diff --git a/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7946.dts b/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7946.dts
deleted file mode 100644
index b37c548a2561ca..00000000000000
--- a/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7946.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Analog Devices AD7946
- * https://www.analog.com/en/products/ad7946.html
- *
- * hdl_project: <pulsar_adc/coraz7s>
- * Link: https://github.com/analogdevicesinc/hdl/tree/main/projects/pulsar_adc
- * board_revision: <A>
- *
- * Copyright (C) 2022 Analog Devices Inc.
- */
-/dts-v1/;
-#include "zynq-coraz7s.dtsi"
-#include "zynq-coraz7s-axi-sysid.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	vref: regulator-vref {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-supply";
-		regulator-min-microvolt = <4096000>;
-		regulator-max-microvolt = <4096000>;
-		regulator-always-on;
-	};
-};
-
-&fpga_axi {
-
-	adc_trigger: pwm@44b00000 {
-		compatible = "adi,axi-pwmgen-2.00.a";
-		reg = <0x44b00000 0x1000>;
-		label = "adc_conversion_trigger";
-		#pwm-cells = <2>;
-		clocks = <&clkc 15>, <&spi_clk>;
-		clock-names = "axi", "ext";
-	};
-
-	spi_engine: spi@44a00000 {
-		compatible = "adi,legacy-axi-spi-engine-1.00.a";
-		reg = <0x44a00000 0x10000>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clkc 15 &spi_clk>;
-		clock-names = "s_axi_aclk", "spi_clk";
-		num-cs = <1>;
-
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-
-		adc@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "adi,pulsar,ad7946";
-			reg = <0>;
-			spi-max-frequency = <80000000>;
-			clocks = <&spi_clk>;
-			clock-names = "ref_clk";
-			dmas = <&rx_dma 0>;
-			dma-names = "rx";
-			pwms = <&adc_trigger 0 0>;
-			pwm-names = "cnv";
-			vref-supply = <&vref>;
-			channel@0 {
-				reg = <0>;
-				diff-channels = <0 1>;
-			};
-		};
-	};
-
-	rx_dma: dma-controller@44a30000 {
-		compatible = "adi,axi-dmac-1.00.a";
-		reg = <0x44a30000 0x1000>;
-		#dma-cells = <1>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clkc 16>;
-	};
-
-	spi_clk: clock-controller@44a70000 {
-		compatible = "adi,axi-clkgen-2.00.a";
-		reg = <0x44a70000 0x10000>;
-		#clock-cells = <0>;
-		clocks = <&clkc 15>, <&clkc 15>;
-		clock-names = "clkin1", "s_axi_aclk";
-		clock-output-names = "spi_clk";
-	};
-};
diff --git a/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7984.dts b/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7984.dts
deleted file mode 100644
index 9d93e7f1c40a2d..00000000000000
--- a/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7984.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Analog Devices AD7984
- * https://www.analog.com/en/products/ad7984.html
- *
- * hdl_project: <pulsar_adc/coraz7s>
- * Link: https://github.com/analogdevicesinc/hdl/tree/main/projects/pulsar_adc
- * board_revision: <A>
- *
- * Copyright (C) 2022 Analog Devices Inc.
- */
-/dts-v1/;
-#include "zynq-coraz7s.dtsi"
-#include "zynq-coraz7s-axi-sysid.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	vref: regulator-vref {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-supply";
-		regulator-min-microvolt = <4096000>;
-		regulator-max-microvolt = <4096000>;
-		regulator-always-on;
-	};
-};
-
-&fpga_axi {
-
-	adc_trigger: pwm@44b00000 {
-		compatible = "adi,axi-pwmgen-2.00.a";
-		reg = <0x44b00000 0x1000>;
-		label = "adc_conversion_trigger";
-		#pwm-cells = <2>;
-		clocks = <&clkc 15>, <&spi_clk>;
-		clock-names = "axi", "ext";
-	};
-
-	spi_engine: spi@44a00000 {
-		compatible = "adi,legacy-axi-spi-engine-1.00.a";
-		reg = <0x44a00000 0x10000>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clkc 15 &spi_clk>;
-		clock-names = "s_axi_aclk", "spi_clk";
-		num-cs = <1>;
-
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-
-		adc@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "adi,pulsar,ad7984";
-			reg = <0>;
-			spi-max-frequency = <80000000>;
-			clocks = <&spi_clk>;
-			clock-names = "ref_clk";
-			dmas = <&rx_dma 0>;
-			dma-names = "rx";
-			pwms = <&adc_trigger 0 0>;
-			pwm-names = "cnv";
-			vref-supply = <&vref>;
-			channel@0 {
-				reg = <0>;
-				bipolar;
-				diff-channels = <0 1>;
-			};
-		};
-	};
-
-	rx_dma: dma-controller@44a30000 {
-		compatible = "adi,axi-dmac-1.00.a";
-		reg = <0x44a30000 0x1000>;
-		#dma-cells = <1>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clkc 16>;
-	};
-
-	spi_clk: clock-controller@44a70000 {
-		compatible = "adi,axi-clkgen-2.00.a";
-		reg = <0x44a70000 0x10000>;
-		#clock-cells = <0>;
-		clocks = <&clkc 15>, <&clkc 15>;
-		clock-names = "clkin1", "s_axi_aclk";
-		clock-output-names = "spi_clk";
-	};
-};