max17047 - I2C bus2                                                            supported in mainline
feulgauge

smb347 - I2C bus2                                                                supported in mainline

FocalTech ft5x0x_ts - I2C bus2                                             supported in mainline
/devices/virtual/input/input0

camera pdata: I2C bus = 4, name =           ov5645               supported in mainline
camera pdata: I2C bus = 4, name =           ov2675


STMicroelectronics lsm303cmp - I2C bus5                           supported in mainline(maybe)			
a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. These best-in-class eCompass device

STMicroelectronics lps331ap - I2C bus5
digital barometer measures pressures, easily be converted to altitudes

BMA250 - I2C bus5                                                                supported in mainline
triaxial, low-g acceleration sensor, Accelerometer
/devices/virtual/input/input1

DesignWare max3111 - SPI														
SPI -> UART, RS232

tc35876_lcd_init:TC35876 LVDS module                               supported in mainline
lvds, mipi
lg_lp079x01_lcd_init:AUO B080XAN01 module                     not found in mainline
sp_ltl089cl02_lcd_init
sp_ltl089cl02_lcd_vid_probe: SP LTL089CL02 panel detected                not found in mainline 

sdhci-pci

bcm4330                                                                                 supported in mainline
wifi

This is official kernel dmesg output
https://logpaste.com/irjO7nXd

My .config file with your intel-sfi linux kenel
https://logpaste.com/0M7nNv5J

According to this page:
https://wiki.postmarketos.org/wiki/Intel_MID

Cloverview
Note 	It seems to have regular ACPI, but the same debugging capabilities as MID platforms: https://www.spinics.net/lists/platform-driver-x86/msg03871.html

Does that mean we can use mainline ACPI on this SoC?

[SteveBetter]

Hardware information

lshw
https://logpaste.com/8fhFzWRH

lspci
https://logpaste.com/t6mLxvuS